Grafting of Acrylamide and Acrylic Acid onto Polyethylene Fiber for Improved Adhesion to Epoxy Resin

Abstract

Surface modification of polyethylene (PE) fiber via 2-stage grafting to improve its adhesion to epoxy resin was studied. The PE fiber was first functionalized by thermal decomposition of potassium peroxydisulfate to create grafting sites. In the second stage, functionalized fiber was grafted with acrylamide (AAm) and acrylic acid (AAc) monomer by Ceric (IV) ion technique. The adhesion of grafted fibers to epoxy resin was studied by a single fiber pull out test. Pull out strength increases about 2 folds after functionalization and 3.5 and 4.8 folds after grafting with AAm and AAc, respectively. The improvement in pull out strength after functionalization and grafting are due to physical interaction and the formation of chemical bonding, respectively. Traces of transfering materials on the surface of pulled out fiber suggested that failure could be due to cohesive failure of either epoxy resin or grafted layer. Preliminary study of surface grafted fiber/epoxy composite showed significant improvement in flexural and impact strength over unreinforced resin and untreated fiber reinforced composite.

Keywords

polyethylene fiber surface grafing adhesion.

Get full access to this article

View all access options for this article.

References

Nardin, M. and Ward, I.M. (1987). Influence of Surface Treatment on Adhesion of Polyethylene Fibres, Mater. Sci. Tech., 3: 814.

Li, Z.F. , Netravali, A.N. and Sachse, W. (1992). Ammonia Plasma Treatment of Ultra-high Strength Polyethylene Fibres for Improved Adhesion to Epoxy Resi, J. Mater. Sci., 27: 4625.

Tissington, B. , Pollard, G. and Ward, I.M. (1992). A Study of the Effects of Oxygen Plasma Treatment on the Adhesion Behaviour of Polyethylene Fibres, Compos. Sci. Technol., 44: 185.

Ladizesky, N.H. and Ward, I.M. (1986). Ultra-high-modulus Polyethylene Fibre Composites: I-The Preparation and Properties of Conventional Epoxy Resin Composites, Compos. Sci. Tech., 26: 129.

Clark, D.A. , Ladizesky, N.H. and Chow, T.W. (1992). Acrylic Resins Reinforced with Highly Drawn Linear Polyethylene Woven Fibers. 1. Construction of Upper Denture Bases, Aust. Dent. J., 37: 394.

Moon, S.I. and Jang, J. (1998). Factors Affecting the Interfacial Adhesion of Ultrahigh-modulus Polyethylene Fibre-vinylester Composites using Gas Plasma Treatment, J. Mater. Sci., 33: 3419.

Chan, C.M. (1994). Polymer Surface Modification and Characterization , New York: Hanser; p. 193, chapter 5.

Kildal, K. , Olafsen, K. and Stori, A. (1992). Peroxide-initiated Grafting of Acrylamide onto Polyethylene Surfaces, J. Appl. Polym. Sci., 44: 1893.

Bamford, C.H. and Al-Lamee, K.G. (1994). Studies in Polymer Functionalization and Grafting for Biomedical and other Application , Polymer, 35: 2844.

10.

Ranby, B. (1996). Surface Photografting onto Polymers-A New Method for Adhesion Control, In: Mittal, K. L. (ed.), Polymer Surface Modification: Relevance to Adhesion , p. 303, chapter 19, Utrecht: VSP.

11.

Yu, Z.J. , Kang, E.T. , Neoh, K.G. and Tan, K.I. (2001). Surface Passivation of Epoxy Resin with a Covalently Adhered Poly(tetrafluoroethylene) Layer, Surface & Coatings Technology, 138: 48.

12.

Chen, K.S. , Uyama, Y. and Ikada, Y. (1993). Adhesive-free Adhesion of Grafted Surface with Different Wettabilities, In: Mittal, K. L. (ed). Contact Angle, Wettability and Adhesion, p. 865, chapter 56, Utrecht: VSP.

13.

Kang, E.T. , Neoh, K.G. , Tan, K.L. and Liaw, D.J. (1998). Surface Modification of Polymer Films by Graft Copolymerization for Adhesive-free Adhesion, Polymer, 39: 2429.