Abstract
The AASHTO LRFD Bridge Design Specifications defines Strength II limit state for agencies to consider the load combination by owner-specified special design vehicles, evaluation permit vehicles, or both. The configuration and characteristics of permit vehicles vary from state to state. In addition, the code calibration process performed in 1994 for the development of the live load factors was applied only to the Strength I limit state. In New Jersey, the design permit vehicle was not developed based on actual permit records or weigh-in-motion (WIM) data. Recently, with the development of permit-issuing management and WIM technology, there is a need to evaluate the effectiveness of design permit vehicles. This study aims to develop a live load model for the assessment of Strength II limit state for New Jersey Department of Transportation (NJDOT). Five years of permit vehicle records are provided by NJDOT for the development of the live load model. The distribution of Gross Vehicle Weight is best described as the Generalized Extreme Value distribution. Load effects are simulated for different span lengths. The mean and standard deviation (SD) of the 75-year maximum loads are predicted using different extrapolation approaches. The results show that NJDOT Design Permit Vehicle provides stable mean and SD of bias ratios at 75-year level. In comparison with the current AASHTO live load factor of 1.35, the averages of the bias ratios at the 75-year level are found to be 1.31, 1.23, and 1.16 for the positive moment, shear, and negative moment, respectively.
Get full access to this article
View all access options for this article.