Machining of Fiber-reinforced Thermoplastics: Influence of Feed and Drill Size on Thrust Force and Torque during Drilling

Abstract

Polymer-based composite materials possess superior properties such as high strength-to-weight ratio, stiffness-to-weight ratio, and good corrosive resistance and therefore, are preferred for high-performance applications such as in the aerospace, defense, and sport goods industries. Drilling is one of the indispensable methods for building products with composite panels. Drilling tests have been conducted on glass fiber-reinforced plastic composite GFRP laminates using an instrumented CNC milling center. Machining parameters such as drill size, feed rate, and cutting speed have been observed for damage-free drilling of GFRP materials. A series of drilling experiments have been conducted on glass fiber-reinforced polyester laminates and the responses experienced such as thrust force and torque as functions of feed rate and drill size have been characterized to develop a semiempirical relationship which correlated well with an established model in terms of cutting parameters. Results indicated that experimental values correlated better with the model of thrust for 6 mm drill size than for 10 mm and torque correlated better for lower feed ranges than for the higher feed ranges.

Keywords

glass fiber-reinforced thermoplastics drilling thrust and torque specific cutting energy contact molding

Get full access to this article

View all access options for this article.

References

Wong, T. L. , Wu, S. M. and Croy, G. M. (1982). An Analysis of Delamination in Drilling Composite Materials , 14th National SAMPE Technical Conference October 12-14, pp. 471-483 .

Mackey, B. A. (1982). A Practical Solution for the Machining of Accurate, Clean, Burr Free Holes in Kevlar Composites , In: Proc. 37th Conf. Soc. Plastics Industry, pp. 1-5 .

Koenig, W. (1984). Developments in Drilling and Contouring Composites Containing Kelvar , Prod. Engr., 63(3): 56-61 .

Hocheng, H. and Puw, H. Y. (Jan. 1993). Machinability of Fiber-Reinforced Thermoplastics in Drilling , Transactions of ASME, 115: 146-149 .

Shaw, M. C. and Oxford, Jr., C. J. (1957). On the Drilling of Metals: Part 2 - The Torque and Thrust in Drilling , Trans. ASME, 79: 139-148 .

Won, M. S. and Dharan, C. K. H. (Nov. 2002). Drilling of Aramid and Carbon Fiber Polymer Composites , Trans. ASME, 124: 778-783 .

Ozaki, Motoyoshi. Supervisory Control of Drilling of Composite Materials, PhD Theses, University of Berkeley.

Mohan, N. S. , Ramachandra, A. and Kulkarni, S. M. (2004). Influence of Machining Conditions on the Drilled Surface Quality of Glass Fiber-Reinforced Plastic Composites , National Conference on Advances in Mechanical Engineering Proceedings, Shimoga, India.