This work addresses the reconstruction of strain gradient fields at the wood growth ring scale from full-field deformation measurements provided by digital image correlation. Moreover, the spatial distribution of the earlywood and latewood radial modulus of elasticity is assessed. Meso-scale tensile tests are carried out on Pinus pinaster Ait. wooden specimens oriented in the radial–tangential plane under quasi-static loading conditions. A parametric analysis of the two-dimensional digital image correlation extrinsic and intrinsic setting parameters is performed, in a balance between spatial resolution and resolution. It is shown that the parametric module is an effective way to quantitatively support the choice of digital image correlation parameters in the presence of the high deformation gradient fields generated by the structure–property relationships at the scale of observation. Under the assumption of a uniaxial tensile stress state, the spatial distribution of the radial elastic modulus across the growth rings is obtained. It is observed that the ratio of the radial modulus of elasticity between latewood and earlywood tissues can vary significantly as a function of the digital image correlation parameters. It is pointed out, however, that a convergence value can be systematically established. Effectively, earlywood and latewood stress–strain curves are obtained and elastic properties are determined assuming the converged digital image correlation setting parameters.
WatanabeUFujitaMNorimotoM.Transverse Young’s moduli and cell shapes in coniferous early wood. Holzforschung2002; 56(1): 1–6.
2.
ThuvanderFJernkvistLGunnarsJ.Influence of repetitive stiffness variation on crack growth behaviour in wood. J Mater Sci2000; 35(24): 6259–6266.
3.
FarruggiaFPerréP.Microscopic tensile tests in the transverse plane of earlywood and latewood parts of spruce. Wood Sci Technol2000; 34(2): 65–82.
4.
DangDPittiRMToussaintEet al. Inverse identification of early- and latewood hydric properties using full-field measurements. Wood Mater Sci Eng2018; 13(1): 50–63.
5.
CramerSKretschmannDLakesRet al. Earlywood and latewood elastic properties in loblolly pine. Holzforschung2005; 59(5): 531–538.
6.
MachadoJCruzH.Within stem variation of maritime pine timber mechanical properties. Holz Roh Werkst2005; 63(2): 154–159.
7.
NairnJ.A numerical study of the transverse modulus of wood as a function of grain orientation and properties. Holzforschung2007; 61(4): 406–413.
8.
XavierJAvrilSPierronFet al. Variation of transverse and shear stiffness properties of wood in a tree. Compos Part A: Appl S2009; 40(12): 1953–1960.
9.
PereiraJLEXavierJMoraisJet al. Assessing wood quality by spatial variation of elastic properties within the stem: case study of Pinus pinaster in the transverse plane. Can J Forest Res2014; 44(2): 107–117.
10.
TsehayeABuchananAWalkerJ.Selecting trees for structural timber. Holz Roh Werkst2000; 58(3): 162–167.
11.
WagnerLBaderTAutyDet al. Key parameters controlling stiffness variability within trees: a multiscale experimental–numerical approach. Trees: Struct Funct2013; 27(1): 321–336.
12.
HolmbergSPerssonKPeterssonH.Nonlinear mechanical behaviour and analysis of wood and fibre materials. Comput Struct1999; 72(4–5): 459–480.
13.
SantosCde JesusAMoraisJet al. Quasi-static mechanical behaviour of a double-shear single dowel wood connection. Constr Build Mater2009; 23(1): 171–182.
SciammarellaCSciammarellaF.Experimental mechanics of solids. New York: John Wiley & Sons, 2012.
16.
RastogiPKHackE (eds). Optical methods for solid mechanics: a full-field approach. New York: John Wiley & Sons, 2012.
17.
GrédiacMHildF (eds). Full-field measurements and identification in solid mechanics. New York: John Wiley & Sons, 2012.
18.
SuttonMOrteuJJSchreierH.Image correlation for shape, motion and deformation measurements: basic concepts, theory and applications. New York: Springer, 2009.
19.
PanBQianKXieHet al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol2009; 20(6): 062001.
20.
XavierJOliveiraMMonteiroPet al. Direct evaluation of cohesive law in mode I of Pinus pinaster by digital image correlation. Exp Mech2014; 54(5): 829–840.
21.
CatalanottiGXavierJ.Measurement of the mode II intralaminar fracture toughness and R-curve of polymer composites using a modified Iosipescu specimen and the size effect law. Eng Fract Mech2015; 138: 202–214.
22.
KuhnPCatalanottiGXavierJet al. Fracture toughness and crack resistance curves for fiber compressive failure mode in polymer composites under high rate loading. Compos Struct2017; 182: 164–175.
23.
