A new version of the well-known Brazilian disk specimen weakened by a dumbbell-shaped slit with two key-shaped ends, called key-hole notched Brazilian disk specimen, made of polymethylmethacrylate, was utilized to measure experimentally the notch fracture toughness for key-hole notches of various radii and different lengths under pure mode I and pure mode II loading conditions. The experimental values of the mode II notch fracture toughness/mode I notch fracture toughness ratio were theoretically estimated by means of two brittle fracture criteria, namely, the maximum tangential stress and the mean stress criteria. Two groups of critical distances were used in the criteria. The first one was equal to that for sharp crack and the second one was directly determined from the mode I fracture tests. It was found that while both the criteria could estimate the experimental results satisfactorily, the agreement between the theoretical and the experimental results is excellent when one deals with larger notch lengths. Also found in the research was that choosing any of the critical distance groups did not affect the theoretical predictions significantly, meaning that the critical distances of sharp crack could be used in fracture prediction of key-hole notches.
BertoFLazzarinP. A review of the volume-based strain energy density approach applied to V-notches and welded structures. Theor Appl Fract Mec2009; 52: 183–194.
2.
BertoFLazzarinP. Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches. Mater Sci Eng R Rep2014; 75: 1–48.
3.
SewerynA. Brittle fracture criterion for structures with sharp notches. Eng Fract Mech1994; 47: 673–681.
4.
SewerynALukaszewiczA. Verification of brittle fracture criteria for elements with V-shaped notches. Eng Fract Mech2002; 69: 1487–1510.
5.
YosibashZPrielELeguillonD. A failure criterion for brittle elastic materials under mixed-mode loading. Int J Fracture2006; 141: 291–312.
6.
GomezFJElicesM. A fracture criterion for sharp V-notched samples. Int J Fracture2003; 123: 163–175.
7.
GomezFJElicesMValienteA. Cracking in PMMA containing U-shaped notches. Fatigue Fract Eng M2000; 23: 795–803.
8.
GomezFJElicesM. A fracture criterion for blunted V-notched samples. Int J Fracture2004; 127: 239–264.
9.
GomezFJElicesMBertoF. Local strain energy density to assess the static failure of U-notches in plates under mixed mode loading. Int J Fracture2007; 145: 29–45.
10.
GomezFJElicesMBertoF. Fracture of V-notched specimens under mixed mode (I+II) loading in brittle materials. Int J Fracture2009; 159: 121–135.
11.
AyatollahiMRTorabiAR. Brittle fracture in rounded-tip V-shaped notches. Mater Design2010; 31: 60–67.
PrielEBussibaAGiladI. Mixed mode failure criteria for brittle elastic V-notched structures. Int J Fracture2007; 144: 247–265.
14.
KullmerGRichardHA. Influence of the root radius of crack-like notches on the fracture load of brittle components. Arch Appl Mech2006; 76: 711–723.
15.
BertoFLazzarinPMarangonC. Brittle fracture of U-notched graphite plates under mixed mode loading. Mater Design2012; 41: 421–432.
16.
LazzarinPBertoFAyatollahiMR. Brittle failure of inclined key-hole notches in isostatic graphite under in-plane mixed mode loading. Fatigue Fract Eng M2013; 36(9): 942–955.
17.
BertoFLazzarinPAyatollahiMR. Brittle fracture of sharp and blunt V-notches in isostatic graphite under torsion loading. Carbon2012; 50(5): 1942–1952.
18.
BertoFLazzarinPElicesM. Fracture behavior of notched round bars made of PMMA subjected to torsion at room temperature. Eng Fract Mech2012; 90: 143–160.
19.
BertoFCendonDALazzarinP. Fracture behavior of notched round bars made of PMMA subjected to torsion at −60 °C. Eng Fract Mech2013; 102: 271–287.
20.
SusmelLTaylorD. The theory of critical distances to predict static strength of notched brittle components subjected to mixed-mode loading. Eng Fract Mech2008; 75: 534–550.
21.
AwajiHSatoS. Combined mode fracture toughness measurement by the disc test. J Eng Mater: T ASME1978; 100: 172–175.
22.
AyatollahiMRAlihaMRM. On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials. Eng Fract Mech2008; 75: 4631–4641.
23.
ShettyDKRosenfieldARDuckworthWH. Mixed-mode fracture of ceramics in diametral compression. J Am Ceram Soc1986; 69(6): 437–443.
24.
AlihaMRMAyatollahiMR. Rock fracture toughness study using cracked chevron notched Brazilian disk specimen under pure modes I and II loading—a statistical approach. Theor Appl Fract Mec2014; 69: 17–25.
25.
AlihaMRMSistaniniaMSmithDJ. Geometry effects and statistical analysis of mode I fracture in guiting limestone. Int J Rock Mech Min2012; 51: 128–135.
26.
AlihaMRMAyatollahiMR. Geometry effects on fracture behaviour of polymethyl methacrylate. Mat Sci Eng A: Struct2010; 527(3): 526–530.
27.
AlihaMRM. Indirect tensile test assessments for rock materials using 3-D disc-type specimens. Arab J Geosci2014; 7: 4757–4766
28.
AyatollahiMRTorabiAR. Investigation of mixed mode brittle fracture in rounded-tip V-notched components. Eng Fract Mech2010; 77: 3087–3104.
29.
AyatollahiMRTorabiARAziziP. Experimental and theoretical assessment of brittle fracture in engineering components containing a sharp V-notch. Exp Mech2011; 51: 919–932.
30.
AyatollahiMRTorabiAR. Failure assessment of notched polycrystalline graphite under tensile-shear loading. Mat Sci Eng A: Struct2011; 528: 5685–5695.
31.
AyatollahiMRTorabiAR. Experimental verification of RV-MTS model for fracture in soda-lime glass weakened by a V-notch. J Mech Sci Technol2011; 25: 2529–2534.
32.
AyatollahiMRTorabiAR. Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen. Int J Solids Struct2010; 47: 454–465.
33.
TorabiARFakoorMPirhadiE. Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch. Eng Fract Mech2013; 111: 77–85.
34.
TorabiARFakoorMDarbaniMA. Pure shear fracture study in a brittle graphite material containing a U-notch. Int J Damage Mech2014; 23(6): 839–854.
35.
TorabiARFakoorMPirhadiE. Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading. Int J Solids Struct2014; 51: 1287–1298.
36.
TorabiARAmininejadSH. Brittle fracture in V-notches with end holes. Int J Damage Mech. Epub ahead of print 19June2014. DOI: 10.1177/1056789514538293.
37.
TorabiARAbedinasabSM. Fracture study on key-hole notches under tension: two brittle fracture criteria and notch fracture toughness measurement by the disk test. Exp Mech. Epub ahead of print 30September2014. DOI: 10.1007/s11340-014-9949-0.
38.
KullmerG. Elastic stress fields in the vicinity of a narrow notch with circular root. In: Proceedings of the 9th biennial European conference on fracture (ECF 9: reliability and structural integrity of advanced materials), vol. II, Varna, 21–25 September 1992, pp.905–910.
39.
ZappalortoMLazzarinP. In-plane and out-of-plane stress field solutions for V-notches with end holes. Int J Fracture2011; 168: 167–180.
40.
TorabiAR. Closed-form expressions of mode I apparent notch fracture toughness for key-hole notches. J Strain Anal Eng Design2014; 49(8): 583–591.
