Interlaminar Stress and Delamination Analysis of Internally-Tapered Composite Laminates

Abstract

In the present work, the interlaminar fracture behavior of internally-tapered composite laminates that have cracks in the drop-off region is investigated using J-integral and direct calculation methods. The influences of cracks at the resin layer–interleaf interface and at the interface between adjacent plies are studied. The composite laminate is modeled and analyzed using partial hybrid stress finite elements that are formulated based on the Hellinger–Reissner variational principle and the generalized plane deformation theory. In the formulation, only three interlaminar stress components that cause delamination at the interface are independently assumed in addition to displacement interpolation. Both the six-node triangular and eight-node quadrilateral hybrid finite elements (formulated and presented in a companion paper [He, K., Hoa, S.V. and Ganesan, R. “Stress Analysis of Tapered Composite Laminate Using Partial Hybrid Finite Elements”, J. Reinforced Plastics and Composities, 23:6, 2004.]) are used in the fracture analysis. A parametric study is conducted to determine the influences of geometric and material properties on the fracture behavior of the tapered laminate. Experimental work was carried out for the observation of fracture. The analysis results and the experimental observation are compared.

Get full access to this article

View all access options for this article.

References

1. He, K., Hoa, S.V. and Ganesan, R. (2004). Stress Analysis of Tapered Composite Laminate Using Partial Hybrid Finite Elements , J. Reinforced Plastics and Composites, 23(6): 589–599 .

2. Sun, C.T. and Jih, C.J. (1987). On Strain Energy Release Rates for Interfacial Cracks in Bi-material Media , Engineering Fracture Mechanics, 28(1): 13–20 .

3. He, K., Hoa, S.V. and Ganesan, R. (2000). The Study of Tapered Laminated Composite Structures: A Review , Composites Science and Technology, 60: 2643–2657 .

4. Hoa, S.V and Feng, W. (1998). Hybrid Finite Element Method for Stress Analysis of Laminated Composites, Kluwer Academic Publishers, Boston, London .

5. Lekhnitskii, S.G. (1963). Theory of Elasticity of an Anisotropic Elastic Body, Holden-Day, Inc., San Francisco .

6. Han, J. and Hoa, S.V. (1993). A Three-dimensional Multilayer Composite Finite Element for Stress Analysis of Composite Laminates , International Journal for Numerical Methods in Engineering, 36: 3903–3914 .

7. Rice, J.R. (1968). A Path Independent Integral and the Approximate Analysis of Strain Concentrations by Notches and Cracks , J. Appl. Mech., 35: 397–386 .

8. Yan, X., Du, S. and Wang, D. (1992). J-integral Criterion of Delamination Onset in Toughened Matrix Composite Laminates , Engineering Fracture Mechanics, 40(1): 67–74 .

9. Johnson, M.J. and Sridharan, S. (1999). Evaluation of Strain Energy Release Rates in Delaminated Laminates Under Compression , AIAA Journal, 37(8): 954–963 .

10.

10. Ozdil, F. and Carlsson, L.A. (1992). Finite Element Analysis of Interleaved DCB Specimen , Engineering Fracture Mechanics, 41(4): 475–485 .

11.

11. Vizzini, A.J. and Lee, S.W. (1997). Damage Analysis of Composite Tapered Beams , Journal of the American Helicopter Society, 40(2): 43–49 .

12.

12. Kan He, (2002). Interlaminar Stresses and Fracture Behavior of Thickness-tapered Composite Laminates, Ph.D. Thesis, Concordia University, Montreal, Canada.