Comparative Investigations of the Influence of the Type of Catalytic System and the Polymerisation Conditions of Isotactic Polypropylene on the Yield and Properties of Atactic Polypropylene
Restricted accessResearch articleFirst published online February, 2015
Comparative Investigations of the Influence of the Type of Catalytic System and the Polymerisation Conditions of Isotactic Polypropylene on the Yield and Properties of Atactic Polypropylene
A comparative investigation was made of the influence of the type of catalytic system and the polymerisation conditions of isotactic polypropylene on the yield and properties of atactic polypropylene.
Get full access to this article
View all access options for this article.
References
1.
AntsiburovK.A.The production of a stereospecific catalyst for the polymerisation of propylene. Plast. Massy, (7): 63–64 (1988).
2.
BukatovG.D.The polymerisation of propylene over titanium–magnesium catalysts. Papers of the 1st International Russian–Kazakhstan Conference on Chemistry and Chemical Technology, Tomsk Polytechnic University, Tomsk, pp. 668–671 (2011).
3.
DenisovE.T.The Kinetics of Homogeneous Chemical Reactions.Khimiya, Moscow, 365 pp. (1978).
4.
MaierE.A.Implementation of the project 'Technical re-equipment of polypropylene production with the use of a titanium–magnesium catalyst and with an increase in the capacity of polypropylene production to 130 t/year. Papers of the 1st International Russian–Kazakhstan Conference on Chemistry and Chemical Technology, Tomsk Polytechnic University, Tomsk, pp. 660–663 (2011).
5.
NekhoroshevaA.V., and NekhoroshevV.P.Atactic Polypropylene and Non-crystalline Propylene Polymers: Production, Structure, Properties, and Application.Poligrafist, Khanty-Mansiisk, 150 pp. (2008).
ShabalinE. Yu.The development of initial data for modernisation of the production of polypropylene with a changeover to the use of modern titanium–magnesium catalysts. Izv. Tomsk. Politekh. Univ., 317(3): 181–185 (2010).
8.
ShabalinE. Yu.The development and state-of-the-art of technologies for the production of polypropylene. Papers of the 1st International Russian–Kazakhstan Conference on Chemistry and Chemical Technology, Tomsk Polytechnic University, Tomsk, pp. 657–660 (2011).
