Studies on Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite Laminates

Abstract

This paper discusses the response of seven layer plain and satin weave carbon fabric reinforced composites fabricated using low-cost Vacuum Assisted Resin Infusion Molding (VARIM) process under low-velocity impact loading. Both stitched and unstitched laminates were tested at energy levels ranging 5-50 J using an instrumented drop-weight machine. A 3-cord Kevlar thread was used to stitch the laminate in two orthogonal grid patterns each at a 6 mm pitch: one with 25.4 mm and the other with 12.7 mm grid. Damage due to impact loading was evaluated through ultrasonic nondestructive evaluation (NDE). Results of the study showed the effectiveness of stitching in containing the damage size with 12.7 mm grid stitch samples exhibiting the least damage. Further, satin weave fabric composites exhibit better impact resistance as compared to plain weave fabric composites.

Get full access to this article

View all access options for this article.

References

1. Abrate, S. (1991). ASME Applied Mechanics Review, 44(4): 155-190 .

2. Cantwell, W.J. and Morton, J. (1991). Composites, 22(5): 347-362 .

3. Cordell, T.M. and Sjoblom, P.O. (1986). In: Proceedings of American Society for Composites, Damage Tolerance of Composites, First Technical Conference, Oct. Dayton, Ohio, pp. 297-312 , Technomic Publishing Co. Inc., Pennsylvania, USA.

4. Harding, J. (1989). Science and Engineering of Composite Materials, 1: 41-68 .

5. Elber, W. (1983). Failure Mechanics in Low-Velocity Impacts on Thin Composite Plates, NASA Technical Paper 2152.

6. Wu, H.Y. and Springer, G.S. (1988). Journal of Composite Materials, 22: 518-532 .

7. Liu, S. and Chang, F.K. (1994). Journal of Composite Materials, 28(10): 940-977 .

8. Liu, S. (1993). Composite Structures, 25: 257-265 .

9. Guild, F.J., Hogg, P.J. and Prichard, J.C. (1993). Composites, 24(4): 333-339 .

10.

10. Hull, D. and Yi, B.S. (1993). Composite Structures, 23: 99-120 .

11.

11. Prichard, J.C. and Hogg, P.J. (1990). Composites, 21(6): 503-511 .

12.

12. Wyrick, D. and Adams, D. (1988). Journal of Composite Materials, 22(8): 749-765 .

13.

13. Hosur, M.V., Murthy, C.R.L. and Ramamurthy, T.S. (1999). Journal of Composites Technology and Research, 51-64 .

14.

14. Huang, S.L., Richey, R.J. and Deska, E.W. (1978). Paper Presented at ASME, Winter Annual Meeting, San Francisco, USA.

15.

15. Mignery, L.A., Sun, C.T. and Tan, T.M. (1985). ASTM STP 876, 371-385.

16.

16. Kang, T.J. and Lee, S.H. (1994). Journal of Composite Materials, 28(16): 1574-1587 .

17.

17. Dransfield, K., Baillie, C. and Mai, Y.M. (1994). Composites Science and Technology, 50: 305-317 .

18.

18. Mouritz, A.P. and Cox, B.N. (2000). Composites, Part A, 31: 1-27 .

19.

19. Mouritz, A.P., Leong, K.H. and Herszberg, I. (1997). Composites: Part A, 28: 979-991 .

20.

20. Dexter, H.B. (1996). Society for the Advancement of Materials and Process Engineering, pp. 404-416.

21.

21. Mai, Y.W. and Jain, L.K. (1995). Composites Science and Technology, 55(3): 241-253 .

22.

22. Shu, D.W. and Mai, Y.W. Composites Science and Technology, 49(2): 165-171 .

23.

23. Farley, G.L., Smith, B.T. and Maiden, J. (1992). Journal of Reinforced Plastics and Composites, 11(7): 787-810 .

24.

24. Liu, D. Journal of Reinforced Plastics and Composites, 9(1): 59-69 .

25.

25. Munjal, A.K. (1987). ASM International, pp. 53-56.

26.

26. Bersuch, L., Benson, R. and Owens, S. (1998). Society for the Advancement of Materials and Process Engineering, Materials and Process Affordability: Keys to the Future, 43(I): 56-65 .

27.

27. Dexter, H.B. and Maiden, J. (1988). NASA Publication, pp. 91-113.

28.

28. Schwartz, M.M. (1996). Composite Materials - Processing, Fabrication and Applications, Vol. II, Prentice-Hall Publishers .

29.

29. Wu, E. and Chang, L.C. (1998). Journal of Composite Materials, 32(8): 702-721 .

30.

30. Naik, N.K. and Chandra Sekher, Y. (1998). Journal of Reinforced Plastics and Composites, 17(14): 1222-1263 .

31.

31. Naik, N.K., Chandra Sekher, Y. and Meduri, S. (2000). Journal of Reinforced Plastics and Composites, 19(12): 912-954 .

32.

32. Naik, N.K., Chandra Sekher, Y. and Meduri, S. (2000). Journal of Reinforced Plastics and Composites, 19(13): 1031-1054 .

33.

33. Walsh, T.F., Lee, B.L. and Song, J.W. (1996). In: Proceedings for the American Society for Composites, Atlanta, GA, USA, pp. 979-988 .