Abstract
Weigh stations are necessary for safeguarding highway infrastructure by enforcing truck weight limits. However, mandating all trucks to stop at all weigh stations decreases travel time reliability. This decrease in travel time reliability adversely impacts the productivity of the trucking industry and to a lesser degree impacts personal travel reliability as well. This study, conducted at the Lumberton weigh station on Interstate 95 in North Carolina, quantifies the impact of weigh stations on truck travel time reliability. Truck travel times were observed over periods of weigh station operation and weigh station closure. Comparison of these two states sheds light on the variability in travel time caused by weigh station operation. Results show that when the weigh station is operational, truck travel time reliability degrades significantly. VISSIM microsimulation software was used to quantify the expected impact of weigh in motion (WIM) on truck travel time reliability assuming different scenarios of WIM truck bypass. The model results indicate that WIM technology does increase travel time reliability and provides benefits to both trucking companies and enforcement agencies. It was also found that increases in the proportion of WIM bypass result in increases in route travel time reliability. However, this simulation model improvement was not uniform, with the highest marginal improvement occurring in the 30%–40% WIM bypass range.
Get full access to this article
View all access options for this article.