Structural Evaluation of the Transverse Joint of a Concrete Pavement Considering the Degradation Process

Abstract

Effective maintenance of a concrete pavement requires precise evaluation of the load transfer efficiency (LTE) at the transverse joint, which is simply calculated from the falling weight deflectometer (FWD) deflections at the loaded and unloaded slabs. In this study, the FWD deflections were simulated with the randomly generated elastic moduli of the pavement layers using the three dimensional finite element method considering the degradation process at a joint, which was categorized into five stages, from completely sound, to having broken dowels and a void underneath the joint. A database of FWD deflections, layer elastic moduli and the associated stage was created from the simulation results. The layer moduli were identified from the measured FWD deflections at a joint by searching the closest calculated FWD deflections to those measured from the database. The results of the analysis not only provide the layer moduli, but also the degradation stage of the joint to help engineers determine the appropriate rehabilitation measures. The method was validated on a 16 year old concrete pavement, on which the FWD measurements were performed three times: just before opening to traffic, after 9 years and 16 years of service. The identified layer moduli were not changed after 16 years of service, and some joints degraded owing to dowel corrosion, broken dowels and the existence of voids underneath the joints. The developed method is able to show the entire picture of the state of the joints in a section and also provide information on which parts of a particular joint have deteriorated.

Get full access to this article

View all access options for this article.

References

Guide Book of Concrete Pavements . Japan Road Association, 2016, p. 291 (in Japanese).

Design Manual of Pavements . Japan Road Association, 2006, p. 195 (in Japanese).

Operation Manual of FWD and Portable FWD . Pavement Engineering Series No. 2, The Committee of Pavement Engineering, Japan Society of Civil Engineers (JSCE), 2002 (in Japanese).

Teller

L. W.

Southern

E. C.

A Study of the Structural Action of Several Types of Transverse and Longitudinal Joint Design. Public Roads, Vol. 17, No. 7, 1936, pp. 93–94.

Manual of Pavement Inspection . Road Bureau, Ministry of Land, Infrastructure, Transport and Tourism, 2017 (in Japanese).

Matsui

Maina

J. W.

Nishizawa

Structural Evaluation of Concrete Pavements Based on Static and Dynamic Backanalysis. Proc., 8th International Conference on Concrete Pavement Design and Rehabilitation, Colorado Springs, 2005, pp. 969–979.

Ames

W. H.

Concrete Pavement Design and Rehabilitation in California. Proc., 3rd International Conference on Concrete Pavement Design and Rehabilitation, Purdue University, West Lafayette, IN, 1985, pp. 253–265.

Iijima

Kubota

The Performance Survey of Experimental Concrete Pavement Sections of Yaita Bypass. Proceedings of Japan Society of Civil Engineers, Vol.V-4, No.366, 1986, pp. 65–74.

Morian

D. A.

Suthahar

Stoffels

Evaluation of Rigid Pavement Joint Seal Movement, Transportation Research Record: Journal of the Transportation Research Board, 1999. 1684: 25–34.

10.

Nishizawa

Koyanagawa

Takeuchi

Kimura

Study on Mechanical Behavior of Dowel Bar in Transverse Joint of Concrete Pavement. Proc., 7th International Conference on Concrete Pavement, Orlando, Fla., 2001, pp. 571–587.

11.

Nishizawa

Fukuda

Matsuno

A Refined Model of Doweled Joints for Concrete Pavement Using FEM Analysis. Proc., 4th International Conference on Concrete Pavement Design and Rehabilitation, Purdue University, West Lafayette, IN, 1989, pp. 735–745.

12.

Inoue

Matsui

Structural Analysis of Asphalt Pavements by FWD and Backcalculation of Elastic Layered Model. Proc., 3rd International Conference on Bearing Capacity of Roads and Airfields, Tronheim, Norway, Vol. 1, 1990, pp. 425–434.