Flow rate estimation of a centrifugal blood pump using the passively stabilized eccentric position of a magnetically levitated impeller

Abstract

Flow rate estimation for ventricular assist devices without additional flow sensors can improve the quality of life of patients. In this article, a novel flow estimation method using the passively stabilized displacement of a magnetically levitated impeller is developed to achieve sufficient accuracy and precision of flow estimation for ventricular assist devices in a simple manner. The magnetically levitated impeller used is axially suspended by a magnetic bearing in a centrifugal blood pump that has been developed by our group. The radial displacement of the impeller, which is restricted by passive stability, can be correlated with the flow rate because the radial hydraulic force on the impeller varies according to the flow rate. To obtain the correlation with various blood viscosities, the relationships between the radial displacements of the magnetically levitated impeller and the pressure head-flow rate characteristics of the pump were determined simultaneously using aqueous solutions of glycerol with a potential blood viscosity range. The measurement results showed that accurate steady flow rates could be estimated with a coefficient of determination of approximately 0.97 and mean absolute error of approximately 0.22 L/min without fluid viscosity measurements by using the relationships between the impeller displacement and the flow rate. Moreover, a precision of approximately 0.01 (L/min)/µm was obtained owing to a strong estimation indicator signal provided by the large displacement of the passively stabilized impeller; thus, the proposed estimation method can help ensure sufficient accuracy and precision for ventricular assist devices in a simple manner, even if the blood viscosity is unknown.

Keywords

Flow rate estimation magnetically levitated impeller centrifugal blood pump passive stabilization eccentric impeller position

Get full access to this article

View all access options for this article.

References

Bertram

. Measurement for implantable rotary blood pumps. Physiol Meas 2005; 26(4): R99–R117.

Miller

Pagani

Russell

et al . Use of a continuous-flow device in patients awaiting heart transplantation. N Engl J Med 2007; 357(9): 885–896.

Arakawa

Nishimura

Takewa

et al . Alternation of left ventricular load by a continuous-flow left ventricular assist device with a native heart load control system in a heart failure model. J Thorac Cardiovasc Surg 2014; 148: 698–704.

Granegger

Moscato

Casas

et al . Development of a pump flow estimator for rotary blood pumps to enhance monitoring of ventricular function. Artif Organs 2012; 36(8): 691–699.

Hijikata

Rao

Abe

et al . Sensorless viscosity measurement in a magnetically-levitated rotary blood pump. Artif Organs 2015; 39(7): 559–568.

Tsukiya

Akamatsu

Nishimura

et al . Use of motor current in flow rate measurement for the magnetically suspended centrifugal blood pump. Artif Organs 1997; 21(5): 396–401.

Wakisaka

Okuzono

Taenaka

et al . Noninvasive pump flow estimation of a centrifugal blood pump. Artif Organs 1997; 21(7): 651–654.

Tsukiya

Taenaka

Nishinaka

et al . Application of indirect flow rate measurement using motor driving signals to a centrifugal blood pump with an integrated motor. Artif Organs 2001; 25(9): 692–696.

AlOmari

Savkin

Karantonis

et al . Non-invasive estimation of pulsatile flow and differential pressure in an implantable rotary blood pump for heart failure patients. Physiol Meas 2009; 30(4): 371–386.

10.

Masuzawa

Kita

Okada

An ultradurable and compact rotary blood pump with a magnetically suspended impeller in the radial direction. Artif Organs 2001; 25(5): 395–399.

11.

Hoshi

Asama

Hara

et al . Detection of left ventricle function from a magnetically levitated impeller behavior. Artif Organs 2006; 30(5): 377–383.

12.

Asama

Shinshi

Hoshi

et al . Dynamic characteristics of a magnetically levitated impeller in a centrifugal blood pump. Artif Organs 2007; 31(4): 301–311.

13.

Pai

Shinshi

Shimokohbe

Sensorless measurement of pulsatile flow rate using a disturbance force observer in a magnetically levitated centrifugal blood pump during ventricular assistance. Flow Meas Instrum 2010; 21: 33–39.

14.

Bourque

Gernes

Loree

2nd et al . HeartMate III: pump design for a centrifugal LVAD with a magnetically levitated rotor. ASAIO J 2001; 47(4): 401–405.

15.

Zhang

Fraser

et al . Comparison and experimental validation of fluid dynamic numerical models for a clinical ventricular assist device. Artif Organs 2013; 37(4): 380–389.

16.

Malagutti

Karantonis

Cloherty

et al . Noninvasive average flow estimation for an implantable rotary blood pump: a new algorithm incorporating the role of blood viscosity. Artif Organs 2007; 31(1): 45–52.

17.

Boes

Ochsner

Amacher

et al . Control of the fluid viscosity in a mock circulation. Artif Organs 2018; 42(1): 68–77.

18.

Masuzawa

Magnetically suspended motor system applied to artificial hearts and blood pumps. J Systems Control Eng 2016; 231(5): 330–338.

19.

Stepanoff

JA.

Centrifugal and axial flow pumps: theory, design, & application. 2nd ed. New York: John Wiley and Sons, 1953

20.

Gulich

. Centrifugal Pumps. 2nd ed. New York: Springer, 2010.

21.

Shida

Masuzawa

Osa

et al . Effects of eccentric impeller position on radial passive stability in a magnetically levitated centrifugal blood pump with a double volute. Adv Biomed Eng 2018; 7: 63–71 (Erratum in: Adv Biomed Eng 2018; 7: 117).

22.

Slaughter

Naka

John

et al . Post-operative heparin may not be required for transitioning patients with a HeartMate II left ventricular assist system to long-term warfarin therapy. J Hear Lung Transp 2010; 29: 616–624.

23.

Heilmann

Geisen

Benk

et al . Heamolysis in patients with ventricular assist devices: major differences between systems. Eur J Cardio-Thoracic Surg 2009; 36: 580–584.

24.

Rand

Lacombe

Hunt

et al . Viscosity of normal human blood under normothermic and hypothermic conditions. J Appl Physiol 1964; 19: 117–122.

25.

Steinbrecher

Skoda

Schiling

et al . Numerical simulation of a self-stabilizing rotor of a centrifugal pump. In: Proceedings of the 4th ASME/JSME join fluids engineering conference FEDSM’03, Honolulu, HI, 6–10 July 2003, pp.71–78. New York: ASME.

26.

Nishida

Nakayama

Sakota

et al . Effect of impeller geometry on lift-off characteristics and rotational attitude in a monopivot centrifugal blood pump. Artif Organs 2016; 40(6): E89–E101.