Hearing Thresholds and Equal Loudness Contours in Free Field at Frequencies below 1 kHz

Abstract

Hearing thresholds for pure sinusoidal tones were determined in a free field at frequencies from 25 Hz to 1 kHz. Contours of equal loudness were determined at the same frequencies at loudness levels from 20 phon to 80 phon in steps of 20 phon. 12 subjects participated.

The psychometric method used for the threshold determinations was the method of limits. The deviations from minimum audible field values given in ISO/R226 were small (3 dB at most frequencies).

For the measurement of equal loudness the reference was a 1 kHz tone, and other tones were compared to that. The psychometric method was the method of limits. The resulting equal loundess contours were positioned at much higher levels than those of ISO/R226. Similar results have recently been reported by others. At low loudness levels the results were in good agreement with the curves obtained by Fletcher and Munson, but at high loudness levels they were also above their curves.

Some of the points of equal loudness were also determined by a maximum likelihood estimation method. The results differed slightly from those obtained by the method of limits.

Get full access to this article

View all access options for this article.

References

Fletcher

Munson

W.A.

“Loudness, it's Definition, Measurement and Calculation”, Journal of the Acoustical Society of America, Vol. 5, 82–108 (1933).

Churcher

B.G.

King

A.J.

, “The Performance of Noise Meter in Terms of the Primary Standard”, Journal of the Institute of Electrical Engineers, Vol. 81, 57–90 (1937).

Robinson

D.W.

Dadson

R.S.

, “A Re-determination of the Equal Loudness Relations for Pure Tones”, British Journal of Applied Physics, Vol. 7, 166–181 (1956).

Kingsbury

B.A.

, “A Direct Comparison of the Loudness of Pure Tones”, Physical Review, Vol. 29, 588–600 (1927).

Sivian

L.J.

White

S.D.

, “On Minimum Audible Sound Fields”, Journal of the Acoustical Society of America, Vol. 4, 288–321 (1933).

ISO Recommendation R226, “Normal equal-loudness contours for pure tones and normal threshold of hearing under free field listening conditions” (1961).

Moller

Andresen

, “Loudness of Pure Tones at Low and Infrasonic Frequencies” Journal of Low Frequency Noise and Vibration, Vol. 3, No. 2, 78–87 (1984).

Suzuki

Kono

Sone

Kumagai

Miura

Kado

, “Equal-loudness level contours for pure tone under free field listening conditions – (1) some data and consideration on experimental conditions”. Journal of Acoustical Society of Japan, Vol. 10, No. 6 (1989).