Empirical characterization of modular variable stiffness inflatable structures for supernumerary grasp-assist devices

Abstract

This paper presents the design, fabrication, and experimental characterization of modular, variable stiffness inflatable components for pneumatically actuated supernumerary robotic (SR) grasp-assist devices. The proposed SR grasp-assist devices are comprised of soft rigidizable finger phalanges and variable stiffness pneumatic bending actuators that are manufactured using soft lithography fabrication methods. The mechanical and kinematic properties of these modular, inflatable components are characterized experimentally under various loading conditions and over a range of geometric design parameters. The resulting data-driven properties are then used to predict the grasp strengths and motion patterns of SR grasp-assist device configurations designed to accommodate the manipulation of daily living objects. Experimental results demonstrate the ability to program grasp synergies into SR fingers by strategic inflation of the bending actuator antagonist chambers (varying mechanical stiffness), without the need for complicated, high-power mechanisms or precise, low-level motion control. The results also demonstrate the underactuated grasp adaptations enabled by modular inflatable components and the ability to predict mechanical grasping capabilities of wearable pneumatic SR grasp-assist devices using insights from empirical data.

Keywords

Human performance augmentation underactuated robots mechanism design grasping multifingered hands rehabilitation robots

Get full access to this article

View all access options for this article.

References

Alexander

Viktor

(2010) Proportions of hand segments. International Journal of Morphology 28(3): 755–758.

Arata

Ohmoto

Gassert

et al . (2013) A new hand exoskeleton device for rehabilitation using a three-layered sliding spring mechanism. In: Lynne

(ed.) IEEE international conference on robotics and automation (ICRA), Karlsruhe, Germany, 6–10 May 2013, pp.3902–3907. IEEE.

Balasubramanian

Klein

Burdet

(2010) Robot-assisted rehabilitation of hand function. Current Opinion in Neurology 23(6): 661–670.

Bishop-Moser

Krishnan

Kim

et al . (2012) Design of soft robotic actuators using fluid-filled fiber-reinforced elastomeric enclosures in parallel combinations. In: Nancy

(ed.) IEEE/RSJ international conference on intelligent robots and systems, Vilamoura, Portugal, 7–12 October 2012, pp.4264–4269. IEEE.

Brown

Rodenberg

Amend

et al . (2010) Universal robotic gripper based on the jamming of granular material. Proceedings of the National Academy of Sciences 107(44): 18809–18814.

Canela

del Ama

Pons

(2013) Design of a pediatric exoskeleton for the rehabilitation of the physical disabilities caused by cerebral palsy. In: Pons

Torricelli

Pajaro

(eds) Converging Clinical and Engineering Research on Neurorehabilitation. Berlin, Heidelberg: Springer, pp.255–258.

Cempini

Cortese

Vitiello

(2015) A powered finger–thumb wearable hand exoskeleton with self-aligning joint axes. IEEE/ASME Transactions on Mechatronics 20(2): 705–716.

Connelly

Jia

Toro

et al . (2010) A pneumatic glove and immersive virtual reality environment for hand rehabilitative training after stroke. IEEE Transactions on Neural Systems and Rehabilitation Engineering 18(5): 551–559.

Deimel

Brock

(2013) A compliant hand based on a novel pneumatic actuator. In: Lynne

(ed.) IEEE international conference on robotics and automation (ICRA), Karlsruhe, Germany, 6–10 May 2013, pp.2047–2053. IEEE.

10.

Dollar

Howe

(2010) The highly adaptive SDM hand: Design and performance evaluation. The International Journal of Robotics Research 29(5): 585–597.

11.

Galloway

Polygerinos

Walsh

et al . (2013) Mechanically programmable bend radius for fiber-reinforced soft actuators. In: 16th international conference on advanced robotics (ICAR), Montevideo, Uruguay, 25–29 November 2013, pp.1–6.

12.

Graf

(2008) The Lawton instrumental activities of daily living scale. The American Journal of Nursing 108(4): 52–62.

13.

Hammond

Asada

(2015) Variable stiffness pneumatic structures for wearable supernumerary robotic devices. In: International symposium on robotics research, Sestri Levante, Italy, 12–15 September 2015. Springer International Publishing AG.

14.

Heo

Lee

et al . (2012) Current hand exoskeleton technologies for rehabilitation and assistive engineering. International Journal of Precision Engineering and Manufacturing 13(5): 807–824.

15.

Hussain

Salvietti

Spagnoletti

et al . (2016) The soft-sixthfinger: A wearable EMG controlled robotic extra-finger for grasp compensation in chronic stroke patients. IEEE Robotics and Automatic Letters 1(2): 1000–1006.

16.

Ilievski

Mazzeo

Shepherd

et al . (2011), Soft robotics for chemists. Angewandte Chemie 123: 1930–1935.

