A multiaxial loading on a laminate, combined with numerical optimization is utilized to determine the five elastic constants for a transversely isotropic composite material in this study. A special in-plane loader, capable of any combination of in-plane displacements plus a rotation is utilized for the testing portion. A corresponding finite element analysis model is created and numerical optimization is utilized to obtain the optimum engineering elastic constants. By utilizing only one test specimen geometry, the resources for determining the constitutive properties can be significantly reduced in terms of time and money, and more precise properties over a wider loading range are gained with this procedure.
Mast, P. W. , Nash, G. E. , Michopoulos, J. G. , Thomas, R. , Badaliance, R. and Wolock, I. (1995). Characterization of Strain-induced Damage in Composite based on the Dissipated Energy Density , Theoretical and Applied Fracture Mechanics, 22: 71–96 .
2.
Jones, Robert M. (1975). Micromechanical Behavior of a Lamina, Mechanics of Composite Materials, p. 85-85, Scripta Book Company, Washington, DC .
3.
Adams, D. F. and Doner, D. R. (January 1967). Transverse Normal Loading of a Unidirectional Composite , J. Composite Materials, 1: 4–17 .
4.
Barbero, Ever J. (1999). Introduction to Composite Material Design, Master of Science Thesis, Civil Engineering Department, Montana State University, Bozeman, MT.
5.
Halpin, J. and Tsai, S. W. (1969). Effects of Environmental Factors on Composite Materials, Air Force Materials Lab-Technical Report 67-423, Department of Defense, USA .
6.
Luciano, R. and Barbero, E. J. (1964). Formulas for the Stiffness of Composites with Periodic Microstructure , I. J. Solids Structures, 31: 2933–2944 .
7.
Hashin, Z. and Rosen, B. W. (1964). The Elastic Moduli of Fiber-Reinforced Materials , J. Applied Mechanics, June, 30: 223–230 .
8.
Tsai, S. W. and Hahn, H. T. (1980). Introduction to Composite Materials, Technomic, Lancaster, PA .
9.
Hull, D. (1981). An Introduction to Composite Materials, Cambridge University Press, Cambridge .
10.
Halpin, J. and Pagano, N. J. (1969). The Laminate Approximation for Random Oriented Composite , J. Composite Materials, 3: 720–724 .
11.
Jones, Robert M. (1974). Stiffness of Orthotropic Materials and Laminated Fiber-Reinforced Composites , AIAA Journal, January, 12: 112–114 .
12.
Chamis, C. C. and Sendeckyj, G. P. (July 1968). Critique on Theories Predicting Thermoelastic Properties of Fibrous Composites , J. Composite Materials, 2: 332–358 .
13.
Hashin, Zvi (1962). The Elastic Moduli of Heterogeneous Materials , J. Appl. Mech., March, 28: 143–150 .
14.
Hashin, Zvi and Rosen, B. Walter (1965). The Elastic Moduli of Fiber-Reinforced Materials , J. Appl. Mech., June 1964, 30: 223–232 . Errata, March, 219.
15.
Tsai, Stephen W. (July 1964). Structural Behavior of Composite Materials, NASA CR-71 (NASA Contractor Report) USA.
16.
Hewitt, R. L. and de Malherbe, M. C. (April 1970). An Approximation for the Longitudinal Shear Modulus of Continuous Fiber Composites , J. Composite Materials, 4: 280–282 .
17.
Cairns, D. S. , Mandell, J. F. , Scott, M. E. and Maccagnano, J. Z. (1999). Design and Manufacturing Considerations for Ply Drops in Composite Structures , Composites: Part B, 30: 523–534 .
18.
Cairns, D. S. , McKittrick, L. , Combs, D. , Mandell, J. F. , Rabern, D. and VanLuchene, R. (1999). Design/Manufacturing Synthesis of a Composite Blade for the AOC 15/50 Wind Turbine Blade, In: 1999 ASME Wind Energy Symposium, pp. 58–65, USA.
19.
Cairns, D. S. , Sears, A. , Mandell, J. F. and McKittrick, L. R. (2000). Design Considerations for Buckling of Composite Wind Turbine Blades, In: 2000 ASME Wind Energy Symposium Collection of Papers, pp. 375–393, USA.
20.
Mandell, J. F. , Samborsky, D. D. and Cairns, D. S. (1997). Advanced Wind Turbine Blade Structure Development Program at Montana State University, In: 1997 ASME Wind Energy Symposium, ASME/ AIAA, AIAA-97-0952, pp. 189–196, USA.
21.
MSU Composite Database (1999). Composite Research Center, Montana State Univ. www.coe.montana.edu/composites/.
22.
Product Manual by Manufacturer of Fabric D155, Knytex, Type of Fabric: Weft Unidirectional, Stitched, Weight: 527 g/m2.
23.
Huang, Dongfang (2003). Constitutive Laws of Composite Materials via Multi-Axial Testing and Numerical Optimization, Chapter 2 Background, Master Thesis of Mechanical Engineering at Montana State University, Bozeman, MT.
24.
Tsai, Stephen W. (November 1966). Mechanics of Composite Material, Part II, Theoretical Aspects, Air Force Material Laboratory Tech. Rept. AFML-TR-66-149, ISBN: B0007 FTVDK. USA.
25.
Larsen, Erik , Cairns, Douglas , Mandell, John and Samborsky, Daniel (2002). Investigation of a Two-stage Injection Process to Reduce the Effects of In-plane Resin Flow, AIAA-2002-0026. 2002 ASME Wind Energy Symposium, Reno, NV.
26.
ANSYS V7.1 Manual, SAS IP, Inc. (2002). On-line Support.
27.
Nocedal, Jorge and Wright, Stephen J. (1999). Numerical Optimization, Springer-Verlag New York, Inc.
28.
Pierre, Donald A. (1969). Optimization Theory with Application, John Wiley & Sons, Inc., USA .
