Experimental investigation of the novel BIPV/T system employing micro-channel flat-plate heat pipes

Abstract

In this paper, the micro-channel flat-plate heat pipes-based BIPV/T system has been proposed, which is expected to have the characteristics, e.g. reduced contact thermal resistance, enhanced heat transfer area, improved heat transfer efficiency and building integration. The proposed system was constructed at the laboratory of Guangdong University of Technology (China) to study its performance. The temperatures of the glass cover, PV panel, micro-channel flat-plate heat pipes, and tank water were measured, as well as the ambient temperature. The thermal and electrical efficiency was also calculated for the system operated under the conditions with different simulated radiations and water flow rates. It was found that the proposed system can achieve the maximum average overall efficiency of 50.4% (thermal efficiency of 45.9% and electrical efficiency of 4.5%) for the simulated radiation of 300 W/m² and water flow rate of 600 L/h. By comparing the proposed system with the two previous systems employing the conventional heat pipes, the thermal efficiency of the proposed system was clearly improved. The research will develop an innovative BIPV/T technology possessing high thermal conduction capability and high thermal efficiency compared with the conventional BIPV/T system, and helps realise the global targets of reducing carbon emission and saving primary energy in buildings.

Practical application: This novel BIPV/T employing micro-channel flat-plate heat pipes will be potentially used in buildings to provide amount of electricity and thermal energy. The generated electricity will be used by the residents for electrical devices, and the thermal energy can be used for hot water, even for space heating and cooling.

Keywords

Micro-channel flat-plate heat pipes building integrated photovoltaic/thermal performance investigation comparison

Get full access to this article

View all access options for this article.

References

Pérez-Lombard

Ortiz

Pout

. A review on buildings energy consumption information. Energy Build 2008; 40: 394–398.

Lin

Liao

Lin

. Performance analysis and load matching of a photovoltaic-thermoelectric hybrid system. Energy Convers Manage 2015; 105: 891–899.

Biaou

Bernier

. Achieving total domestic hot water production with renewable energy. Build Environ 2008; 43: 651–660.

Buker

Riffat

. Building integrated solar thermal collectors – a review. Renew Sust Energy Rev 2015; 51: 327–346.

Ghani

Duke

Carson

. Effect of flow distribution on the photovoltaic performance of a building integrated photovoltaic/thermal (BIPV/T) collector. Solar Energy 2012; 86: 1518–1530.

Henemann

. BIPV: built-in solar energy. Renew Energy Focus 2008; 9: 14–19.

Al-Waeli

Sopian

Kazem

et al.

Photovoltaic/thermal (PV/T) systems: status and future prospects. Renew Sust Energy Rev 2017; 77: 109–130.

Chow

. An experimental study of facade-integrated photovoltaic/water-heating system. Appli Therm Eng 2007; 27: 37–45.

Yang

. Environmental payback time analysis of a roof-mounted building-integrated photovoltaic (BIPV) system in Hong Kong. Appl Energ 2010; 87: 3625–3631.

10.

Shukla

Sudhakar

Baredar

. Exergetic analysis of building integrated semitransparent photovoltaic module in clear sky condition at Bhopal India. Case Stud Therm Eng 2016; 8: 142–151.

11.

Yoon

Shim

et al.

An experimental study on the annual surface temperature characteristics of amorphous silicon BIPV window. Energy Build 2013; 62: 166–175.

12.

Norton

Eames

Mallick

et al.

Enhancing the performance of building integrated photovoltaics. Solar Energy 2011; 85: 1629–1664.

13.

Trinuruk

Sorapipatana

Chenvidhya

. Estimating operating cell temperature of BIPV modules in Thailand. Renew Energy 2009; 34: 2515–2523.

14.

Shan

Tang

Cao

et al.

Comparative simulation analyses on dynamic performances of photovoltaic-thermal solar collectors with different configurations. Energy Convers Manage 2014; 87: 778–786.

15.

Yang

Athienitis

. A review of research and developments of building-integrated photovoltaic/thermal (BIPV/T) systems. Renew Sust Energy Rev 2016; 66: 886–912.

16.

Ibrahim

Othman

Ruslan

et al.

Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors. Renew Sust Energy Rev 2011; 15: 352–365.

17.

Gang

Huide

Tao

et al.

A numerical and experimental study on a heat pipes PV/T system. Solar Energy 2011; 85: 911–921.

18.

Moradgholi

Nowee

Abrishamchi

. Application of heat pipes in an experimental investigation on a novel photovoltaic/thermal (PV/T) system. Solar Energy 2014; 107: 82–88.

19.

Wang

Qiu

Yang

et al.

Experimental investigation of the thermal and electrical performance of the heat pipes BIPV/T system with metal wires. Appl Energy 2016; 170: 314–323.

20.

Deng

Zhao

Wang

et al.

Experimental investigation of performance for the novel flat plate solar collector with micro-channel heat pipes array (MHPA-FPC). Appl Therm Eng 2013; 54: 440–449.

21.

Zhu

Diao

Zhao

et al.

Thermal performance of a new CPC solar air collector with flat micro-heat pipes arrays. Appl Therm Eng 2016; 98: 1201–1213.

22.

Hou

Quan

Zhao

et al.

An experimental and simulative study on a novel photovoltaic-thermal collector with micro heat pipes array (MHPA-PV/T). Energy Build 2016; 124: 60–69.

23.

Deng

Zhao

Quan

et al.

Experimental study of the thermal performance for the novel flat plate solar water heater with micro heat pipes array absorber. Energy Proc 2015; 70: 41–48.

24.

Zhang

et al.

Performance analysis on a solar concentrating thermoelectric generator using the micro-channel heat pipes array. Energy Convers Manage 2016; 112: 191–198.

25.

Zhang

Yang

et al.

Performance analysis of a heat pipes PV/T system with different circulation tank capacities. Appl Therm Eng 2015; 87: 89–97.

26.

Saygin

Nowzari

Mirzaei

et al.

Performance evaluation of a modified PV/T solar collector: a case study in design and analysis of experiment. Solar Energy 2017; 141: 210–221.