Heat Transfer Studies on Glass Epoxy Composite Laminates - Effects of Heating Rate and Fiber Fraction

Abstract

Experimental studies are carried out on heat transfer characteristics of RT-cured glass epoxy composite laminates of varied fiber fraction (0.2, 0.32, and 0.5), subjected to different heating rates (2, 6, and 10 C/min). The studies include laminates of different thicknesses (2, 4, and 6 mm), and laminate front wall temperatures (50 and 70 C). The ‘temperature-time profiles’ generated as functions of these parameters, using a custom-built laminate heating system, are discussed considering the effective thermal conductivity of the composite as a deterministic factor. The heat transport process has been analyzed in terms of two significant characteristics quantifying how fast and how close the laminate back wall temperature reaches a set front wall temperature. It has been found that the heating rate, R, and the composite fiber fraction, v_f, significantly influence the heat transport characteristics of the composite.

Keywords

conduction heat transfer glass epoxy laminates thermal conductivity temperature profiles saturation temperature

Get full access to this article

View all access options for this article.

References

Han, L. S. and Cosner, A. A. (1981). Effective Thermal Conductivities of Fibrous Composites , Journal of Heat Transfer, 103(2): 387-392 .

Loos, A. C. and Springer, G. S. (1983). Curing of Epoxy Matrix Composites , Journal of Composite Materials, 17(2): 135-160 .

Morimoto, K. , Suzuki, T. and Yosomiya, R. (1984). Thermal Conductivity and Thermal Expansion Behaviour of Glass-fibre Reinforced Rigid Polyurethane Foam , Polymer Engineering and Science, 24(12): 943-949 .

Agari, Y. , Ueda, A. and Nagai, S. (1991). Thermal Conductivity of a Polyethylene Filled with Disoriented Short-cut Carbon Fibres , Journal of Applied Polymer Science, 43(6): 1117-1124 .

Hasselman, D. P. H. , Donaldson, K. Y. and Thomas, J. R. (1993). Effective Thermal Conductivity of Uniaxial Composite with Cylindrically Orthotropic Carbon Fibres and Interfacial Thermal Barrier , Journal of Composite Materials, 27(6): 637-643 .

Gorthala, R. , Roux, J. A. , Vaughan, J. G. and Donti, R. P. (1994). Comparison of Processing Parameters for Pultruded Graphite/Epoxy and Fibreglass/Epoxy: A Heat Transfer and Curing Model , Journal of Reinforced Plastics & Composites, 13(4): 288-300 .

Ramani, K. and Vaidyanathan, A. (1995). Finite Element Analysis of Effective Thermal Conductivity of Filled Polymeric Composites , Journal of Composite Materials, 29(13): 1725-1739 .

Amazouz, M. and Gauvin, R. (1997). Solving Heat Dissipation Problems in Unidirectional Composite Structure , Journal of Reinforced Plastics & Composites, 16(18): 686-697 .

Pantano, A. and Averill, R. C. (2002). An Improved Thermal Lamination Model for Analysis of Heat Transfer in Composite Structures , Journal of Composite Materials, 36(6): 701-719 .