A Study on the Effect of Porous CaCO 3 on Micro-Cellular Plastics as an Additive for Nucleation

Abstract

Plastics are widely used in industry, in that they are light and easily manufactured. Much research is being conducted currently to increase the strengths and to reduce the price of the material.

Foaming techniques are used to achieve insulation properties, to reduce weight, and to reduce the material cost. Due to their unique properties, foamed plastics are applied to refrigerator, pipe, and insulators. In 1980, Micro-cellular foaming was invented at MIT. By applying the outstanding foaming technique, many small cells are generated in the polymer matrices and micro-cellular foamed plastics show relatively high specific strength.

We investigated the role of CaCO₃, which is one of the most widely used additives in the plastics industry, for nucleation in view of cell morphology. Porous CaCO₃ chemically treated to increase the dispersibility and to lower the density was used in this study. Two experiments were conducted in order to check the role of the additive for nucleation. One is the compound-ability test and the other is for the role as nucleation agents.

References

Tang

C.Y.

, and Liang

J.Z.

“A Study of the melt flow behavior of ABS/ CaCO3 composites,”

Journal of Materials Processing Technology 138 (2003), 408–410.

Liang

J.Z.

, Tang

C.Y.

, Li

R.K.Y.

, and Wong

T.T.

“Mechanical Properties of Polypropylene/ CaCO3 Composites,”

Metals and Materials, Vol. 4, No. 4 (1998), pp. 616–619.

da Silva

A.L.N.

, Rocha

M.C.G.

, Moraes

M.A.R.

, Valente

C.A.R.

, Coutinho

F.M.B.

“Mechanical and rheological properties of composites based on polyolefin and mineral additives,”

Polymer Testing 21 (2002), 57–60.

Zhu

, hang

Y. Z.

, Zhang

“Effect of CaCO3/LiCO3 on the HCI generation of PVC during combustion,”

Polymer Testing 22 (2003), 539–543.

Kawai

Tomoji

2002, “Nano technology,” Japanese Engineering Investment Society, Japan.

Kap

J. Sung

2003, “Noise reduction in information storage devices using microcellular foamed plastics,” S.M. Thesis, Department of Mechanical Engineering, Yonsei University, Korea.

Kelvin

T. Okamoto

2003, “Microcellular Processing,” Hanser Gardner Publications, Inc. Cincinnati.

Martini

J.E.

, Waldman

F.A.

, and Suh

N.P.

1982, “The Production and Analysis of Microcellular Thermoplastic Foam,” Society of Plastic Engineers Technical Papers, Vol. 28, pp. 674–676.

Waldman

F.A.

1982, “The Processing of Microcellular Foam,” S.M. Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA.

10.

Park

C.B.

, and Suh

N.P.

“Rapid Polymer/Gas Solution Formation for Continuous Processing of Microcellular Plastics,”

ASME Transactions, Journal of Manufacturing Science and Engineering (Journal of Engineering for Industry), Vol. 118, No. 4, pp. 639–645, 1996.

11.

Jingyi

, Pierick

David

“Reciprocating-Screw Injection Molding Machine for Microcellular Foam,” Society of Plastic Engineers Technical Papers, (2001), pp. 449–454.

12.

Cha

S.W.

1994, “A Microcellular Foaming/Forming Process Performed at Ambient Temperature and a Supermicrocellular Foaming Process,” Ph.D. Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA.

13.

Park

, Behravesh

A.H.

, and Venter

R.D.

“Chapter 8 - A Strategy for Suppression of Cell Coalescence in the Extrusion of Microcellular HIPS Foams,” in: Polymeric Foams: Science and Technology, Khemani

, ed., ACS, Washington, pp. 115–129, 1996.