The shakedown limit for an infinite plate containing a circular hole and subject to oscillatory arbitrary remote loading is found, first by using Melan’s lower bound theorem, and secondly by using a finite element model. It is shown that in some cases the limit found from the Melan theorem using the solution for the residual state of stress for an over-pressurized hole provides the exact solution, specifically when the limiting factor is the reversal of the state of stress at a particular point, while in other cases the shakedown limit is rather higher.
BleichH. Über die bemessung statisch unbestimmter stahltragwerke unter berücksichtigung des elastisch-plastischen verhaltens des baustoffes. Bauingenieur1932; 19(20): 261–266.
2.
BleichFMelanE. Die gewöhnlichen und partiellen Differenzengleichungen der Baustatik. Vienna: Springer-Verlag, 2013.
3.
KoiterW. A new general theorem on shakedown of elastic-plastic structures. Proc Koninkl Ned Akad Wet B1956; 59: 24–34.
4.
KönigJA. Shakedown of elastic-plastic structures. Amsterdam: Elsevier, 2012.
5.
FuschiPPisanoAAWeichertD, et al. Direct methods for limit and shakedown analysis of structures. Cham: Springer, 2015.
6.
MelanE. Der spannungszustand eines mises-henckys chen kontinuums bei veraderlicher belastung. Sitzber Akad Wiss Wien Iia1938; 147: 73–87.
7.
PreissR. On the shakedown analysis of nozzles using elastoplastic FEAInt J Pressure Vessels and Piping1999; 76(7): 421–434.
