Design and Testing of a New Injection Approach for Liquid Composite Molding

Abstract

Resin Transfer Molding (RTM) is used to manufacture advanced fiber-reinforced composite parts. In this process, a fiber preform is placed into the mold cavity and sealed shut. Then, a liquid thermoset resin is injected into the mold through the injection gates and the gates are not closed until the resin arrives at the vent locations. One expects the resin to arrive last at the vents after having saturated the complete preform to obtain a successful part. However, the resin path to impregnate the preform is usually not repeatable due to the inherent nature of not being able to place the fiber preform exactly in the same location in the mold. A micron-size gap between the preform and the mold edge will introduce flow deviations and alter the flow pattern causing the resin to arrive prematurely at the vent locations. Thus, it is desirable to have multiple gate and vent locations, to aid in distributing the resin throughout the mold effectively and efficiently. In this paper, we present the design and validations of an automated RTM intelligent workstation. The workstation will have distributed injection gates and vents that will be triggered by the control methodology selected based on the on-line flow pattern of the resin during the impregnation process. Point sensors placed in the mold walls that will monitor the arrival of the resin will detect the on-line flow pattern. To automate and control the fluid flow during the RTM process it is also necessary to individually open or close various injection locations. A new method, which can deliver the resin to various locations within the mold, while still allowing any individual gate to be opened or closed at any time during the filling, was designed and tested. Development of such versatile injection scheme provides the potential to have better control on the distribution of the resin during impregnation and will lead to successful mold filling without any dry regions despite the presence of disturbances created by the quality and the placement of the perform.

Keywords

resin transfer molding advanced processing intelligent injection mold design

Get full access to this article

View all access options for this article.

References

1. Graf, Neil A. and Joyce, Peter J. (2001). Evaluation of Automated RTM Process and Materials for Naval Aircraft , International SAMPE Technical Conference, 33: 1133-1147 .

2. Tewfic, T. , Sarhadi, M. and Bahai, H. (2002). Investigations of an Automated Cell for Manufacturing Aerospace Composite Structures , International SAMPE Symposium and Exhibition (Proceedings), 47II: 1742-1754 .

3. Gruber, M.B. , Lamontia, M.A. and Waibel, B.J. (2001). Automated Fabrication Processes for Large Composite Aerospace Structures: A Trade Study , International SAMPE Symposium and Exhibition (Proceedings), 46II: 1986-1997 .

4. Lawrence, J.M. and Advani, S.G. (2000). The Effect of Ply Drop-Off Regions On Flow Propagation and Processing Parameters During the Resin Transfer Molding Process , In: Proceedings of the 45th International SAMPE 2000 Symposium and Exhibition, p. 45 .

5. Dutta, A. and Jayaraman, K. (1997). Resin Transfer Molding of Ribbed Composite Panels, Materials , Annual Technical Conference - ANTEC, Conference Proceedings, 2: 2459-2462 .

6. Devillard, M. , Laut, A. and Advani, S.G. On-Line Mixing During Injection and Simultaneous Curing in Liquid Composite Molding Processes , Submitted to Polymer Composites (Submitted).

7. Comas, S. , Ziaee, S. and Advani, S.G. (August 2002). Spatially Homogneous Gelation in LCM Polymer Engineering and Science, 42: 8 .

8. Blanchard, P.J. and Rudd, C.D. (1996). Cyle Time Reduction in Resin Transfer Moulding by Phased Catalyst Injection , Composite Sci. Technol., 56(2): 123-133 .

9. Radius 2100 cc Electric RTM Injection Cylinder, Radius Engineering, Inc., 3474 S. 2300 East, Salt Lake City, Utah, USA

10.

10. Lawrence, Jeffrey M. , Hsiao, Kuang-Ting , Don, Roderic C. , Simacek, Pavel, Estrada , Gonzalo, Sozer, E. Murat, Stadtfeld, Hubert C. and Advani, Suresh G. (1 July 2002). An Approach to Couple Mold Design and On-line Control to Manufacture Complex Composite Parts by Resin Transfer Molding , Composites Part A: Applied Science and Manufacturing, 33(7): 981-990 .

11.

11. Bickerton, Simon , Stadtfeld, Hubert C. , Steiner, Karl V. and Advani, Suresh G. (2001). Design and Application of Actively Controlled Injection Schemes for Resin-transfer Molding , Composites Science and Technology, 61: 1625-1637 .

12.

12. Nielsen, D. and Pitchumani, R. (December 2001). Intelligent Model-based Control of Preform Permeation in Liquid Composite Molding Processes, with Online Optimization , Composites Part A: Applied Science and Manufacturing, 32(12): 1789-1803 .

13.

13. Gokce, Ali , Hsiao, Kuang-Ting and Advani, Suresh G. (2002). Branch and Bound Search to Optimize Injection Gate Locations in Liquid Composite Molding Processes , Composites Part A: Applied Science and Manufacturing, 33(9): 1263-1272 .

14.

14. Yoon, M.K. and Sun, J.Q. (2002). Adaptive Control of Flow Progression in Resin Transfer Molding , Journal of Materials Processing and Manufacturing Science, 10(3): 171-182 .

15.

15. Stoeckhert, Mennig G. (1998). Mold-Making Handbook, 2nd edn, Hanser Publisher, Cincinnati, Ohio, USA .

16.

16. www.mcmaster.com item # 6453K71

17.

17. TORR Technology Inc, Permanent Vacuum Bagging Systems for Manufacturing Composite Parts, Torrtech Catalog, 1999.

18.

18. Immelman, E. , Jahed N. and Sanderson, R.D. (1993). Curing kinetics of diallyl phthalate in the presence of dicumyl peroxide as catalyst. A comparison of different data analysis techniques , Thermochimica Acta, 17 February 1993, 214(2): 277-290 .

19.

19. Heider, D. , Hofmann C. and Gillespie, J.W. Jr. (May 21-25, 2000). Automation and Control of Large-Scale Composite Parts by VARTM Processing , In: Proceedings of the 45th International SAMPE Symposium/Exhibition, Bridging the Centuries with SAMPE’s Materials and Processes Technology, Long Beach, CA.

20.

20. Rice, B.P. , Han, K. and Lee, W.C. (1999). Intelligent Process Control for the Resin Infusion Process , In: Proceedings of On-line Sensing and Control for Liquid Molding of Composite Structures, Annapolis, Maryland.

21.

21. Higuerey, E.E. and Coulter, J.P. (1996). Real-time Embedded Electronic Sensing During Resin Transfer Molding , Journal of Materials Processing and Manufacturing Science, 4(3): 179-203 .