Compression Strength of Saline Water-exposed Epoxy System Containing Fly Ash Particles

Abstract

Epoxy systems with and without different volume fractions of fly ash particulate fillers are made and their absorption due to immersion in saline water maintained at room temperature are established through weight measurements recorded up to 100 h. The 100-h exposed samples are additionally subjected to compression tests to evaluate the strength. The results show that both neat epoxy and fly ash-bearing composites exhibit differing levels of aqueous medium absorption – it being less in ash-free samples. When the ash content in the system is large, the absorption levels are high. The data further revealed that the unexposed samples generally record an increasing strength value with ash content. However, for the exposed cases, a reversal in trend with the ash content is noticed. Attempts to explain these differing trends are made in this work by analyzing the features observed on the surface of compression-failed samples using fractography employing scanning electron microscopy (SEM).

Keywords

epoxy filler fly ash saline water exposure compression strength fractography

Get full access to this article

View all access options for this article.

References

Seymour, R. B. (1990). Engineering Polymer Source Book, Mc-Graw Hill Pub. Co., New York .

Ryan, B. and Tardy, B. (1978). Katz, H. S. and Milewski, J. V. (eds), Handbook of Fillers and Reinforcements for Plastics, pp. 301–316, Van Nostrand Reinfold Co., New York .

Corigliano, A , Rizzi, E and Papa, E (2000). Experimental Characterization and Numerical Simulations of a Syntactic-foam/Glass-fibre Composite Sandwich , Compos. Sc. and Tech., 60: 2169–2180 .

Kim, H. S. and Khamis, M. A. (2001). Fracture and Impact Behaviours of Hollow Micro-Sphere/Epoxy Resin Composites , Composites: A, 32: 1311–1317 .

Torrey, S. (1978). Coal Ash Utilisation – Fly Ash, Bottom Ash and Slag, Noyes Data Corporation, NJ, USA .

Mohapartra, R. and Rajagopala Rao, J. (2001). Some Aspects of Characterization, Utilization and Environmental Effects of Fly Ash , J. Chem. Technol. Biotechnol., 76(1): 9–26 .

Ulaganathan, M. and Pillai, T. M. (1996). Proceedings of National Seminar on Fly ash Utilisation, Neyvelli, India, p. 43-43 .

Adams, R. D. and Singh, M. M. (1995). The Effect of Immersion in Sea Water on the Dynamic Properties of Fibre-reinforced Flexibilised Epoxy Composites , Composite Structures, 31(2): 119–127 .

Gellert, E. P. and Turley, D. M. (1999). Sea Water Immersion Ageing of Glass-fibre Reinforced Polymer Laminates for Marine Applications , Composites-A, 30(11): 1259–1265 .

10.

Shackelford, J. F. and Alexander, W. (1992). The CRC Materials Science and Engineering Handbook, pp. 436–438, CRC Press, Boca Raton, FL, USA .

11.

Milewski, J. V. (1978). Katz, H. S. and Milewski, J. V. (eds), Handbook of Fillers and Reinforcements for Plastics, Van Nostrand Reinfold Co, New York .

12.

Kulkarni, S. M. (2002). Processing, Microstructural and Mechanical Behavioural Aspects of Fly Ash-Epoxy Composites, PhD Dissertation, Indian Institute of Science, India.

13.

Zellen, R. (1978). Physics of Amorphous Solids, pp. 183–188, John Wiley, New York .

14.

ASTM C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for use as a Mineral Admixture in Portland Cement Concrete, American Society for Testing of Materials, Philadelphia, USA.