17.

Katz

(1983) Assessing self-maintenance: activities of daily living, mobility, and instrumental activities of daily living. Journal of the American Geriatrics Society 31(12): 721–727.

18.

Koeneman

Schultz

Wolf

et al . (2004) A pneumatic muscle hand therapy device. In: 26th annual international conference of the IEEE engineering in medicine and biology society (IEMBS’04), San Francisco, CA, USA, 1–5 September 2004, Vol. 1, pp. 2711–2713. IEEE.

19.

Krebs

Hogan

Aisen

et al . (1998) Robot-aided neurorehabilitation. IEEE Transactions on Rehabilitation Engineering 6(1): 75–87.

20.

Kutner

Zhang

Butler

et al . (2010) Quality-of-life change associated with robotic-assisted therapy to improve hand motor function in patients with subacute stroke: a randomized clinical trial. Physical Therapy 90(4): 493–504.

21.

Kwakkel

Kollen

Krebs

(2007) Effects of robot-assisted therapy on upper limb recovery after stroke: A systematic review. Neurorehabilitation and Neural Repair 22(2): 111–121.

22.

Llorens-Bonilla

Parietti

Asada

(2012) Demonstration-based control of supernumerary robotic limbs. In: Nancy

(ed.) IEEE/RSJ international conference on intelligent robots and systems, Vilamoura, Portugal, 7–12 October 2012, pp.3936–3942. IEEE.

23.

Matheus

Dollar

(2010) Benchmarking grasping and manipulation: Properties of the objects of daily living. In: IEEE/RSJ international conference on intelligent robots and systems (IROS), Paipei, Taiwan, 18–22 October 2010, pp.5020–5027. IEEE.

24.

McNeil

(1993) Americans with disabilities, 1991-92: Data from the Survey of Income and Program Participation (No. 33). US Department of Commerce, Economics and Statistics Administration, Bureau of the Census.

25.

Odhner

Jentoft

Claffee

et al . (2014) A compliant, underactuated hand for robust manipulation. International Journal of Robotics Research 33(5): 736–752.

26.

Park

Chen

Young

et al . (2014) Design and control of a bio-inspired soft wearable robotic device for ankle-foot rehabilitation. Bioinspiration & Biomimetics 9(1): 016007.

27.

Parietti

Chan

Asada

(2014) Bracing the human body with supernumerary robotic limbs for physical assistance and load reduction. In: 2014 IEEE international conference on robotics and automation (ICRA), Hong Kong, China, 18–22 October 2010, pp.141–148. IEEE

28.

Polygerinos

Lyne

Wang

et al . (2013) Towards a soft pneumatic glove for hand rehabilitation. In: 2013 IEEE/RSJ international conference on intelligent robots and systems, Tokyo, Japan, 3–7 November 2013, pp.1512–1517. IEEE.

29.

Pons

(2010) Rehabilitation exoskeletal robotics. IEEE Engineering in Medicine and Biology Magazine 29(3): 57–63.

30.

Salvietti

Hussain

Cioncoloni

et al . (2017) Compensating hand function in chronic stroke patients through the robotic sixth finger. IEEE Transactions on Neural Systems and Rehabilitation Engineering 25(2): 142–150.

31.

Sasaki

Noritsugu

(2009) Development of wearable master-slave training device constructed with pneumatic rubber muscles. In: the 18th IEEE international symposium on robot and human interactive communication (RO-MAN 2009), September 2009, pp.91–96. IEEE.

32.

Shapiro

Wolf

Gabor

(2011) Bi-bellows: Pneumatic bending actuator. Sensors and Actuators A: Physical 167(2): 484–494.

33.

Spector

Katz

Murphy

et al . (1987) The hierarchical relationship between activities of daily living and instrumental activities of daily living. Journal of Chronic Diseases 40(6): 481–489.

34.

Suzumori

(1996) Elastic materials producing compliant robots. Robotics and Autonomous Systems 18(1): 135–140.

35.

Takahashi

Der-Yeghiaian

et al . (2008) Robot-based hand motor therapy after stroke. Brain 131(2): 425–437.

36.

Wolf

Bahls

Chalon

et al . (2015) Soft robotics with variable stiffness actuators: Tough robots for soft human robot interaction. In: Soft Robotics. Berlin: Springer, pp.231–254.

37.

Asada

(2014) Bio-artificial synergies for grasp posture control of supernumerary robotic fingers. In: Robotics: Science and Systems X, 12–16 July 2014, University of California, Berkeley, CA, USA: MIT Press.

38.

Xing

Huang

et al . (2009) Design of a wearable rehabilitation robotic hand actuated by pneumatic artificial muscles. In: 7th Asian control conference (ASCC 2009), Hong Kong, China, 27–29 August 2009, pp.740–744. IEEE.