Parallel Elastic Actuators as a Control Tool for Preplanned Trajectories of Underactuated Mechanical Systems

Abstract

A lack of sufficient actuation power as well as the presence of passive degrees of freedom are often serious constraints for feasible motions of a robot. Installing passive elastic mechanisms in parallel with the original actuators is one of a few alternatives that allows for large modifications of the range of external forces or torques that can be applied to the mechanical system. If some motions are planned that require a nominal control input above the actuator limitations, then we can search for auxiliary spring-like mechanisms complementing the control scheme in order to overcome the constraints. The intuitive idea of parallel elastic actuation is that spring-like elements generate most of the nominal torque required along a desired trajectory, so the control efforts of the original actuators can be mainly spent in stabilizing the motion. Such attractive arguments are, however, challenging for robots with non-feedback linearizable non-minimum phase dynamics that have one or several passive degrees of freedom. We suggest an approach to resolve the apparent difficulties and illustrate the method with an example of an underactuated planar double pendulum. The results are tested both in simulations and through experimental studies.

Keywords

compliant actuators underactuated mechanical systems motion planning walking robots virtual holonomic constraints

Get full access to this article

View all access options for this article.

References

Alexander, R. ( 1990). Three uses for springs in legged locomotion. The International Journal of Robotics Research, 9(2): 53-61.

Aoustin, Y. and Formal’sky, A. ( 1999). Design of reference trajectory to stabilize desired nominal cyclic gait of a biped. Proceedings of the International Workshop on Robot Motion and Control, Kiekrz, Poland.

Arakelian, V. and Ghazaryan, S. ( 2008). Improvement of balancing accuracy of robotic systems: application to leg orthosis for rehabilitation devices. Mechanism and Machine Theory, 43(5): 565-575.

Freidovich, L. , Robertsson, A. , Shiriaev, A. and Johansson, R. ( 2008). Periodic motions of the Pendubot via virtual holonomic constraints: theory and experiments. Automatica, 44(3): 785-791.

Gosselin, C. ( 2008). Gravity compensation, static balancing and dynamic balancing of parallel mechanisms. Smart Devices and Machines for Advanced Manufacturing . London, Springer, pp. 27-48.

Herder, J. ( 2001). Energy-free Systems: Theory, Conception and Design of Statically Balanced Spring Mechanisms. PhD thesis, Delft University of Technology.

Hobbelen, D. , de Boer, T. and Wisse, M. ( 2008). System overview of bipedal robots Flame and TUlip: tailor-made for limit cycle walking. Proceedings of the 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, Nice, France.

Hurst, J. , Chestnutt, J. and Rizzi, A. ( 2004). An actuator with physically variable stiffness for highly dynamic legged locomotion. Proceedings of the 2004 IEEE International Conference on Robotics and Automation, New Orleans, LA.

Kazerooni, H. ( 1989). Design and analysis of a statically balanced direct-drive manipulator. IEEE Control Systems Magazine, 9(2): 30-34.

10.

Khalil, H. ( 2002). Nonlinear systems, 3rd edition. Englewood Cliffs, NJ, Prentice-Hall .

11.

Mettin, U. , La Hera, P. , Freidovich, L. , Shiriaev, A. and Helbo, J. ( 2008). Motion planning for humanoid robots based on virtual constraints extracted from recorded human movements. Intelligent Service Robotics, 1(4): 289-301.

12.

Morita, T. and Sugano, S. ( 1995). Design and development of a new robot joint using a mechanical impedance adjuster. Proceedings of the 1995 IEEE International Conference on Robotics and Automation, Nagoya , Japan.

13.

Pratt, G. and Williamson, M. ( 1995). Series elastic actuators. Proceedings of the 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems, Pittsburg, PA.

14.

Scheinman, V. and McCarthy, J. ( 2008). Mechanisms and actuation. Springer Handbook of Robotics . Heidelberg, Springer, pp. 67-86.

15.

Shigley, J. and Mischke, C. ( 1989). Mechanical Engineering Design, 5th edition. Singapore McGraw-Hill.

16.

Shiriaev, A. , Freidovich, L. and Manchester, I. ( 2008). Can we make a robot ballerina perform a pirouette? Orbital stabilization of periodic motions of underactuated mechanical systems. Annual Reviews in Control, 32(2): 200-211.

17.

Shiriaev, A. , Perram, J. and Canudas-de-Wit, C. ( 2005). Constructive tool for orbital stabilization of underactuated nonlinear systems: virtual constraints approach. IEEE Transactions on Automatic Control, 50(8): 1164-1176.

18.

Spong, M. and Block, D. ( 1996). Pendubot User Manual. Urbana-Champaign, IL, University of Illinois.

19.

Tuijthof, G. and Herder, J. ( 2000). Design, actuation and control of an anthropomorphic robot arm. Mechanism and Machine Theory, 35(7): 945-962.

20.

van der Wijk, V. , Herder, J. and Demeulenaere, B. ( 2009). Comparison of various dynamic balancing principles regarding additional mass and additional inertia. ASME Journal of Mechanisms and Robotics, in press.

21.

Van Ham, R. , Van Damme, M. , Verrelst, B. , Vanderborght, B. and Lefeber, D. ( 2007). MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: a 3DOF joint with two independent compliances . International Applied Mechanics, 43(4): 467-474.

22.

Vanderborght, B. , Verrelst, B. , Van Ham, R. , Van Damme, M. , Beyl, P. and Lefeber, D. ( 2008). Development of a compliance controller to reduce energy consumption for bipedal robots. Autonomous Robots, 24(4): 419-434.

23.

Verrelst, B. , Van Ham, R. , Vanderborght, B. , Lefeber, D. , Daerden, F. and Van Damme, M. ( 2006). Second generation pleated pneumatic artificial muscle and its robotic applications. Advanced Robotics, 20(7): 783-805.

24.

Westervelt, E. , Grizzle, J. , Chevallereau, C. , Choi, J. and Morris, B. ( 2007). Feedback Control of Dynamic Bipedal Robot Locomotion . Boca Raton, FL, CRC Press.

25.

Yang, T. , Westervelt, E. , Schmiedeler, J. and Bockbrader, R. ( 2008). Design and control of a planar bipedal robot ERNIE with parallel knee compliance. Autonomous Robots, 25(4): 317-330.