Studies on Tensile and Interlaminar Shear Strength Properties of Thermally Cured and Microwave Cured Glass

Abstract

Experimental studies are carried out on two different glass–epoxy composites (one room temperature curing epoxy–amine system and the other, an elevated temperature curing epoxy–amine system) subjected to two different curing techniques (thermal and microwave), in order to investigate the effects on their thermomechanical properties. Microwave (MW) curing is carried out using a laboratory scale, custom-built, multi-mode microwave cure chambery operating at a frequency of 2450 MHz.

Tensile and interlaminar shear strength (ILSS) properties of the MW cured composites either compared well, or were superior, to those of their thermally cured counterparts, offering the added advantages of reduced cure cycle time, uniformity of cure, and substantial energy savings. Further, the glass transition temperature (T_g) values of MW cured composite laminates are slightly superior to those of thermally cured laminates.

Keywords

glass–epoxy thermal cure microwave thermomechanical properties uniform cure energy savings

Get full access to this article

View all access options for this article.

References

Ward, T. C. and Chen, M. (1992). Basic Ideas of Microwave Processing of Polymers, Abstr. Pap. ACS; 203 Part 3, 170-PMSE.

Jow, J. , DeLong, J. D. and Hawley, M. C. (1989). Computer Controlled Pulsed Microwave Processing of Epoxy , SAMPE Quarterly, 20(2): 46–50 .

Thostenson, E. T. and Chou, T. W. (1999). Microwave Processing: Fundamentals and Applications , Composites: Part A, 30: 1055–1071 .

Gourdenne, A. , Massarani, A. H , Monchaux, P. , Aussudre, S. and Thourel, L. (1979). Crosslinking of Thermosetting Resins by Microwave Heating: Quantitative Approach , Polymer Reprints, 20(2): 471-471 .

Le Van , Quang and Gourdenne, A. (1987). Microwave Curing of Epoxy Resins with Diamino Diphenyl Methane-1: General Features , Eur. Polym. J., 23b(10): 777–780 .

Gourdenne, A. and Le Van, Q. (1981). Intl. Symp. On Macromolecules , IUPAC Strasbourg, A(1): 128-128 .

Singer, S. M. , Jow, J. , De Long, J. D. and Hawley, M. C. (1989). Effects of Processing on Tensile Properties of an Epoxy-amine Matrix: Continuous Electromagnetic and/or Thermal Curing , Polym. Mater. Sci. Eng., 60: 869-869 .

Mijovic, J. and Wijaya, J. (1990). Comparative Calorimetric Study of Epoxy Cure by Microwave vs Thermal Energy , Macromolecules, 23: 3671–3674 .

Finzel, M. C. (1987). Comparison of Multimode Microwave and Thermal Methods for Curing Epoxy/Amine Systems , In: Paper Presented at AICHE Conf. On Emerging Technologies in Materials, Aug 20.

10.

Strand, N. S. (1980). Fast Microwave Curing of Thermoset Parts , Modern Plastics, 57(10): 64-64 .

11.

Karmazsin, E. , Satre, P. and Rochas, J. F. (1985). Use of Continuous and Pulsed Microwaves for Quick Polymerization of Epoxy Resins: Study of some Thermomechanical Properties , Thermochimica Acta, 93: 305-305 .

12.

Mijovic, J. , Corso, W. V. , Nicolais, L. and d Ambrosio, G. (1998). In-situ Real Time Study of Crosslinking Kinetics in Thermal and Microwave Fields , Polymers for Advanced Technologies, 9(4): 231–243 .

13.

14.

Martinelli, M. , Rolla, P. A. and Tombari, E. (1985). A Method for Dynamic Dielectric Measurements at Microwave Frequencies: Applications to Polymerisation Process Studies , IEEE Transactions on Instrumentation and Measurement, IM-34(3): 417–421 .

15.

Kranbuel, D. , Delos, S. , Yi, E. et al. (1986). Dynamic Dielectric Analysis: Nondestructive Material Evaluation and Cure Cycle Monitoring , Poly. Eng. Sci., 26(5): 338–345 .

16.

Mijovic, J. , Kenny, J. M. , Maffezzoli, A. , Bellucci, F. and Nicolais, L. (1993). The Principles of Dielectric Measurements for In-situ Monitoring of Composite Processing , Compos. Sci. Tech., 49: 277–290 .

17.

Beldjoudi, Nadir and Gourdenne, Albert (1988). Microwave Curing of Epoxy Resins with Diaminodiphenylmethane-IV. Average Electrical Power and Pulse Length Dependence in Pulsed Irradiation , Eur. Polym. J., 24(3): 265–270 .

18.

Beldjoudi, Nadir , Bouaziz, Abdelaziz , Douibi, Driss and Gourdenne, Albert (1988). Microwave Curing of Epoxy Resins with Diamino Diphenyl Methane-II. Crosslinking under Continuous or Pulsed Waves , Eur. Polym. J., 24(1): 49–52 .

19.

Beldjoudi, Nadir and Gourdenne, Albert (1988). Microwave Curing of Epoxy Resins with Diamino Diphenyl Methane-III. Pulse Frequency Dependence in Pulsed Irradiation , Eur. Polym. J., 24(1): 53–59 .

20.

Pankaj, S. Mooteri , Rao, Sandhya , Prakash, M. R. , Sridhara, B. K. and Rao, R. M. V. G. K. (Jul 2005). Studies on Mechanical Behaviour of Microwave and Thermally Cured Glass Fibre Reinforced Polymer Composites , Journal of Reinforced Plastics & Composites, Accepted for publication (Jul 2005).

21.

Zhou, S. and Hawley, M. C. (2003). A Study of Microwave Reaction Rate Enhancement Effect in Adhesive Bonding of Polymers and Composites , Composite Structures, 61: 303–309 .

22.

Boey, F. Y. C. and Yue, C. (1991). Interfacial Strength of a Microwave Cured Epoxy-glass Composite , J. Mater. Sci. Lett., 10: 1333–1334 .

Studies on Tensile and Interlaminar Shear Strength Properties of Thermally Cured and Microwave Cured Glass–Epoxy Composites

Abstract

Keywords

Get full access to this article

References