Fin-type cold bridges: Heat loss and surface temperature

Abstract

This paper describes theoretical modelling of fin-type cold bridges carried out as part of a programme of research into the effect of cold bridges on heat loss and condensation in buildings. One-dimensional fin theory is used to show that in many buildings, fins on the exterior of the envelope do not increase the local rate of heat loss and, therefore, do not lead to additional problems of cold bridging. The ratio of heat loss from a building envelope with fins to that from one without is found to decrease with increasing external heat transfer coefficient. A common cold bridge (a floor slab penetrating an external cavity wall) is analysed in detail by the finite element method. The effect of extending the floor slab to make an external fin (e.g. as a balcony) was found to have an insignificant effect on both heat loss and surface condensation risk. One-dimensional fin analysis is developed to produce a simple thermal model of externally extended cold bridges of utility in estimating minimum internal surface temperature.

Get full access to this article

View all access options for this article.

References

1 Saunders C H and Cornish J P Dampness: one week's complaints in five local authorities in England and Wales (Garston: Building Research Establishment) (1982)

2 Loudon A G and Hendry I W L Ventilation and condensation control in Condensation in Buildings eds Croome D J and Sherratt A F C (Applied Science Publishers) (1972)

3 Davies M G

Computing the rate of superficial and interstitial condensation

Building Sci. 8 97–104 (1973)

4 Burberry P Practical thermal design in buildings (London: Batsford) (1983)

5 Galbraith G H and Brundrett G W

Dehumidifiers in houses

Proc. Symp. Condensation and mould growth in housing, BRE, Watford (April 1983)

6 Southern J R Methods of improving insulation Internal Building Research Station report

7 CIBSE Guide Section A3: Thermal properties of building structures (London: Chartered Institution of Building Services Engineers) (1986)

8 Berman A M Designing for energy conservation: the way forward, in Energy conservation and thermal insulation ed. Derricott R and Chissick S S pp 289–307 (Chichester: Wiley) (1981)

9 Bacon C W

Deck access housing

Housing Planning Rev. 40 (2) 19–21 (1985)

10.

10 Wong H Y Heat transfer for engineers pp 28–29 (London: Longman) (1977)

11.

11 Cole R J and Sturrock N S

The convective heat exchange at the external surface of buildings

Building Env. 12 207–214 (1977)