An integrated framework for elevator traffic design under general traffic conditions using origin destination matrices,virtual interval,and the Monte Carlo simulation method

Abstract

The conventional design methodology for elevator traffic analysis has been applied to the case of up-peak traffic (or incoming traffic conditions). The only user requirements are usually the expected arrival rate (AR%) expressed as a percentage of the building population requesting service in the peak 5 min and the target interval. The interval as classically used will be referred to as the physical interval in this paper as it is only relevant for the case of a single entrance and incoming traffic conditions. This paper presents an integrated methodology for the design of elevator traffic systems for the general case of mixed traffic conditions. It presents a fully integrated framework that covers the steps from user requirements to the selection of the number of required elevators. The user requirements describing the traffic conditions can be specified by the user, expressed as the AR%, the mix of incoming traffic, outgoing traffic, and interfloor traffic. This paper derives equations that can be used to combine the mix of traffic, the floor arrival percentages, and the floor population percentages into an origin–destination matrix. The origin–destination matrix is then adjusted and normalized in order to account for rational passenger behavior (i.e., a passenger will not travel to the same floor that he or she is at). A method is presented for the random generation of passenger origin–destination pairs using the origin–destination matrix (which is necessary when using the Monte Carlo Simulation (MCS) method to calculate the round trip time). A novel equation for evaluating the round trip time under the assumption of equal floor heights and top speed attained in one floor journey is derived and used. The equation is derived using a stepwise derivation and verification process. The verification is carried out against the MCS method for finding the value of the round trip time. The concept of a virtual interval (as opposed to the conventionally used physical interval usually used in elevator traffic system design) is introduced in order to allow the selection of the number of elevators to be carried out. The virtual interval is the average value of the time between the consecutive reversals of the elevators in the group.

Practical application The methodology presented in this paper allows the elevator traffic system designer to convert the user requirements specification (in the form of an arrival rate and the percentage floor strengths) into an origin–destination matrix. The origin–destination matrix is a more suitable tool for calculating the expected value of the round trip time and consequently carrying out an elevator traffic design. Thus, this methodology represents a vital step in the design process.

Keywords

Elevator lift round trip time physical interval virtual interval incoming traffic outgoing traffic interfloor traffic general traffic conditions Monte Carlo Simulation origin–destination matrix

Get full access to this article

View all access options for this article.

References

Barney

. Elevator traffic handbook: theory and practice, London and New York: Spon Press, 2003. . ISBN 0-415-27476-1.

CIBSE. CIBSE guide D: transportation systems in buildings. 4th ed. Chartered Institute of Building Services Engineers, 2010, p. 4-2, section 4.3.2. CIBSE: UK.

British Council for Offices. BCO Guide to Specification 2009. London: British Council for Offices, 2009.

Peters

. Lift traffic analysis: formulae for the general case. Build Serv Eng Res Technol 1990; 11: 65–67.

Hakonen H and Lahdelma R. Calculation of elevator round-trip time for the collective control algorithm in general traffic situations. Finland: Turku Centre for Computer Science, TUCS Technical Report No. 671, March 2005.

Al-Sharif

Abu Alqumsan

. Stepwise derivation and verification of a universal elevator round trip time formula for general traffic conditions. Build Serv Eng Res Technol 2015; 36: 311–330. DOI: 10.1177/0143624414542111.

Al-Sharif

Abu Alqumsan

Abdel Aal

. Automated optimal design methodology of elevator systems using rules and graphical methods (the HARint plane). Build Serv Eng Res Technol 2013; 34: 275–293. DOI: 10.1177/0143624412441615.

Al-Sharif

Abdel Aal

Abu Alqumsan

. The HARint space: a methodology for compliant elevator traffic designs. Build Serv Eng Res Technol 2015; 36: 34–50. Published online before print 20 June 2014. DOI: 10.1177/0143624414539968.

Basagoiti R, Beamurgia M, Peters R, et al. Origin destination matrix estimation and prediction in vertical transportation. In: Second symposium on lift and escalator technologies, University of Northampton, Northampton, UK, 27th September 2012, pp.20–29.

10.

Basagoiti R, Beamurgia M, Peters R, et al. Passenger flow pattern learning based on trip counting in lift systems combined with on-line information. In: Third symposium on lift and escalator technologies, University of Northampton, Northampton, UK, 26th–27th September 2013, pp.20–29.

11.

Kuusinen J-M, Sorsa J and Siikonen M-L. The elevator trip origin-destination matrix estimation problem. Transport Sci. Articles in advance, pp. 1–18, 2014, INFORMS. Published Online: May 8, 2014. Available at: https://dx-doi-org.web.bisu.edu.cn/10.1287/trsc.2013.0509.

12.

Kuusinen J-M and Malapert A. The effect of randomisation on constraint based estimation of elevator trip origin-destination matrices. In: Fourth symposium on lift and escalator technologies, Northampton, UK: University of Northampton, 25–26 September 2014, pp.115–126.

13.

Siikonen M-L. Procedure for controlling an elevator group where virtual passenger traffic is generated. US patent number 6 345 697 B1, 12th February 2002.

14.

Kameli N. Predictor elevator for traffic during peak conditions. US patent number 5 276 295, 4th January 1994.

15.

Hakonen H and Siikonen M-L. Elevator traffic simulation procedure. In: Elevator Technology 17, proceedings of Elevcon Thessaloniki 2008, Thessaloniki, Greece, June 2008, pp. 131–141, published by the International Association of Elevator Engineers, UK.

16.

Al-Sharif

Dahyat

Al-Kurdi

. The use of Monte Carlo Simulation in the calculation of the elevator round trip time under up-peak conditions. Build Serv Eng Res Technol 2012; 33(3): 319–338.