Planning and control for cooperative manipulation and transportation with aerial robots

Abstract

We consider the planning and control of multiple aerial robots manipulating and transporting a payload in three dimensions via cables. Individual robot control laws and motion plans enable the control of the payload (position and orientation) along a desired trajectory. We address the fact that robot configurations may admit multiple payload equilibrium solutions by developing constraints for the robot configuration that guarantee the existence of a unique payload pose. Further, we formulate individual robot control laws that enforce these constraints and enable the design of non-trivial payload motion plans. Finally, we propose two quality measures for motion plan design that minimize individual robot motion and maximize payload stability along the trajectory. The methods proposed in the work are evaluated through simulation and experimentation with a team of three quadrotors.

Keywords

Aerial robotics manipulation planning kinematics under-actuated control

Get full access to this article

View all access options for this article.

References

Anitescu, M. ( 2003). A fixed time-step approach for multi-body dynamics with contact and friction. Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, Coimbra, Portugal, pp. 3725-3731.

Anitescu, M. and Potra, F.A. ( 1997). Formulating dynamic multi-rigid-body contact problems with friction as solvable linear complementarity problems. Nonlinear Dynamics, 14: 231-247.

Cottle, R.W. , Pang, J. and Stone, R.E. ( 1992). The Linear Complementarity Problem. New York, Academic Press.

D. Stewart , J.T. (2000). An implicit time-stepping scheme for rigid body dynamics with coulomb friction . Proceedings of the IEEE International Conference on Robotics and Automation, San Francisco, CA, pp. 162-169.

Fischer, K. , Gartner, B. , Schonherr, S. and Wessendorp, F. ( 2007). Linear and quadratic programming solver. CGAL User and Reference Manual, Board, C. E. (ed.).

Hunt, K. ( 1978). Kinematic Geometry of Mechanisms. Oxford, Oxford University Press.

Jiang, Q. , & Kumar, V. 2010a (Aug.). The Direct Kinematics of Objects Suspended from Cables. In: ASME IDETC/CIE Mechanisms and Robotics Conference.

Jiang, Q. , & Kumar, V. 2010b. The Inverse Kinematics of 3-D Towing. Pages 321 - 328 of: Lenarcic, J. , & Stanisic, M.M. (eds), Advances in Robot Kinematics. Springer.

Lobo, M.S. , Vandenberghe, L. , Boyd, S. and Lebret, H. ( 1998). Application of second-order cone programming. Linear Algebra and Its Applications, 284: 192-228.

10.

Michael, N. , Fink, J. and Kumar, V. ( 2009a). Cooperative manipulation and transportation with aerial robots. Proceedings of Robotics: Science and Systems, Seattle, WA.

11.

Michael, N. , Fink, J. and Kumar, V. ( 2010). Cooperative manipulation and transportation with aerial robots. Autonomous Robots (submitted).

12.

Michael, N. , Kim, S. , Fink, J. and Kumar, V. ( 2009b). Kinematics and statics of cooperative multi-robot aerial manipulation with cables. ASME International Design Engineering Technical Conference and Computers and Information in Engineering Conference, San Diego, CA.

13.

Murray, R.M. ( 1996). Trajectory generation for a towed cable system using differential flatness. IFAC World Congress, San Francisco, CA.

14.

Phillips, J. ( 1990). Freedom in Machinery, Vol. 1. Cambridge, Cambridge University Press.

15.

Selig, J.M. ( 2005). Geometric Fundamentals of Robotics. New York, Springer.

16.

Stewart, D. ( 2006). Convolution complementarity problems with application to impact problems. IMA Journal of Applied Mathematics, 71: 92-119.