Analysis on combinations of indoor thermal microclimate parameters in radiant cooled residential buildings and drawing of new thermal comfort charts

Abstract

This paper proposed to discuss some issues about indoor microclimate parameters design in radiant cooled residential buildings. Based on the thermal comfort model, the relationships between low mean radiant temperature and other thermal microclimate parameters such as indoor air temperature, air velocity, and relative humidity were analyzed. The improved and reasonable combinations of four thermal microclimate parameters including radiant cooling surface temperature, air temperature, air velocity, and relative humidity were further derived. Furthermore, a number of new thermal comfort charts using radiant cooling surface temperature and air temperature as dominant parameters were drawn. The results show that the air temperature can be increased 1–3℃ within the recommended thermal comfort range when the mean radiant temperature is reduced 3℃. Under the design goal of thermal neutral, when the chilled ceiling surface temperature is in the range of 16–26℃, the air temperature should be set at 25.3–29.3℃; when the chilled floor surface temperature is in the range of 19–26℃, the air temperature should be set at 25.8–29.2℃. The design values of air velocity and relative humidity are not recommended to be changed, and still can follow the design standards for conventional all-air systems.

Practical application : In this paper, some issues about indoor microclimate parameters design in radiant cooled buildings were discussed. A number of new thermal comfort charts using radiant cooling surface temperature and air temperature as dominant parameters were provided, and the design values of indoor air temperature, mean radiant temperature, air velocity, and relative humidity for radiant cooling system in residential buildings were also suggested. The research results can provide a more intuitive reference for the design of radiant cooling systems in residential buildings.

Keywords

Residential building radiant cooling thermal comfort thermal microclimate parameter thermal comfort chart

Get full access to this article

View all access options for this article.

References

Wilkins

Kosonen

. Cool ceiling system: a European air-conditioning alternative. ASHRAE J 1992, pp. 41–45.

Chao

Zhang

. Feasibility analysis of energy efficiency reformation of an existing office build in glob by with floor panel cooling and heating system. Heat Ventilating Air Cond 2010; 40: 56–60.

Zou

. Design of air conditioning system for Tianjin Railway Station. Heat Ventilating Air Cond 2010; 40: 32–35.

Fan

. Study and application of floor panel heating/cooling system in lobbies of Wukesong Gymnasium. Heat Ventilating Air Cond 2005; 35: 87–90.

Memon

Chirarattananon

Vangtook

. Thermal comfort assessment and application of radiant cooling: a case study. Build Environ 2008; 43: 1185–1196.

Imanari

Omori

Bogaki

. Thermal comfort and energy consumption of the radiant ceiling panel system: comparison with the conventional all-air system. Energ Build 1999; 30: 167–175.

Tian

Love

. Energy performance optimization of radiant slab cooling using building simulation and field measurements. Energ Build 2009; 41: 320–330.

Niu

Zhang

. Energy savings potential of chilled-ceiling combined with desiccant cooling in hot and humid climates. Energ Build 2002; 34: 487–495.

Wang

Morimoto

. Evaluating the low exergy of chilled water in a radiant cooling system. Energ Build 2008; 40: 1856–1865.

10.

Oxizidis

Papadopoulos

. Performance of radiant cooling surfaces with respect to energy consumption and thermal comfort. Energ Build 2013; 57: 199–209.

11.

Yang W. The investigation of thermal comfort and thermal adaptation in residential buildings during the summer season of hot summer/cold winter region. Master Thesis, Hunan University, Changsha, 2007.

12.

Building Energy Research Center of Tsinghua University. 2008 annual report on China building energy efficiency, Beijing: China Architecture & Building Press, 2008.

13.

Niu

. A review of the application of radiant cooling & heating systems in Mainland China. Energ Build 2012; 52: 11–19.

14.

Lin

Sui

. Design of air conditioning system for an apartment hotel in Shanghai. Heat Ventilating Air Cond 2008; 38: 98–102.

15.

Huang

Liu

. Experimental study of a ground source heat pump air conditioning system with low temperature radiant cooling in Chongqing. Heat Ventilating Air Cond 2008; 38: 15–19.

16.

Han

Zhang

. System form analysis and energy consumption calculation of radiant ceiling and outdoor air system using chiller unit as cold source. Build Sci 2007; 23: 40–43.

17.

Sui

Zhang

Han

. Winter testing and performance analysis on a residential floor heating system combining with a fresh air handling unit. Fluid Mach 2009; 37: 53–56.

18.

Zhou

Yang

. Experimental study on cooling operation characteristics of radiant floor combined with fresh air system in summer. Build Sci 2010; 26: 36–39.

