Effects of Moisture on Dynamic Mechanical Properties of Wood Fiber Composites Studied by Dynamic FT-IR Spectroscopy

Abstract

Wood fiber reinforced polylactide is a biodegradable composite where both fibers and matrix are from renewable resources. In the development of such new materials, information on mechanical behavior on the macroscopic and the molecular level is useful. In this study, dynamic Fourier transform infrared (FT-IR) spectroscopy is used to measure losses at the molecular level during cyclic tensile loading for bonds that are characteristic of the cellulosic fibers and the polylactid matrix. This molecular behavior is compared with measured macroscopic hysteresis losses for different moisture levels. The results show that moisture ingress will transfer the load from the fibers to the matrix, and that a more efficient fiber-matrix interface would diminish mechanical losses. Although the dynamic FT-IR spectroscopy method is still qualitative, this investigation shows that it can provide information on the stress transfer of the constituents in wood fiber reinforced plastics.

Keywords

wood fiber dynamic FT-IR stress transfer moisture interface.

Get full access to this article

View all access options for this article.

References

Nabi Saheb, A. and Jog J.P. (1999). Natural Fiber Polymer Composites: A Review, Advances in Polymer Science , 24(2): 221-274.

Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibres, Progress in Polymer Science, 24(2): 221-274.

Oksman, K. and Selin, J.F. (2004). Plastics and Composites from Polylactic Acid, In: Wallenberger F. T., Weston, N. (eds), Natural Fibres, Plastics and Composites , pp. 150-165, Boston.

Narkis, M. and Chen, E.J.H. (1988). Review of Methods for Characterization of Interfacial Fiber-Matrix Interactions, Polymer Composites, 9(4): 245-251.

Akerholm, M. , Berthold, F. , Lindström, M. and Salmen, L. (2005). Dynamic FT-IR Spectroscopy -A Suitable Tool for Fibre-Matrix Interfacial Characterisation of Wood Fibre Composites?, In: The 13th ISWFPC Pre-Symposium, Rotorua, pp. 95-100.

Noda, I. , Dowery, A.E. and Marcott, C. (1987). Characterization of Polymers, pp. 33-59, Plenum Press, New York.

Noda, I. , Dowery, A.E. and Marcott, C. (1983). Dynamic Infrared Linear Dichroism of Polymer Films Under Oscillatory Deformation, Polymer Science: Polymer Letters Edition, 21: 99-103.

Hinterstoisser, B. and Salmen, L. (1999). Two-Dimensional Step-Scan FTIR: A Tool to Unravel the OH-Valency-Range of Cellulose, Cellulose, 6(3): 251-263.

Akerholm, M. and Salmen, L. (2001). Interactions Between Wood Polymers Studied by Dynamic FT-IR Spectroscopy, Polymer , 42(3): 963-969.

10.

Akerholm, M. and Salmen, L. (2004). Softening of Wood Polymers Induced by Moisture Studied by Dynamic FT-IR Spectroscopy , Journal of Applied Polymer Science, 94(5): 2032-2040.

11.

Wang, Y. , Aubuchon, S.R. , Smith, M.E. , Schoonover, J.R. and Palmer, R.A. (2005). Dynamic Infrared Linear Dichroism Study of the Temperature-Dependent, Viscoelastic Behavior of a Poly(ester urethane), Applied Spectroscopy, 59(3): 305-315.

12.

Galiotis, C. , Paipetis, A. and Marston, C. (1999). Unification of Fibre/Matrix Interfacial Measurements with Raman Microscopy, Journal of Raman Spectroscopy, 30(10): 899-912.

13.

Young, R.J. (1996). Evaluation of Composite Interfaces Using Raman Spectroscopy, Key Engineering Materials, 116: 173-192.

14.

Norman, B. (1989). Overview of the Physics of Forming, In: Fundaments of Papermaking: Transactions of the 9th Fundamental Research Symposium, London, Mechanical Engineering Publications , pp. 73-147. 15. Hinterstoisser, B. , Akerholm, M. and Salmen, L. (2001). Effect of Fiber Orientation in Dynamic FTIR Study on Native Cellulose, Carbohydrate Research , 334(1): 27-37.

15.

Lloyd, M.D. and Chalmers, I.R. (2001). Use of Fibre Orientation Analysis to Investigate Sheet Structural Problems During Forming, Appita, 54(1): 15-21.

16.

Garlotta, D. (2001). A Literature Review of Poly(Lacticacide), Journal of Polymers and the Environment , 9(2): 63-84.

17.

Noda, I. (1990). Two-Dimentional Infrared (2D IR) Spectroscopy: Theory and Applications, Applied Spectroscopy, 44(4): 550-561.

18.

Marcott, C. , Dowery, A.E. and Noda, I. (1994). Dynamic Two-Dimentional IR Spectroscopy, Analytical Chemistry, 66(21): 1065-1075.

19.

Liang, C.Y. and Marchessault, R.H. (1959). Infrared Spectra of Crystalline Polysaccharides. II. Native Celluloses in the Region From 640 to 1700 cm-1 , Journal of Polymer Science, 39(135): 269-278.

20.

Kister, G. , Cassanas, G. and Vert, M. (1998). Effects of Morphology, Conformation and Configuration on the IR and Raman Spectra of Various Poly(lactic acid)s, Polymer, 39(2): 267-273.

21.

Schimleck, L.R. , Evans, R. , Ilic , J. and Matheson, A.C. (2002). Estimation of Wood Stiffness of Increment Cores by Near-Infrared Spectroscopy , Canadian Journal of Forest Research, 32(1): 129-135.