A comparison of the effect of riveting and cold expansion on the strain distribution and fatigue performance of fiber metal laminates

Abstract

Fatigue tests carried out on three configurations (unexpanded, cold expanded and riveted) of fiber metal laminate material clearly demonstrated the beneficial effect of riveting compared to cold expansion in zero load transfer joints, for an approximately equivalent level of interference. Digital image correlation was used to measure the in-plane surface strain on cold expanded and riveted coupons during fatigue loading, and for the first time, digital image correlation was combined with pressure sensitive films to measure the strains resulting from the application of the rivet, including those under the rivet head. A comparison of the resultant strain field showed that the application of a rivet significantly reduces the stress concentration at the central hole and is effective in extending fatigue life. Some rivet heads were removed by milling, and the results from subsequent fatigue tests were used together with closed-form calculations to explain the findings of this study. It was concluded that the beneficial effect of riveting was less as a result of interference hole filling on the part of the rivet shank, but more a combination of the effect of interference and compression through the joint thickness.

Keywords

Composites fastening rivets pressure film digital image correlation

Get full access to this article

View all access options for this article.

References

De Rijck

Homan

Schijve

. The driven rivet head dimensions as an indication of the fatigue performance of aircraft lap joints. Int J Fatigue 2007; 29: 2208–2218.

Muller

. An experimental and analytical investigation on the fatigue behaviour of fuselage riveted lap joints. PhD Thesis, Delft University of Technology, Delft, The Netherlands, 1995.

Petrak

Stewart

. Retardation of cracks emanating from fastener holes. Eng Fract Mech 1974; 6: 275–282.

Fox

Withers

. Residual stresses in and around electromagnetically installed rivets measured using synchrotron and neutron diffraction. J Neutron Res 2007; 15(3–4): 215–223.

Fox

Withers

. Relaxation of residual stresses in and around mechanical fasteners due to fatigue loading. Mater Sci Forum 2006; 524–525: 153–158.

Schijve

. Fatigue of structures and materials. Dordrecht: Kluwer Academic Publishers, 2001.

Yanishevsky

Shi

. Fractographic examination of coupons representing aircraft structural joints with and without hole cold expansion. Eng Fail Anal 2013; 30: 74–90.

Kobayashi

. Handbook of experimental mechanics. New York: VCH Publishers, 1993, pp.1–1074.

Reddy

. Mechanics of laminated composite plates. Boca Raton, FL, USA: CRC Press, 1997.

10.

US Department of Defence. Military handbook: metallic materials and elements for aerospace vehicle structures. Wright-Patterson Air Force Base, OH, USA: US Department of Defence, 2008.

11.

Siebert

Becker

Spiltthof

. High speed DIC—error estimations and applications. Opt Eng 2007; 46(5): 051004-1–051004-7.

12.

Rans

Straznicky

. Avoiding knife-edge countersinks in GLARE through dimpling. Fatigue Fract Eng M 2005; 28: 633–640.

13.

Rans

Alderliesten

Straznicky

. Modelling of the rivet forming process in Aluminum and GLARE for design against fatigue. In: Proceedings of the 23rd symposium of the international committee on aeronautical fatigue, Hamburg, Germany, 27–29 May 2009, pp.1–17. Springer.

14.

Beaver

Mann

Sparrow

. Grid technique for the measurements of strains close to cold-expanded holes. Bournemouth: Measurement and Fatigue—Engineering Integrity Society, 1986, pp.491–505.

15.

Gloeckner

Kostrzewsky

. An overview of obtaining quantitative pressure distributions and loads from pressure sensitive films. Exp Techniques 2002; 26: 27–30.

16.

Liggins

Stranart

Finlay

. Calibration and manipulation of data from Fuji pressure-sensitive film. In: Little

(ed.) Experimental mechanics: technology transfer between high tech engineering and biomechanics. Elsevier: Amsterdam, 1992, pp.61–70.

17.

Muriuki

Gilbertson

Harner

. Characterization of the performance of a custom program for image processing of pressure sensitive film. J Biomech Eng: T ASME 2009; 131(014503): 1–4.

18.

Liggins

Finlay

. Image averaging in the analysis of data from pressure sensitive film. Exp Techniques 1997; 21(3): 19–22.

19.

Backman

Taremi

Marincak

. Experimental measurement of the pressure distribution in a simple rivetted lap joint for use in modelling fretting fatigue. In: 12th international conference on experimental mechanics (ICEM’12), Politecnico di Bari, Bari, Italy, 2004.

20.

Pilkey

. Peterson’s stress concentration factors. Hoboken, NJ, USA: John Wiley & Sons, 1974.

21.

Lanciotti

Polese

. The effect of interference-fit fasteners on the fatigue life of central hole specimens. Fatig Fract Eng Mater Struct 2005; 28: 587–597.

22.

Keshavanarayana

Smith

Gomez

. Fatigue based severity factors for shear loaded fastener joints. J Aircraft 2010; 47(1): 181–191.

23.

Frigaard

Grong

Midling

. A process model for friction stir welding of age hardening aluminum alloys. Metall Mater Trans A 2001; 32: 1189–1200.

24.

Backman

Patterson

Cowal

. Analysis of the effects of cold expansion of holes using thermoelasticity and image correlation. Fatig Fract Eng Mater Struct 2010; 33: 859–870.