The vector form intrinsic finite element (VFIFE) method is springing up as a new numerical method in strong non-linear structural analysis for its good convergence, but has been constricted in static or transient analysis. To overwhelm its disadvantages, a new damping model was proposed: the value of damping force is proportional to relative velocity instead of absolute velocity, which could avoid inaccuracy in high-speed dynamic analysis. The accuracy and efficiency of the proposed method proved under low speed; dynamic characteristics and vibration rules have been verified under high speed. Simulation results showed that the modified VFIFE method could obtain numerical solutions with good efficiency and accuracy. Based on this modified method, high-speed vibration rules of spiral bevel gear pair under different loads have been concluded. The proposed method also provides a new way to solve high-speed rotor system dynamic problems.
YavuzSDSaribayZBCigerogluE.Nonlinear dynamic analysis of a drivetrain composed of spur, helical and spiral bevel gears. Nonlinear Dyn2020; 100: 3145–3170.
2.
LiZWWenBRPengZK, et al. Dynamic modeling and analysis of wind turbine drivetrain considering the effects of non-torque loads. Appl Math Model2020; 83: 146–168.
3.
WangHWZhangTLiuG, et al. System-structure coupling dynamic analysis of planetary gears. Math Probl Eng2015; 2015: 10.
4.
HuSYFangZD.The analysis and modeling of the synthetical meshing stiffness of inner gearing considering the flexible inner ring gear. Shock Vibr. Epub ahead of print 23 April 2019. DOI: 10.1155/2019/2324546.
5.
ZhuHMChenWFZhuRP, et al. Modelling and dynamic analysis of the spiral bevel gear-shaft-bearing-gearbox coupling system. Math Probl Eng. Epub ahead of print 8 September 2019. DOI: 10.1155/2019/9065215.
6.
LiuCFangZDWangF.An improved model for dynamic analysis of a double-helical gear reduction unit by hybrid user-defined elements: experimental and numerical validation. Mech Mach Theory2018; 127: 96–111.
7.
LiuCFangZDLiuX, et al. Multibody dynamic analysis of a gear transmission system in electric vehicle using hybrid user-defined elements. Proc IMechE, Part K: J Multi-Body Dynamics2019; 233: 30–42.
8.
XuXYTaoYCLiaoCR, et al. Dynamic simulation of wind turbine planetary gear systems with gearbox body flexibility. Stroj Vestn J Mech Eng2016; 62: 678–684.
9.
ShiWParkYParkH, et al. Dynamic analysis of the wind turbine drivetrain considering shaft bending effect. J Mech Sci Technol2018; 32: 3065–3072.
10.
ChoSChoiJChoiJH, et al. Numerical estimation of dynamic transmission error of gear by using quasi-flexible-body modeling method. J Mech Sci Technol2015; 29: 2713–2719.
11.
NeubauerPBösJMelzT.Evaluation of the gear noise reduction potential of geometrically uneven inequidistant gears. J Sound Vibr2020; 473: 115234.
12.
ChenYC.Time-varying dynamic analysis for a helical gear pair system with three-dimensional motion due to bearing deformation. Adv Mech Eng2020; 12: 13.
13.
MengZShiGXWangFL.Vibration response and fault characteristics analysis of gear based on time-varying mesh stiffness. Mech Mach Theory2020; 148: 15.
14.
ChenWTChenSYHuZH, et al. Dynamic analysis of a bevel gear system equipped with finite length squeeze film dampers for passive vibration control. Mech Mach Theory2020; 147: 18.
15.
YinMHCuiYHMengXJ, et al. Dynamic analysis of double-helical gear system considering effect of oil film among meshing teeth. Adv Mech Eng2020; 12: 14.
16.
LiuXZYangYHZhangJ.Investigation on coupling effects between surface wear and dynamics in a spur gear system. Tribol Int2016; 101: 383–394.
17.
CaoWPuWWangJX.Tribo-dynamic model and fatigue life analysis of spiral bevel gears. Eur J Mech Solids2019; 74: 124–138.
18.
HuangfuYFZhaoZFMaH, et al. Effects of tooth modifications on the dynamic characteristics of thin-rimmed gears under surface wear. Mech Mach Theory2020; 150: 13.
19.
ChenZGZhouZWZhaiWM, et al. Improved analytical calculation model of spur gear mesh excitations with tooth profile deviations. Mech Mach Theory2020; 149: 17.
20.
LiuCZYinXSLiaoYH, et al. Hybrid dynamic modeling and analysis of the electric vehicle planetary gear system. Mech Mach Theory2020; 150: 25.
21.
LiST.Effects of centrifugal load on tooth contact stresses and bending stresses of thin-rimmed spur gears with inclined webs. Mech Mach Theory2013; 59: 34–47.
22.
GuilbertBVelexPCutuliP.Quasi-static and dynamic analyses of thin-webbed high-speed gears: centrifugal effect influence. Proc IMechE, Part C: J Mechanical Engineering Science2019; 233: 7282–7291.
23.
LinCYuYQHuYA.Analysis of composite motion law and force of high speed curve-face gear. J Adv Mech Des Syst Manuf2017; 11: 14.
24.
HouXYFangZDZhangXJ, et al. Static contact analysis of spiral bevel gear based on modified VFIFE (vector form intrinsic finite element) method. Appl Math Model2018; 60: 192–207.
25.
DuanYFWangSMYauJD.Vector form intrinsic finite element method for analysis of train-bridge interaction problems considering the coach-coupler effect. Int J Struct Stab Dyn2019; 19: 29.
26.
LiXMGuoXLGuoHY.Vector form intrinsic finite element method for nonlinear analysis of three-dimensional marine risers. Ocean Eng2018; 161: 257–267.
27.
DuanYFTaoJJZhangHM, et al. Real-time hybrid simulation based on vector form intrinsic finite element and field programmable gate array. Struct Control Health Monit2019; 26: 21.
28.
ChenJLYangRCZhaoY.Application of vector form intrinsic finite element on integrated simulation of wind turbine. Struct Des Tall Spec Build2017; 26: 11.
29.
HallquistJOGoudreauGLBensonDJ.Sliding interfaces with contact-impact in large-scale Lagrangian computations. Comput Methods Appl Mech Eng1985; 51: 107–137.
30.
PingWSNakamachiE.The inside-outside contact search algorithm for finite element analysis. Int J Numer Methods Eng1997; 40: 3665–3685.
31.
LitvinFLFuentesA.Gear geometry and applied theory. Cambridge, MA: Cambridge University Press, 2004.
32.
JinzhanSZongdeFXiangweiC.Design and analysis of spiral bevel gears with seventh-order function of transmission error. Chin J Aeronaut2013; 26: 1310–1316.
33.
LitvinFLFuentesAHayasakaK.Design, manufacture, stress analysis, and experimental tests of low-noise high endurance spiral bevel gears. Mech Mach Theory2006; 41: 83–118.
34.
ZhihengFChaoshengS.Effects of geometry design parameters on the static strength and dynamics for spiral bevel gear. Int J Rotating Mach. Epub ahead of print 31 July 2017. DOI: 10.1155/2017/6842938.
35.
CaoWPuWWangJ.Tribo-dynamic model and fatigue life analysis of spiral bevel gears. Eur J Mech A Solids2019; 74: 124–138.
36.
ZhuHChenWZhuR, et al. Modelling and dynamic analysis of the spiral bevel gear-shaft-bearing-gearbox coupling system. Math Probl Eng. Epub ahead of print 8 September 2019. DOI: 10.1155/2019/9065215.
