Effect of a Novel Coupling Agent,Polybutadiene Isocyanate,on Mechanical Properties of Wood-Fiber Polypropylene Composites

Abstract

The scope of the present paper is to study the effect of adding a novel coupling agent, polybutadiene isocyanate (PBNCO), on the mechanical properties of hardwood aspen fiber/polypropylene (PP) composites. The resulting properties were compared to those obtained with the most commonly used coupling agent, maleic anhydride modified polypropylene (MAPP). In this study, we determined a value of 24.75 MPa for the tensile strength of pure PP and 22 MPa for the composite containing 30 or 40wt% unmodified fibers. These results indicate that wood fiber behaves merely as filler when incorporated into PP and no reinforcing effect was observed in this case. This occurs because of the chemical incompatibility between the thermoplastic PP and the polar fiber, resulting in low interfacial adhesion. However, it was verified that addition of 3% MAPP and 5% PBNCO to this formulation produced composites with better performance, since the tensile and impact properties were increased up to 30 MPa and 22 J/m², respectively. This behavior can be attributed to the enhanced interfacial bond between reinforcing fibers and polymer matrix modified MAPP and PBNCO treatments, play a significant role in improving the mechanical properties of the composites. The increase in mechanical properties demonstrated that PBNCO is an effective coupling agent for wood fiber/PP composites.

Keywords

wood—plastic composites cellulosic fiber coupling agents mechanical properties polymer matrix.

Get full access to this article

View all access options for this article.

References

Bismarck, A. , Baltazar, Y.-J. and Sarlkakis , K. (2006). Green Composites as Panacea? Socio-Economic Aspects of Green Materials, Environment, Development and Sustainability , 8(3): 445-463.

Nachtigall, S.M.B. , Cerveira, G.S. and Rosa, S.M.L. (2007). New Polymeric-coupling Agent for Polypropylene/Wood-flour, Polymer Testing, 26(5): 619-628.

Pasquini, D. , Morais Teixeira, E. , Silva Curvelo, A.A. , Naceur Belgacem , M. and Dufresne, A. (2007). Surface Esterification of Cellulose Fibres: Processing and Characterisation of Low-density Polyethylene/ cellulose Fibres Composites , Composites Science and Technology, 68(1): 193-201.

Wu, J. , Yu, D. , Chan, C.-M. , Kim, J. and Mai, Y.-W. (2000). Effect of Fiber Pretreatment Condition on the Interfacial Strength and Mechanical Properties of Wood fiber/PP Composites , Journal of Applied Polymer Science, 76(7): 1000-1010.

Isogai, A. (2001). Chemical Modification of Cellulose. In: Hon, D. and Shiraishi, N. (eds), Wood and Cellulosic Chemistry, 2nd edn, Chapter 14, pp. 599-625.

Lindström, T. and Wagberg, L. (2002). An Overview of Some Possibilities to Modify Fibre Surfaces for Tailoring Composite Interfaces, Proceedings of 23rd Riso Int Symp Mat Sci Roskilde, pp. 35-59.

Cai, X. , Riedl, B. and Ait-Kadi, A. (2003). Effect of Surface-Grafted Ionic Groups on the Performance of Cellulose-Fiber-Reinforced Thermoplastic Composites, Journal of Polymer Science Part B, 41(17): 2022-2032.

Bengtsson, M. and Oksman, K. (2006). The Use of Silane Technology in Crosslinking Polyethylene/wood Flour Composites, Composites Part A, 37(5): 752-765.

Karmarkar, A. , Chauhan, S.S. , Modak , J.M. and Chanda, M. (2007). Mechanical Properties of Wood-Fiber Reinforced Polypropylene Composites: Effect of a Novel Compatibilizer with Isocyanate Functional Group, Composites Part A, 38(2): 227-233.

10.

Ferrer, F.M. , Vilaplana, F. , Greus , A.R. , Borras, A.B. and Box , C.S. (2006). Flour Rice Husk as Filler in Block Copolymer Polypropylene: Effect of Different Coupling Agents , Applied Polymer Science, 99(4): 1823-1831.

11.

Pracella, N. , Chionna, D. , Anguillesi , I. , Kulinski, Z. and Piorkowska, E. (2006). Functionalization, Compatibilization and Properties of Polypropylene Composites with Hemp Fibres, Composite Science Technology, 66(13): 2218-2230.

12.

Pickering, K.L. , Abdella, A. , Ji , C. , McDonald, A.G. and Franich, R.A. (2003). The Effect of Silane Coupling Agents on Radiate Pine Fiber for Use in Thermoplastic Matrix Composites , Composites Part A, 34(10): 915-926.

13.

Keener, T.J. , Stuart, R.K. and Brown, T.K. (2004). Maleated Coupling Agents for Natural Fibre Composites, Composites Part A, 35(3): 357-362.

14.

Georgopoulos, S. Th., Tarantili, P.A. , Avgerinos , E. , Andreopoulos, A.G. and Koukios, E.G. (2005). Thermoplastic Polymers Reinforced with Fibrous Agricultural Residues, Polymer Degradation and Stability, 90(2): 303-312.

15.

Li, X. , Tabil, L.G. and Panigrahi, S. (2007). Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review, Journal of Polymers and the Environment, 15(1): 25-33.

16.

Caraschi, J.C. and Leão, A.L. (2002). Woodflour as Reinforcement of Polypropylene, Material Resources, 5(4): 405-409.

17.

Yang, H.-S. , Kim, H.-J. , Park, H.-J. , Lee , B.-J. and Hwang, T.-S. (2006). Water Absorption Behavior and Mechanical Properties of Lignocellulosic Filler-Polyolefin Bio-composites , Composite Structures, 72(4): 429-437.

18.

Abdul Khalil, H.P.S. , Issam, A.M. , Ahmad Shakri , M.T. , Suriani, R. and Awang, A.Y. (2007). Conventional Agro-composites from Chemically Modified Fibres, Industrial Crops and Products, 26(3): 315-323.

19.

Vilaseca, F. , Mendez, J.A. , Pèlach , A. , Llop, M. , Cañigueral, N. , Gironès, J. , Turon, X. and Mutje, P. (2007). Composite Materials Derived from Biodegradable Starch Polymer and Jute Strands , Process Biochemistry, 42(3): 329-334.

20.

Park, B.D. and Balatinecz, J.J. (1997). Mechanical Properties of Wood Fiber/Toughened Isostatic Polypropylene Composites, Polymer Composites, 18(1): 79-89.

21.

Servais, C. , Luciani, A. , Manson, J.-A.E. (2002). Squeeze Flow of Concentrated Long Fibre Suspensions: Experiments and Model, Journal of Non-Newton Fluid Mechanics , 104(2-3): 165-184.

22.

Maldas, D. and Kokta, B.V. (1990). Effect of Extreme Conditions on The Mechanical Properties of Wood Fiber-Polystyrene Composites. II. Sawdust as a Reinforcing Filler, Polymer-Plastic Technology Engineering, 29(1-2): 119-165.

23.

Johns, W.E. and Jahan-Latibari, A. (1983). Wood Bonding by Surface Reaction, Journal of Adhesion, 15(2): 105-115.

24.

Maldas, D. , Kokta, B.V. and Daneault, C. (1989). Thermoplastic Composites of Polystyrene: effect of Different Wood Species on Mechanical Properties, Journal of Applied Polymer Science, 38(3): 413-439.

25.

Raj, R.G. , Kokta, B.V. and Nizio, J.D. (1992). Studies on Mechanical Properties of Polyethylene-Organic Fiber Composites . I. Nut Shell Flour, Journal of Applied Polymer Science, 45(1): 91-101.