Modeling Young's Modulus of Polymer-layered Silicate Nanocomposites Using a Modified Halpin

Abstract

In this study nanocomposites consisting of an epoxy matrix filled with silicate clay particles are investigated. Recent and ongoing research has shown that dramatic enhancements can be achieved in stiffness and thermal properties in these nanocomposites with small amounts of particle concentration. The resulting properties of nanocomposites are intimately related to the microstructure achieved in processing these materials. However, the ideal situation of full exfoliation, dispersion, and orientation is not usually achieved. A more common case is the partial exfoliation and intercalation. The latter is a process whereby the polymer penetrates the interlayer spaces of clay particles, causing an increase in the layer spacing (d-spacing). The region consisting of a matrix with exfoliated clay nanolayers or platelets is analyzed by assuming a near uniform-dispersion and a random orientation. The properties of intercalated clusters of clay platelets are calculated by a rule of mixtures based on a parallel platelet system. The modified composite theory of Halpin—Tsai is applied to calculate the modulus of the nanocomposite as a function of the clay concentration for various parametric variations, including the exfoliation ratio, the particle/matrix stiffness ratio Ef/Em, the particle volume fraction f, and the particle aspect ratio L/t. The modified composite theory satisfactorily captures the stiffness behavior of the polymer/clay composites.

Keywords

polymer clay nanocomposite micromechanical modeling

Get full access to this article

View all access options for this article.

References

Shepherd, P. D. , Golemba, F. J. and Maine, F. W. (1974). Adv. Chem. Ser., 134: 41-41 .

LeBaron, P. C. , Wang, Z. and Pinnavaia, T. J. (1999). Polymer-layered Silicate Nanocomposites: an Overview , App. Clay Sci., 15(1): 11-29 .

Messersmith, P. B. and Giannelis, E. P. (1994). Synthesis and Characterization of Layered Silicate-Epoxy Nanocomposites , Chem. Mater., 6(10): 17-19 .

Messersmith, P. B. and Giannelis, E. P. (1995). Synthesis and Barrier Prosperities of Poly("-caprolactone)Layered Silicate Nanocomposite , J. Polym. Sci., Polym. Chem., 33: 1047-1053 .

Gilman, J. W. (1999). Flammability and Thermal Stability Studies of Polymer Layered-Silicate (Clay) Nanocomposites , Appl. Clay Sci., 15(1): 31-49 .

Vaia, R. A. , Price, G. , Ruth, P. N. , Nguyen, H. T. and Lichtenhan, J. (1999). Polymer/layered Silicate Nanocomposites as High Performance Ablative Materials , Appl. Clay. Sci., 15(1): 67-92 .

Yung, K. C. , Wang, J. and Yue, T. M. (2005). Fabrication Epoxy-montmorillonite Hybrid Composites Used for Printed Circuit Board via in-situ Polymerization, accepted by Adv. Composite Mater., in press.

Hui, C. Y. and Shia, D. (1998). Simple Formulas for the Effective Moduli of Unidirectional Aligned Composites , Polym. Eng. Sci., 38(5): 774-782 .

Shia, D. , Hui, C. Y. , Burnside, S. D. and Giannelis, E. P. (1998). An Interface Model for the Prediction of Young's Modulus of Layered Silicate-elastomer Nanocomposites , Polym. Composite, 19(5): 608-617 .

10.

Brune, D. A. and Bicerano, J. (2002). Micromechanics of Nanocomposites: Comparison of Tensile and Compressive Elastic Moduli, and Prediction of Effects of Incomplete Exfoliation and Imperfect Alignment on Modulus , Polymer, 43(2): 369-387 .

11.

Nam, P. H. , Maiti, P. , Okamoto, M. , Kotaka, T. , Hasegawa, N. and Usuki, A. (2001). A Hierarchical Structure and Properties of Intercalated Polypropylene/Clay Nanocomposites , Polymer, 42(23): 9633-9640 .

12.

Sheng, N. , Boyce, M. C. , Parks, D. M. , Rutledge, G. C. , Abes, J. I. and Cohen, R. E. (2004). Multiscale Micromechanical Modeling of Polymer/Clay Nanocomposites and the Effective Clay Particle , Polymer, 45(2): 487-506 .

13.

Fornes, T. D. and Paul, D. R. (2003). Modeling Properties of Nylon 6/Clay Nanocomposites Using Composite Theories , Polymer, 44(17): 4993-5013 .

