Field investigations on operational performance of a novel radiant floor heating equipment applied in a typical office building

Abstract

Low-temperature radiant heating systems are widely used in buildings with significant energy conservation, and they are convenient for the utilization of low-grade energy resources and household metering. In this study, the practical application of a novel radiant floor heating system (RFHS) in cold regions is investigated via construction of an experimental platform for energy consumption and thermal comfort in an office building in Tianjin, China. The results indicated that the novel radiant floor exhibits higher heating capacity and heat transfer coefficient than that of a traditional radiant floor. During the experiment, the average indoor temperature was 25.0°C in the office room and 22.7°C in the conference room, and all instantaneous indoor temperatures exceeded 21°C. To avoid local thermal discomfort, the supply water temperature of the floor can be appropriately decreased by 2–3°C for operation. Additionally, the power consumption of the system is decreased by approximately 11.4% if the indoor temperature is decreased to 20°C. Hence, a 10-h operation mode per day can be adopted in the office building for energy conservation given that the novel radiant floor exhibits superior initial response to intermittent operation.

Practical application: In this study, the practical application effect of a new type of water-passing floor is examined in cold regions to provide a design reference for engineering applications. Therefore, it is expected that the results will be helpful to researchers for indoor environments, heating, ventilating, and air conditioning engineers, system manufacturers, and those who want to analyze the operational performance of a radiant floor heating system.

Keywords

Radiant floor heating system ASHP energy consumption heating performance thermal comfort

Get full access to this article

View all access options for this article.

References

Rhee

K-N

Kim

. A 50 year review of basic and applied research in radiant heating and cooling systems for the built environment. Building Environ 2015; 91: 166–190. DOI: 10.1016/j.buildenv.2015.03.040.

Niu

. A review of the application of radiant cooling and heating systems in Mainland China. Energy and Buildings 2012; 52: 11–19. DOI: 10.1016/j.enbuild.2012.05.030.

Hwang

Y-J

Jeong

J-W

. Energy saving potential of radiant floor heating assisted by an air source heat pump in residential buildings. Energies 2021; 14: 1321. DOI: 10.3390/en14051321.

Zheng

You

Zhang

, et al. Defrosting performance improvement of air-source heat pump combined refrigerant direct-condensation radiant floor heating system with phase change material. Energies 2020; 13: 4594. DOI: 10.3390/en13184594.

Cejudo López

Hernández

Muñoz

, et al. The optimization of the operation of a solar desiccant air handling unit coupled with a radiant floor. Energy and Buildings 2013; 62: 427–435. DOI: 10.1016/j.enbuild.2013.03.030.

Lee

Yang

, et al. Experimental study and assessment of high-tech thermal energy storing radiant floor heating system with latent heat storage materials. Int J Therm Sci 2020; 155: 106410. DOI: 10.1016/j.ijthermalsci.2020.106410.

Zhang

Guo

, et al. Development of a new method to estimate thermal performance of multilayer radiant floor. J Building Eng 2021; 33: 101562. DOI: 10.1016/j.jobe.2020.101562.

Chen

Zhang

, et al. Field study on winter heating performance of the air source heat pump system in cold regions. Int J Heat Tech 2020; 38: 213–222. DOI: 10.18280/ijht.380123.

Yang

Dong

Zhang

, et al. Heating and energy storage characteristics of multi-split air source heat pump based on energy storage defrosting. Appl Energ 2019; 238: 303–310. DOI: 10.1016/j.apenergy.2019.01.079.

10.

Zhang

Liu

X-H

Jiang

. Simplified calculation for cooling/heating capacity, surface temperature distribution of radiant floor. Energy and Buildings 2012; 55: 397–404. DOI: 10.1016/j.enbuild.2012.08.026.

11.

Brănoaea

Burlacu

Ciocan

, et al. Numerical investigation of a novel heat pipe radiant floor heating system with integrated phase change materials. Proceedings 2020; 63: 15. DOI: 10.3390/proceedings2020063015.

12.

Park

Kim

. Analysis of the thermal storage performance of a radiant floor heating system with a PCM. Molecules 2019; 24: 1352. DOI: 10.3390/molecules24071352.

13.

Cheng

Chen

. Study on indoor comfort of floor radiant cooling and displacement ventilation system in large space. IOP Conf Ser Earth Environ Sci 2019; 238: 012078. DOI: 10.1088/1755-1315/238/1/012078.

14.

. Experimental research on performance of radiant floor heating system based on micro heat pipe array (in Chinese). Sichuan Building Sci 2019; 45: 90–96.

15.

Yeom

Jung

. Improving a heating supply water temperature control for radiant floor heating systems in Korean high-rise residential buildings. Sustainability 2019; 11: 3926. DOI: 10.3390/su11143926.

16.

Echarri-Iribarren

Wong

Sánchez-Ostiz

. Radiant floors versus radiant walls using ceramic thermal panels in mediterranean dwellings: Annual energy demand and cost-effective analysis. Sustainability 2021; 13: 588. DOI: 10.3390/su13020588.

17.

Shin

Rhee

, et al. The thermal output evaluation of radiant heating panels by experiment. Building Serv Eng Res Tech 2015; 36: 580–595. DOI: 10.1177/0143624415570343.

18.

Zhou

. Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes. Appl Energ 2015; 138: 648–660. DOI: 10.1016/j.apenergy.2014.10.058.

19.

Cho

Park

Lim

. Experimental and numerical study on the application of low-temperature radiant floor heating system with capillary tube: Thermal performance analysis. Appl Therm Eng 2019; 163: 114360. DOI: 10.1016/j.applthermaleng.2019.114360.

20.

Dong

Zhang

Liu

. Combination of new type water floor heating channel optimization and energy saving analysis. Fluid Mechinery 2014; 42: 74–77.

21.

ASHRAE, ASHRAE Standard, 55-2013, Thermal Environmental Conditions for Human Occupancy, American Society of Heating. Atlanta: Refrigerating and Air Conditioning Engineers , 2013.

22.

ISO, ISO 7730-2010, Ergonomics of the Thermal Environment - Analytical Determination and Interpretation of Thermal Comfort using Calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria. Switzerland: International Organization for Standardization , 2010.

23.

Holman

. Experimental Methods for Engineers. 8th ed. New York, NY: McGraw-Hill, 2012.

24.

Kim

D-W

Joe

G-S

Park

S-H

, et al. Experimental evaluation of the thermal performance of raised floor integrated radiant heating panels. Energies 2017; 10: 1632. DOI: 10.3390/en10101632.