Robots consisting of several concentric, preshaped, elastic tubes can work dexterously in narrow, constrained, and/or winding spaces, as are commonly found in minimally invasive surgery. Previous models of these “active cannulas” assume piecewise constant precurvature of component tubes and neglect torsion in curved sections of the device. In this paper we develop a new coordinate-free energy formulation that accounts for general preshaping of an arbitrary number of component tubes, and which explicitly includes both bending and torsion throughout the device. We show that previously reported models are special cases of our formulation, and then explore in detail the implications of torsional flexibility for the special case of two tubes. Experiments demonstrate that this framework is more descriptive of physical prototype behavior than previous models1 it reduces model prediction error by 82% over the calibrated bending-only model, and 17% over the calibrated transmissional torsion model in a set of experiments.
Alterovitz, R., Goldberg, K., Pouliot, J., Taschereau, R. and Hsu, I.-C. ( 2003). Sensorless planning for medical needle insertion procedures . IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3337-3343.
2.
Ames, W.F. ( 1968). Nonlinear Ordinary Equations in Transport Processes . New York, Academic Press.
3.
Antman, S.S. ( 2005). Nonlinear Problems of Elasticity, 2nd edition. New York, Springer.
4.
Arun, K.S., Huang, T.S. and Blostein, S.D. ( 1987). Least-squares fitting of two 3-D point sets. IEEE Transactions on Pattern Analysis and Machine Intellegence, 9(5): 698-700.
5.
Bergou, M., Wardetzky, M., Robinson, S., Audoly, B. and Grinspun, E. ( 2008). Discrete elastic rods. SIGGRAPH (ACM Transactions on Graphics), 27: 34-35.
6.
Bishop, R.L. ( 1975). There is more than one way to frame a curve. The American Mathematical Monthly, 82(3): 246- 251.
7.
Camarillo, D.B., Milne, C.F., Carlson, C.R., Zinn, M.R. and Salisbury, J.K. ( 2008). Mechanics modeling of tendon-driven continuum manipulators . IEEE Transactions on Robotics, 24(6): 1262-1273.
8.
Chirikjian, G.S. ( 1995). Kinematic synthesis of mechanisms and robotic manipulators with binary actuators. Journal of Mechanical Design, 117: 573-580.
9.
Chirikjian, G.S. ( 2011). Stochastic Models, Information Theory, and Lie Groups, Volume 2. Boston, MA, Birkhäuser (to appear).
10.
Chirikjian, G.S. and Burdick, J.W. ( 1995). Kinematically optimal hyper-redundant manipulator configurations . IEEE Transactions on Robotics and Automation , 11(6): 794-806.
11.
Chirikjian, G.S. and Kyatkin, A.B. ( 2001). Engineering applications of noncommutative harmonic analysis , Boca Raton, FL: CRC Press.
12.
Dario, P., Carrozza, M.C., Marcacci, M., D’Attanasio, S., Magnami, B. and Tonet, G.M.O. ( 2000). A novel mechatronic tool for computer-assisted arthroscopy . IEEE Transactions on Information Technology in Biomedicine , 4(1): 15-29.
13.
Daum, W. ( 2003). A deflectable needle assembly. Patent6,572,593.
14.
DiMaio, S.P. and Salcudean, S.E. ( 2005). Interactive simulation of needle insertion models . IEEE Transactions on Biomedical Engineering, 52(7): 1167-1179.
15.
Dupont, P.E., Lock, J. and Butler, E. ( 2009). Torsional kinematic model for concentric tube robots . IEEE International Conference on Robtics and Automation, pp. 3851-3858.
16.
Ediz, K. and Olgac, N. ( 2004). Microdynamics of the piezodriven pipettes in ICSI . IEEE Transactions on Biomedical Engineering, 51(7): 1262-1268.
17.
Furusho, J., Katsuragi, T., Kikuchi, T., Suzuki, T., Tanaka, H., Chiba, Y. and Horio, H. ( 2006). Curved multi-tube systems for fetal blood sampling and treatments of organs like brain and breast. Journal of Computer Assisted Radiology and Surgery, 1: 223-226.
18.
Glozman, D. and Shoham, M. ( 2007). Image-guided robotic flexible needle steering . IEEE Transactions on Robotics, 23(3): 459-467.
19.
Gravagne, I.A. ( 2002). Design, Analysis and Experimentation: the Fundamentals of Continuum Robotic Manipulators. Ph.D. thesis, Clemson University.
20.
Gravagne, I.A. and Walker, I.D. ( 2000). Kinematic transformations for remotely-actuated planar continuum robots. IEEE International Conference on Robotics and Automation, pp. 19-26.
21.
Hannan, M.W. and Walker, I.D. ( 2003). Kinematics and the implementation of an elephant’s trunk manipulator and other continuum style robots. Journal of Robotic Systems, 20(2): 45-63.
22.