14.

Yakobson, B. I. , Brabec, C. J. and Bernholc, J. (1996). Nanomechanics of Carbon Tubes: Instabilities beyond Linear Response , Phys. Rev. Lett., 76(14): 2511-2514 .

15.

Pantano, A. , Parks, D. M. and Boyce, M. C. (2004). Mechanics of Axial Compression of Single and Multi-Wall Carbon Nanotubes , J. Eng. Mater. Tech., 126(3): 279-284 .

16.

Tsipursky, S. I. and Drits, V. A. (1984). Clay Miner., 19: 177-193 .

17.

van Olphen, H. (1977). An Introduction to Clay Colloid Chemistry: For Clay Technologists, Geologists, and Soil Scientists, 2nd edn, New York, Wiley .

18.

Clark, S. P. (ed.) (1966). Handbook of Physical Constants, rev. edn, pp. 50-89, Geological Society of America, New York .

19.

Halpin, J. C. (1969). J. Compos. Mater., 3: 732-734 .

20.

Halpin, J. C. and Kardos, J. L. (1976). Polym. Engng. Sci., 16(5): 344-352 .

21.

Ashton, J. E. , Halpin, J. C. and Petit, P. H. (1969). Primer on Composite Materials: Analysis, Stamford, Conn: Techomic Pub. Co.

22.

Hermans, J. (1967). Proc Kon Ned Akad v Wetensch B, 65: 1-9 .

23.

Hill, R. (1964). J. Mech. Phys. Solids, 12: 119-119 .

24.

Tandon, G. P. and Weng, G. (1984). J. Polym. Compos., 5(4): 327-333 .

25.

Ramsteiner, F. (1981). Composites, 12(1): 65-71 .

26.

Hsueh, C. H. (2000). Young's Modulus of Unidirectional Discontinuous-fibre Composites , Compos. Sci. Technol., 60(14): 2671-2680 .

27.

Biolzi, L. , Castellani, L. and Pitacco, I. (1994). On the Mechanical Response of Short Fibre Reinforced Polymer Composites , J. Mater. Sci., 29(9): 2507-2512 .

28.

Chao, L. P. and Huang, Y. S. (2000). On Predicting Elastic Moduli and Natural Frequencies of Multi-phase Composites with Randomly Distributed Short Fibers , Polym. Compos., 21(1): 20-27 .

29.

van Es, M. , Xiqiao, F. , van Turnhout, J. and van der Giessen, E. (2003). Comparing Polymer-Clay Nanocomposites with Conventional Composites using Composite Modeling, In: Al-Malaika, S. , Golovoy, A. W. , Fornes, T. D. and Paul, D. R. (eds), Polymer Specialty Polymer Additives: Principles and Applications, CA Malden, MA: Blackwell Science ; 2001, Vol. 5012(44), Chapter 21, pp. 4993-5013.

30.

Hui, C. Y. and Shia, D. (1998). Simple Formulae for the Effective Moduli of Unidirectional Aligned Composites , Polym. Eng. Sci., 38(5): 774-782 .

31.

Shia, D. , Hui, C. Y. , Burnside, S. D. and Giannelis, E. P. (1998). An Interface Model for the Prediction of Young's Modulus of Layered Silicate-Elastomer Nanocomposites , Polym. Compos., 19(5): 608-617 .

32.

Chow, T. S. (1980). J. Mater. Sci., 15(8): 1873-1888 .

33.

Tucker, III, C. L. and Liang, E. (1999). Stiffness Predictions for Unidirectional Short-fiber Composites: Review and Evaluation , Compos. Sci. Technol., 59(5): 655-671 .

34.

Myoung, W. N. and Dong, C. L. (1999). Synthesis and Characterization of PS-clay Nanocomposite by Emulsion Polymerization , Polymer Bulletin, 42(5): 619-626 .

35.

Sheng, N. (2002). Micro/Nanoscale Modeling of Anisotropic Mechanical Properties of Polymer/Layered-silicate Nanocomposites, Master's Thesis, Department of Mech. Engng., Massachusetts Institute of Technology, Cambridge, MA, USA .

Modeling Young's Modulus of Polymer-layered Silicate Nanocomposites Using a Modified Halpin—Tsai Micromechanical Model

Abstract

Keywords

Get full access to this article

References