19.

Sui

Zhang

Han

. Performance analysis on a residential radiant chilled ceiling system and evaluation on indoor thermal environment in summer: an application. Build Serv Eng Res Technol 2013; 34: 317–331.

20.

Han

Zhang

. Experimental study on a residential temperature–humidity separate control air-conditioner. Energ Build 2011; 43: 3584–3591.

21.

Liu

Zhang

Zhou

. Experimental research of bi-evaporator residential air-conditioner running at variable conditions. Acta Energ Solaris Sinica 2012; 33: 302–307.

22.

ASHRAE. ASHRAE handbook-fundamentals, Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers Inc, 2009.

23.

ASHRAE. ASHRAE Standard 55-2010: Thermal environment conditions for human occupancy, Atlanta: American Society of Heating, Refrigerating and Air Conditioning Engineers Inc, 2010.

24.

National Standard of the People’s Republic of China. GB 50019-2003: code for design of heating ventilation and air conditioning, Beijing: China Architecture & Building Press, 2003.

25.

Professional Standard of the People’s Republic of China. JGJ 134-2010: design standard for energy efficiency of residential buildings in hot summer and cold winter zones of China, Beijing: China Architecture & Building Press, 2010.

26.

. Practical manual for HVAC design, Beijing: China Architecture & Building Press, 2008.

27.

Sui XM. Study on sharing rate of cooling load of radiant terminal device and air supply terminal device in residential buildings. PhD Thesis, Tongji University, Shanghai, 2009.

28.

ISO. ISO-11855: Building environment design – design, dimensioning, installation and control of embedded radiant heating and cooling systems, Geneva: International Organization for Standardization, 2012.

29.

CEN. EN 15377: Heating systems in buildings-design of embedded water based surface heating and cooling systems, Brussels: The European Committee for Standardization, 2008.

30.

National Standard of the People’s Republic of China. GB 50736-2012: Design code for heating ventilation and air conditioning of civil buildings, Beijing: China Architecture & Building Press, 2012.

31.

National Standard of the People’s Republic of China. GB 50189-2005: design standard for energy efficiency of public buildings, Beijing: China Architecture & Building Press, 2005.

32.

Huang

Zhang

. Human and thermal environment, Beijing: Science Press, 2011.

33.

Nicol

Humphreys

. Adaptive thermal comfort and sustainable thermal standard for building. Energ Build 2002; 34: 563–572.

34.

Fanger

. Thermal comfort: analysis and application in environmental engineering, New York, NY: McGraw-Hill Book Company, 1972.

35.

Nicol

Raja

Allaudin

. Climatic variations in comfortable temperatures: The Pakistan projects. Energ Build 1999; 30: 261–279.

36.

de Dear

Richard

Brager

. Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55. Energ Build 2002; 34: 549–561.

37.

Zhang

Gao

. Evaluation method of natural ventilation system based on thermal comfort in China. Energ Build 2009; 41: 67–70.

38.

ISO. ISO 7730: moderate thermal environments: determination of the PMV and PPD indices and specification of the conditions for thermal comfort, Geneva: International Standard Organization for Standardization, 2005.

39.

Howell

Kenney

. Field validation of the Fanger thermal comfort model. Hum Factors 1979; 21: 229–239.

40.

Holzle

Munson

McCullougb

. A validation study of the ASHRAE summer comfort envelope. ASHRAE Trans 1983; 90: 126–138.

41.

Tanabe

Kimura

Hara

. Thermal comfort requirements during the summer season in Japan. ASHRAE Trans 1987; 93: 564–577.

42.

de Dear

Auliciems

. Validation of the predicted vote model of thermal comfort in six Austrian field studies. ASHRAE Trans 1985; 91: 452–468.

43.

Oseland

. A comparison of the predicted and reported thermal sensation vote in homes during winter and summer. Energ Build 1994; 21: 45–54.

44.

Dennis

. Designing for thermal comfort in combined chilled ceiling/displacement ventilation environments. ASHRAE Trans 1998; 101: 901–910.

45.

Orosa

Oliveira

. A new thermal comfort approach comparing adaptive and PMV models. Renew Energ 2011; 36: 951–956.

46.

Wang

. A field study of the thermal comfort in residential buildings in Harbin. Build Environ 2006; 41: 1034–1039.

47.

Zhang

. Heat transfer, Beijing: China Architecture & Building Press, 2001.

48.

Wang

. Low temperature radiant heating and radiant cooling, Beijing: Machinery Industry Press, 2004.