Nanocomposites, made by epoxy resin and multi wall carbon nanotubes (CNT) (0.5—1.5 wt%), were studied in this work. Mechanical and physical analyses were performed in order to investigate both mechanical performance and the cure kinetic. Experimental results suggested that the presence of carbon nanotubes modified the polymeric resin properties. The addition of a small amount (0.5%) of carbon nanotubes increased the cure reaction kinetic of the epoxy resin but induced a little embrittlement. Higher concentrations (1.0—1.5%) of CNTs reduced the molecular chains mobility, the cure reaction kinetic and the mechanical performance. The results presented in this work evidenced the necessity to increase the resin/nanotube interaction with an appropriate functionalization.
Popov, V.N. (2004). Carbon Nanotubes: Properties and Application, Materials Science and Engineering: R: Reports, 43(3): 61-102
2.
Fidelus, J.D. , Wiesel, E., Gojny , F.H., Schulte, K. and Wagner, H.D. (2005). Thermo-mechanical Properties of Randomly Oriented Carbon/epoxy Nanocomposites , Composites Part A, 36(11): 1555-1561.
Pumera, M., Merkoçi, A. and Alegret, S. (2006). Carbon Nanotube-Epoxy Composites for Electrochemical Sensing, Sensors and Actuators: B. Chemical, 113(2): 617-622.
5.
Hsiao, K.T., Alms, J. and Advani, S.G. (2003). Use of Epoxy/Multiwalled Carbon Nanotubes as Adhesives to Join Graphite Fibre Reinforced Polymer Composites, Nanotechnology , 14(7): 791-793.
6.
Song, Y.S. and Youn, J.R. (2005). Influence of Dispersion States of Carbon Nanotubes on Physical Properties of Epoxy Nanocomposites, Carbon, 43(7): 1378-1385.
7.
Wang, Z., Liang, Z., Wang, B., Zhang, C. and Kramer, L. (2004). Processing and Property Investigation of Single-walled Carbon Nanotube (SWNT) Buckypaper/Epoxy Resin Matrix Nanocomposites, Composites Part A, 35(10): 1225-1232.
8.
Puglia, D., Valentini, L. and Kenny, J.M. (2003). Analysis of the Cure Reaction of Carbon Nanotubes/ EpoxyResin Composites through Thermal Analysis and Raman Spectroscopy, Journal of Applied Polymer Science, 88(2): 452-458.
9.
Tao, K., Yang, S., Grunlan, J.C., Kim, J.S., Dang, B., Deng, Y., Thomas, R.L., Wilson, B.L. and Wei, X. (2006). Effects of Carbon Nanotube Fillers on the Curing Processes of Epoxy Resin-based Composites, Journal of Applied Polymer Science, 102(6): 5248-5254.
10.
Kim, J.A. , Seong, D.G., Kang , T.J. and Youn, J.R. (2006). Effects of Surface Modification on Rheological and Mechanical Properties of CNT/epoxy Composites , Carbon, 44(10): 1898-1905.
11.
Shen, J., Huang, W., Wu Liping, Hu, Y. and Ye, M. (2007). Thermo-physical Properties of Epoxy Nanocomposites Reinforced with Amino-fuctionalized Multi-walled Carbon Nanotubes, Composites Part. A, 38(5): 1331-1336.
12.
Visco, A.M., Calabrese, L. and Milone, C. (2006). Effetto Della presenza Di Nanotubi Di Carbonio Sulle Proprieta' Chemo-reologico-Meccaniche Di Una Resina Epossidica' Proc. 88 National Meeting AIMAT, Palermo, Italy, 27 June-1 July.
13.
Fernandez, B., Concuera, M.A., Marieta , C. and Mondragon, I. (2001). Rheokinetic Variations During Curing of a Tetrafunctional Epoxy Resin Modified with Two Thermoplastics , European Polymer Journal, 37(9): 1863-1869.
14.
Macan, J., Brnardi, I., Ivankovi, M. and Mencer, H.J. (2005). Dsc Study of Cure Kinetics of Dgeba-based Epoxy Resin with Poly(oxypropylene) Diamine, Journal of Thermal Analysis and Calorimetry, 81(2): 369-373.
15.
Xie, H., Liu, B., Yuan, Z., Shen, J. and Cheng, R. (2004). Cure Kinetics of Carbon Nanotube/tetrafunctional Epoxy Nanocomposites by Isothermal Differential Scanning Calorimetry, Journal of Polymer Science, Part B, 42(20): 3701-3712.
16.
Eloundou, J.P. , Feve, M., Harran , D. and Pascault, J.P. (1995). Comparative studies of Chemical-kinetics of an Epoxy-amine System, Angewandte Makromolecular Chemie, 230(1): 13-46.
17.
Visco, A.M., Calabrese, L.Cianciafara, P., Bonaccorsi, L. and Proverbio, E. (2007). Microwave Source Application for Polyester Resin Based Composites Polymerisation, Journal of Materials Engineering and Performance, 16(6): 792-799.
18.
Miyagawa, H. and Drzal, L.T. (2004). Thermo-physical and Impact Properties of Epoxy Nanocomposites Reinforced by Single-wall Carbon Nanotubes, Polymer, 45(15): 5163-5170.
19.
Ki-Young Kim and Lin Ye (2004). Interlaminar Fracture Toughness of CF/PEI Composites at Elevated Temperatures: Roles of Matrix Toughness and Fibre/matrix Adhesion , Composites Part A: Applied Science and Manufacturing, 35(4): 477-487.
20.
Ganguli, S., Aglan, H., Denning, P. and Irvin, G. (2006). Effect of Loading and Surface Modification of MWCNT on the Fracture Behaviour of Epoxy Nanocomposites, Journal of Reinforced Plastics and Composites, 25(2): 175-188.
21.
Balasubramanian, K. and Burghard, M. (2005). Chemically Functionalized Carbon Nanotubes, Small, 1(2): 180-192.
