Temperature Dependence of Accumulation of Fiber Breakages under Tensile Loading for Unidirectional CFRP Laminates

Abstract

The temperature dependence of the tensile damage process as well as the tensile strength in unidirectional carbon fiber-reinforced plastic (CFRP) laminates is investigated experimentally and numerically. The constant strain rate (CSR) tensile tests for CFRP laminates are carried out at room temperature (RT) and 120°C. The damage process under tensile loading is recorded by using a digital microscope to comprehend the accumulation of fiber breakages observed with increasing strain. The fiber breakages observed under tensile loading increase strongly in the vicinity of ultimate failure load, and this behavior decreases with increasing temperature. The clusters of fiber breakages observed at RT cannot be observed at 120°C. These experimental results lead to the fact that the number of fiber breakages and the existence of cluster of fiber breakages are influenced by the temperature dependent stress-strain relation of matrix resin. Then, a new simulation based on finite element model considering the stress-strain relation of matrix resin is proposed. The damage process and strength predicted numerically by the proposed simulation agree well with experimental results. Therefore, the temperature dependent mechanism for the damage process, including the generation of clusters as well as the strength, is quantitatively shown.

Keywords

CFRP fracture viscoelasticity modeling numerical simulation.

Get full access to this article

View all access options for this article.

References

Hedgepeth, J.M. and Van Dyke, P. (1967). Local Stress Concentrations in Imperfect Filamentary Composite Materials, Journal of Composite Materials, 1: 294-309.

Beyerlein, J.M. and Phoenix, S.L. (1997). Stress Concentrations Around Multiple Fiber Breaks in an Elastic Matrix with Local Yielding or Debonding using Quadratic Influence Superposition, Journal of the Mechanics and Physics of Solids, 44(12): 1997-2039.

Curtin, W.A. and Takeda, N. (1998). Tensile Strength of Fiber Reinforced Composites: I. Model and Effects of Local Fiber Geometry, Journal of Composite Materials, 32(22): 2042-2059.

Curtin, W.A. and Takeda, N. (1998). Tensile Strength of Fiber Reinforced Composites: II. Application to Polymer Matrix Composites, Journal of Composite Materials, 32(22): 2060-2081.

Okabe, T. , Takeda, N. , Kamoshida, Y. , Shimizu, M. and Curtin, W.A. (2001). 3D Shear-Lag Model Considering Micro-Damage and Statistical Strength Prediction of Unidirectional Fiber Reinforced Composites , Composites Science and Technology, 61: 1773-1787.

Durham, S.D. , Lynch, J.D. , Padgett, W.J. , Horan, T.J. , Owen, W.J. and Surles, J. (1997). Localized Load-Sharing Rules and Markov-Weibull Fiber: A Comparison of Microcomposite Failure Data with Monte Carlo Simulation , Journal of Composite Materials, 31(18): 1856-1882.

Aboudi, J. and Cederbaum, G. (1989). Analysis of Viscoelastic Laminated Composites Plates, Composite Structures, 12: 243-256.

Nakada, M. , Miyano, Y. , Kinoshita, M. , Koga, R. , Okuya, T. and Muki, R. (2002). Time-Temperature Dependence of Tensile Strength of Unidirectional CFRP, Journal of Composite Materials, 36(22): 2567-2581.

Miyano, Y. , Kanemitsu, M. , Kunio, T. and Kuhn, H.A. (1986). Role of Matrix Resin on Fracture Strengths of Unidirectional CFRP, Journal of Composite Materials, 20: 520-538.

10.

Yagawa, G. and Miyazaki, N. (1985). Elastoplasticity and High Temperature Creep, Analyses of Thermal Stress, Creep and Thermal Conduction by the Finite Element Method, 2, p. 47, Science Co. (in Japanese)

11.

Goda, K. (2002). Creep-Rupture Lifetime Simulation of Unidirectional Metal Matrix Composites With and Without Time-Dependent Fiber Breakage, International Journal of Plasticity, 18: 1729-1748.

12.

Goda, K. (1999). The Role of Interfacial Debonding in Increasing the Strength and Reliability of Unidirectional Fibrous Composites, Composites Science and Technology, 59: 1871-1879.

13.

Yamada, Y. , Yoshimura, N. and Sakurai, T. (1968). Plastic Stress-Strain Matrix and its Application for the Solution of Elastic-Plastic Problems by the Finite Element Method , International Journal of Mechanical Sciences, 10: 343-354.