Determination of Energy Release Rate in Carbon Fiber-Thermoplastic Composites and Comparison of Crack Propagation in Amorphous and Crystalline Interface By Single Fiber Pullout Test

Abstract

The fracture toughness in the fiber-matrix composite by means of the single fiber pull-out test can be achievable, if it is possible to measure the compliance of partial debonded fiber, which necessitates a stable crack propagation and the determination of the corresponding crack length. A combination of high stiff test equipment and a simultaneous monitoring of the photo-elastic pattern of the embedded fibers with the help of polarization microscope enables to measure crack length and determination of G_c [Hampe, A and Marotzke, C. (1997). The Energy Release Rate of the Fiber/Polymer Matrix Interface: Measurement and Theoretical Analysis, J. Reinf. Plast. and Compo., 16: 341-352.]. This method is well-known for glass fiber-amorphous polymer composite. In this investigation, we tried to implement the same technique to C-fiber with amorphous and semi-crystalline polymer composites. The energy release rate (ERR) of the fiber-matrix interface was evaluated for the carbon fiber-reinforced in polycarbonate (PC) by interfacial crack propagation arising in the single fiber pullout test. Further, the crack propagation at the fiber-matrix interface with different matrix morphology was discussed with the use of photo-elastic pattern observed with the aid of polarization microscope.

Keywords

carbon fibers fracture toughness micromechanics thermoplastic polymers

Get full access to this article

View all access options for this article.

References

1. Hampe, A. and Marotzke, C. (1997). The Energy Release Rate of the Fiber/Polymer Matrix Interface: Measurement and Theoretical Analysis , J. Reinf. Plast. and Compo., 16: 341-352 .

2. Gao, Y.C. , Mai, Y.W. and Cotterell, B. (1988). Fracture of Fiber Reinforced Materials , J. Appl. Math. and Phys. (ZAMP)., 39: 550-558 .

3. Sigl, L.S. and Evans, A.G. (1989). Effect of Residual Stress and Frictional Sliding on Cracking and Pull-out in Brittle Matrix Composites , Mech. Mater., 8: 1-12 .

4. Hsueh, C.H. (1996). Crack-wake Interfacial Debonding Criteria for Fiber-reinforced Cermaic Composites , Acta Mater., 44: 2211-2216 .

5. Budiansky, D. , Evans, A.G. and Hutchinson, J.W. (1995). Fiber-matrix Debonding Effect on Cracking in Aligned Fiber Ceramic Composites , Int. J. Solid Structure, 32: 315-328 .

6. Beckert, W. and Lauke, B. (1997). Critical Discussion of the Single-Fiber Pull-out Test: Does it Measure Adhesion? , Compos. Sci. Tech., 57: 1689-1706 .

7. Hutchinson, J.W. and Jensen, Hm. (1990). Models of Fiber Debonding and Pullout in Brittle Composites with Friction , Mech. Mater., 9: 139-163 .

8. Marshal, D.B. (1992). Analysis of Fiber Debonding and Sliding Experiments in Brittle Matrix Composites , Acta Metall., 40: 427-441 .

9. Mumm, D.R. and Faber, K.T. (1995). Interfacial Debonding and Sling in Brittle-matrix Composites Measured Using an Improved Fiber Pull-out Technique , Acta Mater., 43: 1259-1270 .

10.

10. Hampe, A. , Kalinka, G. , Meretz, S. and Schulz, E. (1995). An Advanced Equipment for Single Fiber Pull-out Test Designed to Monitor the Fracture Process , Composites, 26: 40-46 .

11.

11. Meretz, S. , Meretz, S. , Linke, T. , Schulz, E. , Hampe, A. and Hentschel, M. (1992). Diameter Measurements of Small Fibers: Laser Diffraction and Scanning Electron Microscopy Technique Results do not Differ Systematically , J. Mat. Sci. Letters, 11: 1471-1472 .

12.

12. Marotzke, C. and Qiao, L. (1997). Interfacial Crack Propagation Arising in Single Fiber Pull-out Tests , Comp. Sci. Tech., 57: 887-897 .

13.

13. Bowden, P.B. and Young, R.J. (1974). Deformation Mechanisms in Crystalline Polymers , J. Mat. Sci., 9: 2034-2051 .

14.

14. Lin, L. and Argon, As. (1994). Structure and Plastic Deformation of Polyethylene , J. Mat. Sci., 29: 294-323 .

15.

15. Chen, M.X. , Zheng, Q.S. and Yang, W. (1996). A Micromechanical Model of Texture Induced Orthotropy in Planar Crystalline Polymers , J. Mech. Phys. Solids, 44: 157-178 .

16.

16. Yang, W. , Gao, T.F. and Fu, Z.L. (1993). Crack Tip Superblunting Experiment, Theory and Numerical Simulation , Acta Mechanica. Sinica, 9: 131-141

17.

17. Chen, M.X. , Yang, W. and Zheng, Q.S. (1998). Simulation of Crack Tip Superblunting in Semi-crystalline Polymers , J. Mech. Phys. Solids, 46: 337-356 .

18.

18. Hsueh, C.H. (1990). Interfacial Debonding and Fiber Pull-out Stresses of Fiber Reinforced Composites , Mat. Sci. Eng., A123: 1-11 .