GrédiacMBlaysatBSurF.A critical comparison of some metrological parameters characterizing local digital image correlation and grid method. Exp Mech2017; 57(6): 871–903.
24.
XavierJAvrilSPierronFet al. Novel experimental approach for longitudinal-radial stiffness characterisation of clear wood by a single test. Holzforschung2007; 61(5): 573–581.
25.
XavierJBeliniUPierronFet al. Characterisation of the bending stiffness components of MDF panels from full-field slope measurements. Wood Sci Technol2013; 47(2): 423–441.
26.
RossiMPierronF.On the use of simulated experiments in designing tests for material characterization from full-field measurements. Int J Solids Struct2012; 49(3–4): 420–435.
27.
SuYZhangQGaoZet al. Fourier-based interpolation bias prediction in digital image correlation. Opt Express2015; 23(15): 19242–19260.
28.
WangBPanB.Subset-based local vs. finite element based global digital image correlation: a comparison study. Theor Appl Lett2016; 6(5): 200–208.
29.
HildFRouxS.Comparison of local and global approaches to digital image correlation. Exp Mech2012; 52(9): 1503–1519.
30.
RéthoréJHildFRouxS.Extended digital image correlation with crack shape optimization. Int J Numer Meth Eng2008; 73(2): 248–272.
31.
TriconnetKDerrienKHildFet al. Parameter choice for optimized digital image correlation. Opt Laser Eng2009; 47(6): 728–737.
32.
KibitkinVSolodushkinAPleshanovVet al. On a choice of input parameters for calculation the vector field and deformation with DIC. Measurement2017; 95: 266–272.
33.
PanBXieHWangZet al. Study on subset size selection in digital image correlation for speckle patterns. Opt Express2008; 16(10): 7037–7048.
34.
YaofengSPangJ.Study of optimal subset size in digital image correlation of speckle pattern images. Opt Laser Eng2007; 45(9): 967–974.
35.
RossiMLavaPPierronFet al. Effect of DIC spatial resolution, noise and interpolation error on identification results with the VFM. Strain2015; 51(3): 206–222.
36.
BadaloniMRossiMChiappiniGet al. Impact of experimental uncertainties on the identification of mechanical material properties using DIC. Exp Mech2015; 55: 1411–1426.
37.
JernkvistLThuvanderF.Experimental determination of stiffness variation across growth rings in Picea abies. Holzforschung2001; 55(3): 309–317.
38.
HussainFNairnJMuszynskiL.An experimental method for measurement of strain distribution between wood the flour particles and polymer matrix on micro-mechanical level. Mat Sci Eng A: Struct2011; 528(18): 6072–6078.
39.
Majano-MajanoAFernandez-CaboJHoheiselSet al. A test method for characterizing clear wood using a single specimen. Exp Mech2012; 52(8): 1079–1096.
40.
XavierJde JesusAMoraisJet al. Stereovision measurements on evaluating the modulus of elasticity of wood by compression tests parallel to the grain. Constr Build Mater2012; 26(1): 207–215.
41.
XavierJFernandesJRAFrazãoOet al. Measuring mode I cohesive law of wood bonded joints based on digital image correlation and fibre Bragg grating sensors. Compos Struct2015; 121: 83–89.
42.
XavierJMajano-MajanoAFernandez-CaboJ.On the identifiability of stiffness components of clear wood from a 3D off-axes prismatic specimen: angle orientation and friction effects. Eur J Wood Wood Prod2016; 74(3): 285–290.
43.
CrespoJAiraJVázquezCet al. Comparative analysis of the elastic constants measured via conventional, ultrasound, and 3-D digital image correlation methods in Eucalyptus globulus Labill. BioResources2017; 12(2): 3728–3743.
44.
ToussaintEFournelyEPittiRMet al. Studying the mechanical behavior of notched wood beams using full-field measurements. Eng Struct2016; 113: 277–286.
45.
ASTM D4442–16. Standard test methods for direct moisture content measurement of wood and wood-base materials. ASTM International, West Conshohocken, PA, 2016.
46.
ASTM D2395–17. Standard test methods for density and specific gravity (relative density) of wood and wood-based materials. ASTM International, West Conshohocken, PA, 2017.
47.
YoneyamaS.Basic principle of digital image correlation for in-plane displacement and strain measurement. Adv Compos Mater2016; 25(2): 105–123.
48.
BingPHui-minXBo-qinXet al. Performance of subpixel registration algorithms in digital image correlation. Meas Sci Technol2006; 17(6): 1615–1621.
49.
LavaPPaepegemWVCoppietersSet al. Impact of lens distortions on strain measurements obtained with 2D digital image correlation. Opt Laser Eng2013; 51(5): 576–584.
