General Methodology for Type Synthesis of Symmetrical Lower-Mobility Parallel Manipulators and Several Novel Manipulators

Abstract

In the area of parallel robots, the use of lower-mobility parallel manipulators for many tasks requiring fewer than six degrees of freedom (DoF) has drawn a lot of interest. This paper treats one fundamental problem in the study of lower-mobility parallel manipulators: type synthesis. Using reciprocal screw theory, we define the mechanism constraint system and limb constraint system. We then investigate the relations between the mechanism constraint system and the limb constraint system under different geometrical conditions. Three tables describing the relations are presented. Based on the three tables, we propose a constraint-synthesis method for type synthesis of symmetrical lower-mobility parallel manipulators. The method used in the paper to construct the kinematic structure of the limb of lower-mobility parallel manipulators with prescribed DoF is simple and systematic. Examples are included to illustrate the application of the method and some novel lower-mobility parallel manipulators with 3-, 4- and 5-DoF are synthesized.

Keywords

parallel mechanism type synthesis design theory

Get full access to this article

View all access options for this article.

References

Ball, R.S. 1900. The Theory of Screws, Cambridge University Press.

Clavel, R. 1988. Delta, a fast robot with parallel geometry. Proceedings of the Int. Symp. On Industrial Robot, Switzerland , pp. 91-100.

Clavel, R. , Bouri, S. , and Grousset, M. 1999. Thurneysen, a new 4 dof parallel robot: the Manta. Proceedings of the Int. Workshop on Parallel Kinematic Machines PKM'99, Milan, Italy, pp. 95-100.

Cox, D. , and Tesar, D. 1989. The dynamic model of a three degrees of freedom parallel robotics shoulder module. Advanced Robotics, Proceedings Of the 4th Int. Conf. On Advanced Robotics, Waldron, p. 475. Springer-Verlag .

Di Gregorio, R. 2000. Closed-form solution of the position analysis of the pure translational 3-RUU parallel mechanism. Proceedings of the 8th Symposium on Mechanisms and Mechanical Transmissions, MTM 2000, Timisoara, Romania, pp. 119-124.

Di Gregorio, R. 2001. Kinematics of a new spherical parallel manipulator with three equal legs: the 3-urc wrist. Journal of Robotic Systems 18(5):213-219.

Di Gregorio, R. , and Parenti-Castelli, V. 1998. A translational 3-DoF parallel manipulator. Advances in Robot Kinematics: Analysis and Control, ed. J. Lenarcic and M. L. Husty , pp. 49-58. Kluwer.

Di Gregorio, R. , and Parenti-Castelli, V. 1999. Mobility analysis of 3-UPU parallel mechanism assembled for a pure translational motion. Proceedings of the 1999 IEEE/ASME International Conference on Advanced Intelligence Mechatronics, AIM'99, Atlanta (Georgia), pp. 520-525.

Gosselin, C.M. 1993. On the kinematic design of spherical 3-dof parallel manipulators . International Journal of Robotics Research 12(4):394-402.

10.

Gosselin, C.M. , and Angeles, J. 1989. The optimum kinemaic design of a spherical 3-dof parallel manipulator. ASME Journal of Mechanisms, Transmissions and Automation in Design 111(2):202-207.

11.

Gosselin, C.M. , Sefrioui, J. , and Richard, M.J. 1992. On the direct kinematics of a class spherical 3-dof parallel manipulator. 22nd Biennial Mechanisms Conf., Scottsdale , pp. 13-19.

12.

Gosselin, C.M. , Perreault, L. , and Vaillancourt, C. h. 1995. Simulation and computer-aided kinematic design of three-degree-of freedom spherical parallel manipulators . Journal of Robotic Systems 12(12):857-869.

13.

Gosselin, C.M. , and St-Pierre, E. 1997. Development and experimentation of a fast 3-dof camara-orienting device. International Journal of Robotics Research 16(5):619-630.

14.

Herve, J.M. 1999. The Lie group of rigid body displacements, a fundamental tool for mechanism design. Mechanism and Machine Theory 34:719-730.

15.

Huang, Z. , and Fang, Y.F. 1996. Kinematic characteristics analysis of 3-dof in-parallel actuated pyramid mechanisms. Mechanism and Machine Theory 31(8):1009-1018.

16.

Huang, Z. , Fang, Y.F. , and Kong, L.F. 1997. Mechanism Theory and Control of Parallel Manipulators . Beijing: China Machine Press.

17.

Hunt, K.H. 1978. Kinematic Geometry of Mechanisms, Oxford University Press.

18.

Merlet, J.-P. 1989. Singular configuration of parallel manipulators and Grassman geometry. International Journal of Robotics Research 8:45-56.

19.

Merlet, J.-P. 1999. Parallel robot: open problems. 9th Int. Symp. of Robotics Research, Snowbird, 9-12.

20.

Stamper, R.E. , Tsai, L.W. , and Walsh, G.C. 1997. Optimization of a three DoF translational platform for well-conditioned workspace. IEEE International Conference on Robotics and Automation, Albuquerque, New Mexico, pp. 3250-3255.

21.

Tsai, L.W. 1997. Multi-degree-of-freedom mechanisms for machine tools and the like. U.S. Patent No. 5656905.

22.

Tsai, L.W. 1999. The enumeration of a class of three-dof parallel manipulators . Tenth World Congress on the Theory of Machines and Mechanisms, Finland, 1123-1126.

23.

Tsai, L.W. 2000. Kinematics and optimization of a spatial 3-upu parallel manipulator. ASME Journal of Mechanical Design 122:439-446.

24.

Tsai, L.W. , and Stamper, R. 1996. A parallel manipulator with only translational degrees of freedom. ASME 1996 Design Eng. Technical Conf , Irvine, CA, DETC96-MECH-1152.

25.

Zlatanov, D. , and Gosselin, C.M. 2001. A new parallel architecture with four degrees of freedom . Proceedings of the 2nd workshop on Computational Kinematics, May 19-22, Seoul, Korea, pp. 57-66.