Coordinated Motion Planning for a Mobile Manipulator considering Stability and Manipulation

Abstract

For a mobile manipulator to be used in areas such as offices and houses, it is desirable that the mobile platform be small sized. In the case of a small-sized platform, the mobile manipulator may tip over when moving at high speed or executing tasks in the presence of disturbances. Therefore, it is necessary to simultaneously consider both stabilization and manipulation while coordinating vehicle motion and manipulator motion. In this paper, we first present the concept of the valid stable region to evaluate stability in the presence of disturbances. Next, we propose a method for coordinating vehicle motion planning including manipulator configuration, and manipulator motion planning including platform stability. Then, the optimal problem of vehicle motion is formulated, taking into account vehicle dynamics, manipulator workspace, and system stability. Also, the manipulator motion is derived, considering stability compensation and manipulator configuration. Finally, the effectiveness of the proposed method is demonstrated by simulation examples.

Get full access to this article

View all access options for this article.

References

Carriker, F., Khosla, P. K., and Krogh, B. H. 1991. Path planning for mobile manipulators for multiple task execution . IEEE Trans. on Robotics and Automation 7(3): 403–408 .

Chong, N., Yokoi, K., Oh, S., and Tanie, K. 1997. Position control of a collision-tolerant passive mobile manipulator with base suspension characteristics . Proceedings of IEEE International Conference on Robotics and Automation, April 20–25, Albuquerque, NM, pp. 594–599 .

Dubins, L. E. 1957. An curve of minimal length with a constraint on average curvature, and with prescribed initial and terminal position and tangents . American J. of Mathematics 79: 497–516 .

Dubowsky, S., and Vance, E. E. 1989. Planning mobile manipulator motions considering vehicle dynamic stability constrains . Proceedings of IEEE International Conference on Robotics and Automation, May 14–19, Scottsdale, AZ, pp. 1271–1276 .

Fukuda, T., and Fujisawa, Y. 1992. Manipulator/vehicle system for man-robot cooperation . Proceedings of IEEE International Conference on Robotics and Automation, May 12–14, Nice, France, pp. 74–79 .

Ghasempoor, A., and Sepehri, N. 1995. A measure of stability for mobile base manipulator . Proceedings of IEEE International Conference on Robotics and Automation, May 21–27, Nagoya, Japan, pp. 2249–2254 .

Hootsmans, N.A.M., and Dubowsky, S. 1991. Large motion control of mobile manipulators including vehicle suspension characteristics . Proceedings of IEEE International Conference Robotics and Automation, April 9–11, Sacramento, CA, pp. 2236–2341 .

Huang, Q., Tanie, K., and Sugano, S. 1999. Stability compensation of a mobile manipulator by manipulator motion: Feasibility and planning . Advanced Robotics 13(1): 25–40 .

Jacobs, P., Laumond, J. P., and Taix, M. 1991. Efficient motion planners for nonholonomic mobile robots . Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, November 3–5, Osaka, Japan, pp. 1229–1235 .

10.

Kanayama, Y., and Miyake, N. 1985. Trajectory generation for mobile robots . Proceedings of 3rd International Symposium of Robotics Research, October 7–11, Gouvieux, France, pp. 330–340 .

11.

Khatib, O., Yokoi, K., Chang, K., Ruspini, D., Holmberg, R., and Casal, A. 1996. Coordination and decentralized cooperation of multiple mobile manipulators . J. of Robotic Systems 13(11): 755–764

12.

Koyachi, N., Arai, T., Adachi, H., Asami, K., and Itoh, Y. 1995. Hexapod with integrated limb mechanism of leg and arm . Proceedings of International Conference on Robotics and Automation, May 21–27, Nagoya, Japan, pp. 1952–1957 .

13.

Luenberger, D. G. 1973. Introduction to Linear and Nonlinear Programming. Reading, MA: Addision-Wesley .

14.

Marin, S. P. 1984. An approach to data parametrization in parametric cubic spline interpolation problems . J. of Approximation Theory 41: 64–86 .

15.

Meessuri, D. A., and Vance, E. E. 1985. Automatic body regulation for maintaining stability of a legged vehicle during rough-terrain locomotion . IEEE J. of Robotics and Automation RA-1(3): 132–141 .

16.

Nelson, W. 1989. Continuous-curvature paths for autonomous vehicles . Proceedings of IEEE International Conference on Robotics and Automation, May 14–19, Scottsdale, AZ, pp. 1260–1264 .

17.

Pinchard, O., Liegeois, A., and Pougnet, F. 1996. Generalized polar polynomials for vehicle path generation with dynamic constraints . Proceedings of IEEE International Conference on Robotics and Automation, April 22–28, Minneapolis, MN, pp. 915–920 .

18.

Rey, D. A., and Papadopoulos, E. G. 1997. On-line automatic tipover for a mobile manipulator . Proceedings of IEEE/RSJ International Conference on Intelligent Robotics and Automation, September 7–11, Grenoble, France, pp. 1273–1278 .

19.

Seraji, H. 1992. Task-based configuration control of redundant manipulators . J. of Robotic Systems 9(3): 411–451 .

20.

Seraji, H. 1998. A unified approach to motion control of mobile manipulators . Int. J. Robotics and Research 17(2): 107–118 .

21.

Shampine, L., and Gordon, M. 1975. Computer Solution of Ordinary Differential Equations. San Francisco: Freeman .

22.

Takanishi, A., Egusa, Y., Tochizawa, M., Takeya, T., and Kato, I. 1988. Realization of dynamic biped walking stabilized with trunk motion . RoManSy 7: Proceedings of 7th CISM-IFTToMM Symposium on Theory and Practice of Robots and Manipulators, September 12–15, Udine, Italy, pp. 68–79 .

23.

Vukobratovic, M., and Juricic, D. 1969. Contribution to the synthesis of biped gait . IEEE Trans. on Bio-Medical Engineering BME-16(1): 1–6 .

24.

Yamamoto, Y., and Yun, X. 1994. Coordinating locomotion and manipulation of a mobile manipulator . IEEE Trans. on Automatic Control 39(6): 1326–1332 .

25.

Yoneda, K., and Hirose, S. 1996. Tumble stability criterion of integrated locomotion and manipulation . Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, November 4–8, Osaka, Japan, pp. 870–876 .

26.

Yoshikawa, T. 1984. Manipulability of robotic mechanisms . Proceedings 2nd International Symposium of Robotic Research, August 20-23, Kyoto, Japan, pp. 91–98 .