Fracture Behavior of Notched Unidirectional Boron/Aluminum Metal Matrix Composite under Bending

Abstract

The fracture behavior of continuous fiber reinforced boron/aluminum composite under bending is analyzed based on the measured full-field high resolution moire fringe patterns at the notch tip region of composites' specimen under three point bending. The mechanism of interfacial fiber/matrix sliding and debonding in bending is found to be quite different from those reported earlier for the case of uniform tension. In case of bending, after some initial crack growth, excessive shear deformation in other regions (other than notch tip) of the specimen makes the presence of notch irrelevant.

Experimental results are compared with the results obtained from finite element analysis. J-integral values are evaluated using the displacements obtained experimentally and also by using finite element. It is realized that any numerical simulation should be based on elasto-plastic analysis and consider friction between fiber and matrix when excessive shear deformation occurs and sliding is initiated.

Keywords

MMCs fracture in bending unidirectional composites boron/aluminum composite fiber/matrix debonding J-integral

Get full access to this article

View all access options for this article.

References

1. Sun, C. T. And K. M. Prewo . 1997. "Fracture Toughness of Boron Aluminum Composites," J. Comp. Materials, 11:164-175.

2. Awerbuch, A. and H. T. Hahn . 1979. "Crack-Tip Damage and Fracture Toughness of Boron/Aluminum Composites," J. Comp. Materials, 13:82-107.

3. Zweben, C. 1974. "An Appropriate Method of Analysis for Notched Unidirectional Composites," Engineering Fracture Mechanics,6: 1-10.

4. Reedy Jr., E. D. 1980. "On the Specimen Dependence of Unidirectional Boron/Aluminum Fracture Toughness," J. Comp. Materials, 14:118-131.

5. Tsangarakis, N. , J. Nunes and J. M. Slepetz . 1988. "Fracture Toughness Testing of Metal Matrix Composites," Engineering Fracture Mechanics, 30:565-577.

6. Evans, A. G. 1989. "The New High-Toughness Ceramics," ASTM Twentieth Symposium, Fracture Mechanics Perspectives and Direction, ASTM STP 1020, pp. 267-291.

7. Evans, A. G. , M. Y. He and J. F. Hutchinson . 1989. "Interface Debonding and Fiber Cracking in Brittle Matrix Composite," J. Am. Ceram. Soc., 72(12):2300-2303.

8. Thoulers, M. D. , O. Sbaizero , L. S. Sigl and A. G. Evans . 1989. "Effect of Interface Mechanical Properties on Pullout in a Sic-Fiber-Reinforced Lithium Aluminum Silicate Glass-Ceramix," J. Am. Ceram. Soc., 72(4):525-532.

9. Post, D. 1987. "Moire Interferometry," Handbook on Experimental Mechanics, A. S. Kobayashi , Ed., Prentice Hall, New Jersey.

10.

10. Kanninen, M. F. , E. F. Rybicki and W. I. Griffith . 1977. "Preliminary Development of a Fundamental Analysis Model for Crack Growth in a Fiber Reinforced Composite Material," Composite Materials: Testing and Design, ASTM STP 617, pp. 53-69.

11.

11. Tirosh, J. 1973. "The Effect of Plasticity and Crack Blunting on the Stress Distribution in Orthotropic Composite Materials," J. Appl. Mech., 40:785-790.

12.

12. Valaire, B. T. , Y. W. Yong , J. Suhling , B. J. Jang and S. Q. Zhang . 1990. "Application to the J-integral to Mixed Mode Fracture Analysis of Orthotropic Composites," Engineering Fracture Mechanics,36:507-514.

13.

13. Bahei-El-Din, Y. A. , G. J. Dvorak and J. F. Wu , 1989. "Fracture of Fibrous Metal Matrix Composites II: Modeling and Numerical Analysis," Engineering Fracture Mechanics,34: 105-123.

14.

14. Rice, J. R. 1968. "A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks," J. Appl. Mech., 35:785-790.

15.

15. Kang, B. S.-J. , F.-K. Hsieh and J. Prucz . 1993. "Experimental Investigation of Interfacial Fiber/Matrix Fracture Behavior of Notched Boron/Aluminum Composite by Moire Interferometry," Proceedings of the SEM Spring Conference on Experimental Mechanics, Dearborn, Michigan, pp. 24-287.