Design and manufacturing of a controllable miniature flapping wing robotic platform

Abstract

In this work we present the design of a scalable, controllable, miniature flapping wing robot. The design effort comprises considerations of the number of driving actuators for controllability, body structure for both weight minimization and rigidity, and overall compactness of the robot design. This results in the development of the spherical four-bar transmission mechanism, with a single-wing prototype experimentally characterized. A dual-wing robot design manufactured via the smart composite microstructures technique is presented, featuring independent wing actuation. Finite-element analysis of the final airframe design is presented, ensuring vibration modes out of the operation range of the platform and high rigidity. A working prototype is manufactured and experiments are conducted characterizing the robot’s lift production capabilities and ensuring minimal wing coupling. A scaling law of the proposed design is presented based on momentum theory, predicting an increase of the lift/weight ratio with decreasing size. An optimization methodology for the parameters of a scaled down prototype is presented, based on a developed theoretical simulation and design tool. Finally, a 1/2 scaled down prototype using the optimized parameters is built and tested, featuring a lift/weight ratio of 3/8.

Keywords

Flapping wing flight miniature aerial robots bio-inspired robots scaling analysis design optimization

Get full access to this article

View all access options for this article.

References

Arabagi

Hines

Sitti

(2011) A simulation and design tool for a passive rotation flapping wing mechanism. IEEE/ASME Trans. on Mechatronics, in press.

Avadhanula

(2005) The Design and Fabrication of the MFI Thorax Based on Optimal Dynamics. PhD thesis, University of California, Berkeley.

Avadhanula

Fearing

(2005) Flexure design rules for carbon fiber microrobotic mechanisms. In Proceedings of International Conference on Robotics and Automation, pp. 1579–1584.

Bergou

Wang

(2007) Passive wing pitch reversal in insect flight. Journal of Fluid Mechanics 591: 321–337.

Birch

Dickinson

(2003) The influence of wing–wake interactions on the production of aerodynamic forces in flapping flight. Journal of Experimental Biology 206: 2267–2272.

Dickinson

Lehman

Sane

(1999) Wing rotation and the aerodynamic basis of insect flight. Science 284: 1954–1600.

Ellington

(1984a) The aerodynamics of hovering insect flight. II. Morphological parameters. Philosophical Transactions of the Royal Society of London 305: 17–40.

Ellington

(1984b) The aerodynamics of hovering insect flight. III. Kinematics. Philosophical Transactions of the Royal Society of London 305: 41–78.

Ellington

(1984c) The aerodynamics of hovering insect flight. VI. Lift and power requirements. Philosophical Transactions of the Royal Society of London 305: 145–181.

10.

Ellington

(1999) The novel aerodynamics of insect flight: Applications to micro-air vehicles. Journal of Experimental Biology 202: 3439–3448.

11.

Finio

Wood

(2010) Distributed power and control actuation in the thoracic mechanics of a robotic insect. Bioinspiration and Biomimetics: 045006.

12.

Fry

Sayaman

Dickinson

(2005) The aerodynamics of hovering flight in drosophila. Journal of Experimental Biology 208: 2303–2318.

13.

Hedrick

Daniel

(2006) Flight control in the hawkmoth Manduca sexta: the inverse problem of hovering. Journal of Experimental Biology 209: 3114–3130.

14.

Henderson

Taimina

(2005) Experiencing Geometry: Euclidean and Non-Euclidean with History. New York: Pearson/Prentice Hall.

15.

Hines

Arabagi

Sitti

(2011) Free flight simulations and pitch and roll control experiments of a sub gram flapping flight micro aerial vehicle. In Proceedings of the IEEE International Conference on Robotics and Automation, pp. 1–7.

16.

Hooker

(1998) Properties of PZT-based Piezoelectric Ceramics between 150 and 250 deg C. Technical Report, National Aeronautics and Space Administration.

17.

Muijres

Johansson

Barfield

Wolf

Spedding

Hedenstrom

(2008) Leading-edge vortex improves lift in slow-flying bats. Science 319: 1250–1253.

18.

Reuleaux

Kennedy

(1876) Kinematics of Machinery: Outlines of a Theory of Machines. London: Macmillan and Co., p. 75.

19.

Sane

Dickinson

(2002) The aerodynamic effects of wing rotation and a revised quasi-steady model of flapping flight. Journal of Experimental Biology 205: 1087–1096.

20.

Srygley

Thomas

ALR

(2002) Unconventional lift-generating mechanism in free-flying butterflies. Nature 420: 660–664.

21.

Steltz

(2008) Redesign of the Micromechanical Flying Insect in a Power Density Context. PhD thesis, University of California, Berkeley.

22.

Steltz

Fearing

(2007) Dynamometer power output measurements of piezoelectric actuators. In IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3980–3986.

23.

Wood

(2008) The first takeoff of a biologically inspired at-scale robotic insect. IEEE Transactions on Robotics 24: 341–347.

24.

Wood

Avadhanula

Menon

Fearing

(2003) Microrobotics using composite materials: The micromechanical flying insect thorax. In Proceedings of the IEEE International Conference on Robotics and Automation, pp. 1842–1849.

25.

Wood

Steltz

Fearing

(2005) Optimal energy density piezoelectric bending actuators. Sensors and Actuators A 119: 476–488.

26.

Zhao

Huang

Deng

Sane

(2009) Aerodynamic effects of flexibility in flapping wings. Interface 7: 485–497.