The measurement of residual stress using the deep-hole drilling method relies on the evaluation of the distortion of a hole in a plate under the action of far-field direct and shear stresses. While closed-form solutions exist for the isotropic materials, in previous work for orthotropic materials, finite element analysis has been used to find the distortion. In this technical note, Lekhnitskii’s analysis is used to find closed-form solutions for the distortion of a circular hole in an orthotropic plate. The results are compared with those of finite element analysis for a range of material properties with excellent agreement.
LeggattRHSmithDJSmithSD. Development and experimental validation of the deep-hole method for residual stress measurements. J Strain Anal Eng1996; 31: 177–186.
2.
TimoshenkoSGoodierJN.Theory of elasticity. New York: McGraw-Hill, 1951.
3.
BatemanMGMillerOHPalmerTJ. Measurement of residual stress in thick composite laminates using the deep-hole method. Int J Mech Sci2005; 47: 1718–1739.
4.
LekhnitskiiSG.Anisotropic plates. New York: Gordon and Breach, 1968.
5.
MahmoudiAHHossainSTrumanCE. A new procedure to measure near yield residual stresses using the deep hole drilling technique. Exp Mech2009; 49: 595–604.
6.
SchajerGSYangL.Residual stress measurement in orthotropic materials using the hole drilling method. Exp Mech1994; 34: 324–333.
7.
ShokriehMMGhasemiKAR. Determination of calibration factors of the hole drilling method for orthotropic composites using an exact solution. J Compos Mater2007; 41: 2293–2311.
8.
PagliaroPZuccarelloB.Residual stress analysis of orthotropic materials by the through-hole drilling method. Exp Mech2007; 47: 217–236.
9.
BaldiA.Full field methods and residual stress analysis in orthotropic material. I: linear approach. Int J Solids Struct2007; 44: 8229–8243.
10.
BaldiA.Full field methods and residual stress analysis in orthotropic material. II: nonlinear approach, Int J Solids Struct2007; 44: 8244–8258.
11.
BaldiA.Residual stress analysis of orthotropic materials using integrated digital image correlation. Exp Mech2014; 54: 1279–1292.
12.
PisarevVSEleonskySIChernovAV.Residual stress determination in orthotropic composites by displacement measurements near through hole. Exp Mech2015; 55: 1225–1238.
13.
SmithCB.Effect of elliptic or circular holes on the stress distribution in plates of wood or plywood considered as orthotropic materials. Report, Report no. 1510, 1944. Madison, WI: Forest Products Laboratory, USDA.