Jones, B.A., McMahan, W., and Walker, I.D. ( 2006). Practical kinematics for real-time implimentation of continuum robots. IEEE International Conference on Robotics and Automation pp. 1840-1847.
23.
Kehrbaum, S. and Maddocks, J.H. ( 1997). Elastic rods, rigid bodies, quaternions and the last quadrature. Philosophical Transactions: Mathematical, Physical and Engineering Sciences, 355: 2117-2136.
24.
Kim, J.S. and Chirikjian, G.S. ( 2006). Conformational analysis of stiff chiral polymers with end-constraints. Molecular Simulation, 32(14): 1139-1154.
25.
Kumar, R., Kapoor, A. and Taylor, R.H. ( 2003). Preliminary experiments in robot/human cooperative microinjection . IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3186-3191.
26.
Loser, M. ( 2002). A New Robotic System for Visually Controlled Percutaneous Interventions under X-ray or CT-Fluoroscopy. Master’s thesis, The Albert-Ludwig-University, Freiburg , Germany.
27.
Mahvash, M. and Dupont, P. ( 2008). Bilateral teleoperation of flexible surgical robots . Workshop Proceedings, New Vistas and Challenges in Telerobotics. IEEE International Conference on Robotics and Automation , pp. 58-64.
28.
Murray, R.M., Li, Z. and Sastry, S.S. ( 1994). A Mathematical Introduction to Robotic Manipulation . Boca Raton, FL, CRC Press.
29.
Okazawa, S., Ebrahimi, R., Chuang, J., Salcudean, S.E. and Rohling, R. ( 2005). Hand-held steerable needle device. IEEE/ASME Transactions on Mechatronics, 10(3): 285- 296.
30.
Park, J. and Chung, W.-K. ( 2005). Geometric integration on Euclidean group with application to articulated multi-body systems. IEEE Transactions on Robotics , 21(5): 850- 863.
31.
Rucker, D.C., Jones, B. and Webster III, R.J. ( 2010). A model for concentric tube continuum robots under applied wrenches. IEEE International Conference on Robotics and Automation, in press.
32.
Rucker, D.C. and Webster, R.J., III ( 2008). Mechanics-based modeling of bending and torsion in active cannulas. IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics, pp. 704-709.
33.
Rucker, D.C. and Webster, R.J., III ( 2009a). Mechanics of bending, torsion, and variable precurvature in multi-tube active cannulas. IEEE International Conference on Robotics and Automation, pp. 2533-2537.
34.
Rucker, D.C. and Webster, R.J., III (2009b). Parsimonious evaluation of concentric-tube continuum robot equilibrium conformation. IEEE Transactions on Biomedical Engineering , 56: 2308-2311.
35.
Sears, P. and Dupont, P.E. ( 2006). A steerable needle technology using curved concentric tubes. IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2850- 2856.
36.
Sears, P. and Dupont, P.E. ( 2007). Inverse kinematics of concentric tube steerable needles . IEEE International Conference on Robotics and Automation, pp. 1887-1892.
37.
Selig, J. and Ding, X. ( 2001). A screw theory of static beams. IEEE/RSJ International Conference on Intelligent Robots and Systems, Vol. 1, pp. 312-317.
38.
Simaan, N., Taylor, R. and Flint, P. ( 2004). A dexterous system for laryngeal surgery. IEEE International Conference on Robotics and Automation, pp. 351-357.
39.
Sun, Y. and Nelson, B.J. ( 2002). Biological cell injection using an autonomous microrobotic system. The International Journal of Robotics Research, 21(10-11): 861- 868.
40.
Terayama, M., Furusho, J. and Monden, M. ( 2007). Curved multi-tube device for path-error correction in a needle-insertion system. International Journal of Medical Robotics and Computer Assisted Surgery, 3(2): 125-134.
41.
Webster, R.J., III ( 2007). Design and Mechanics of Continuum Robots for Surgery . Ph.D. Thesis, Mechanical Engineering, Johns Hopkins University , Baltimore, MD.
42.
Webster, R.J., III, and Jones, B.A. ( 2010). Design and modeling of constant curvature continuum robots: A review. The International Journal of Robotics Research (accepted).
43.
Webster, R.J., III, Kim, J.S., Cowan, N.J., Chirikjian, G.S. and Okamura, A.M. ( 2006a). Nonholonomic modeling of needle steering. The International Journal of Robotics Research, 25(5/6): 509-526.
44.
Webster, R.J., III, Okamura, A.M. and Cowan, N.J. ( 2006b). Toward active cannulas: miniature snake-like surgical robots. IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2857-2863.
45.
Webster, R.J., III, Romano, J.M. and Cowan, N.J. ( 2008). Kinematics and calibration of active cannulas . IEEE International Conference on Robotics and Automation, pp. 3888-3895.
46.
Webster, R.J., III, Romano, J.M. and Cowan, N.J. ( 2009). Mechanics of precurved-tube continuum robots. IEEE Transactions on Robotics, 25(1): 67-78.
