Computing Wrench Cones for Planar Rigid Body Contact Tasks

Abstract

The contribution of this paper is the expansion of the range of possibilities in the analysis, planning, and control of contact tasks. The successful execution of any contact task fundamentally requires the application of wrenches (forces and moments) consistent with the task. We develop an algorithm for computing the entire set of external wrenches consistent with achieving a given augmented contact mode (e.g., sliding at contact 1, rolling at contact 2, and approaching potential contact 3) for one fixed and one moving part in the plane.

Unfortunately, because of the problem of frictional indeterminacy, it is usually not enough to determine the set of wrenches consistent with achieving a contact mode. Some of the computed wrenches may also be consistent with other undesirable contact modes. However, set operations on the cones returned by our algorithm can be designed to find the wrenches consistent only with desired contact modes.

In this paper we also present some applications of the algorithm to analysis and planning problems. We show how to use set operations to compute the set of external wrenches with respect to which a fixtured part is `strongly stable'. If the applied external wrench is in this set, the part is guaranteed not to move. We also show how the algorithm may be used to create sensorless plans that guarantee that a workpiece will be correctly inserted into a fixture.

Keywords

fixturing assembly contact tasks rigid bodies multibody dynamics contact modes polyhedral convex cones sensorless insertion grasp analysis

Get full access to this article

View all access options for this article.

References

Anitescu, M. , and Potra, F. 1997. Formulating multi-rigid-body contact problems with friction as solvable linear complementarity problems. ASME Journal of Nonlinear Dynamics, 14:231-247.

Austin, D. and McCarragher, B. September 1997. Robust discrete event controller synthesis for constrained motion systems. In Symposium on Robot Control, Elsevier. pp. 801- 807.

Balkcom, D. , Gottlieb, E. , and Trinkle, J. 2002. A sensorless insertion strategy for rigid planar parts . In Proceedings, IEEE International Conference on Robotics and Automation, pp. 882-887.

Balkcom, D. , Trinkle, J. , and Gottlieb, E. 2002. Computing wrench cones for planar contact tasks. In Proceedings, IEEE International Conference on Robotics and Automation, pp. 869-875.

Brost, R. and Peters, R. January 1997. Automatic design of 3D fixtures and assembly pallets. Technical Report SAND95-2411, Sandia National Laboratories.

Brost, R.C. January 1991. Analysis and Planning of Planar Manipulation Tasks. Ph.D. thesis, Carnegie Mellon University School of Computer Science.

Cottle, R.W. , Pang, J. , and Stone, R.E. 1992. The Linear Complementarity Problem. New York: Academic Press.

Erdmann, M.A. August 1984. On motion planning with uncertainty. Master's thesis, MIT Department of Electrical Engineering and Computer Science.

Erdmann, M.A. June 1994. On a representation of friction in configuration space. International Journal of Robotics Research, 13(3):240-271.

10.

Erdmann, M.A. and Mason, M.T. August 1988. An exploration of sensorless manipulation . IEEE Journal of Robotics and Automation, 4(4):369-379.

11.

Goldman, A.J. and Tucker, A.W. 1956. Polyhedral convex cones. In H. W. Kuhn and A. W. Tucker , editors, Linear Inequalities and Related Systems, pp. 19-40. Princeton, NJ: Princeton Univ. Press.

12.

Hirai, S. March 1991. Analysis and Planning of Manipulation Using the Theory of Polyhedral Convex Cones. Ph.D. thesis, Kyoto University.

13.

Lötstedt, P. 1982. Mechanical systems of rigid bodies subject to unilateral constraints. SIAM Journal of Applied Mathematics, 42(2):281-296.

14.

Mason, M.T. 2001. Mechanics of Robotic Manipulation. Cambridge, MA: MIT Press.

15.

McCarragher, B. and Asada, H. 1992. A discrete event controller using petri nets applied to assembly. In Proceedings, IEEE International Conference on Intelligent Robots and Systems, pp. 2087-2094.

16.

Nguyen, V. June 1988. Constructing force-closure grasps. International Journal of Robotics Research, 7(3):3-16.

17.

Pang, J. and Trinkle, J. 2000. Stability characterizations of rigid body contact problems with Coulomb friction. Zeitschrift für Angewandte Mathematik und Mechanik, 80(10):643-663.

18.

Pfeiffer, F. and Glocker, C. 1996. Multibody Dynamics with Unilateral Contacts. New York: Wiley.

19.

Prattichizzo, D. and Bicchi, A. April 1998. Dynamic analysis of mobility and graspability of general manipulation systems. IEEE Transactions on Robotics and Automation, 14(2):241-258.

20.

Reuleaux, F. 1876. The Kinematics of Machinery. London : Macmillan. (republished in 1963 by Dover, New York).

21.

Sarkar, N. , Yun, X. , and Kumar, V. 1997. Dynamic control of 3D rolling contacts in two-arm manipulation . IEEE Transactions on Robotics and Automation, 13(3):364-376.

22.

Schimmels, J.M. and Peshkin, M.A. 1994. Force assembly with friction. IEEE Transactions on Robotics and Automation, 10(4):465-497.

23.

Trinkle, J. , Pang, J. , Sudarsky, S. , and Lo, G. 1997. On dynamic multi-rigid-body contact problems with Coulomb friction. Zeitschrift für Angewandte Mathematik und Mechanik , 77(4):267-279.

24.

Trinkle, J. and Zeng, D. April 1995. Prediction of the quasi-static planar motion of a contacted rigid body. IEEE Transactions on Robotics and Automation, 11(2):229-246.

25.

Whitney, D.E. March 1982. Quasi-static assembly of compliantly supported rigid parts. Journal of Dynamic Systems, Measurement, and Control, 104:65-77.