An Elastic-Plastic Stress Analysis of a Woven Reinforced Steel Fiber Thermoplastic Composite Cantilever Beam Subjected to Transverse Uniform Loads on the Upper Surface

In this study, an elastic-plastic stress analysis is carried out for a thermoplastic cantilever beam. This composite beam consists of woven Cr-Ni steel fibers and a low-density homogeneous polyethylene matrix, and is loaded uniformly. The Tsai-Hill yield theory is used for an analytical solution. The expansion of the plastic region and the residual stress component of x are determined for 0, 15, 30, 45, 60, and 90 orientation angles. The 45 orientation angle, which gives symmetrical values, represents the mean reinforcement angle because of the reinforcement type. The plastic region starts at the upper surface of the beam for 30 orientation angle. The intensity of the residual stress component of x is maximum at the upper and lower surfaces of the beam.