Buckling and Post-buckling Behavior of Compression Loaded Composite Panels with Hat Stiffeners

Abstract

The aim of this study was to explore easy technologies for manufacturing of integral composite structures to evaluate the manufacturing concepts. This has been done by determining the buckling and post-buckling behavior of hat-stiffened composite panels under compression loading. A shadow Moiré technique was used to monitor the out-of-plane displacement of the skin panel. The experimental results of hat-stiffened panels for initial buckling and post-buckled response of the panels were compared with numerical results obtained from linear and non-linear finite element methods. It was found to be in reasonably good agreement with each other. The panels showed good post-buckling strength and total failure began with the local buckling of the hat stiffeners.

Keywords

carbon fibers structural composites fracture buckling finite element analysis.

Get full access to this article

View all access options for this article.

References

Elaldi, F. , Lee, S. and Scott, R.F. ( 1992). Design, Fabrication and Compression Testing of Stiffened Composite Panels for Aircraft Structures, National Research Center-Technical Report: NRC LTR-ST-1872, CA.

Starnes, J.H. , Knight, F.K. and Rouse, M. (1985). Post-Buckling of Selected Flat Stiffened Graphite Epoxy Panels Loaded in Uniaxial Compression, AIAA, 23(8): 1236-1246.

Buskell, N. , Davies, G.A.O. and Stevens, K.A. 1985). Post-Buckling Failure of Composite Panels, Proceedings of the Third International Conference on Composite Structures, pp. 290-294, Paisley, UK.

Falzon, B.G. and Steven, G.P. ( 1995). Post-Buckling Behavior of Hat-stiffened Thin Skinned Carbon Fiber Composite Panels, AIAA/ASME/AHS/ASC: Proceedings of the 36th Structures, Structural Dynamics and Materials Conference , New Orleans, LA, USA.

Singer, J. , Arbocz, J. and Weller, T. ( 1998). Experimental Methods in Buckling of Thin-walled Structures , Buckling Experiments, Vol. 1, Wiley, New York.

Stevens, K.A. , Ricci, R. and Davies, G.A.O. (1995). Buckling and Post-Buckling of Composite Structures, Composites, 26(3): 189-199.

Stevens, K.A. , Specht, S. and Davies, G.A.O. (1997). Post-Buckling Failure of Carbon Epoxy Compression Panels, Proceedings of ICCM-11 , Gold Coast, Australia.

Falzon, B.G. and Steven, G.P. (1997). Buckling Mode Transition in Hat-stiffened Composite Panels Loaded in Uniaxial Compression, Composite Structures, 37(2): 253-267.

Kong, C.W. , Lee, I.C. , Kim, C.G. and Hong, C.S. ( 1998). Post-Buckling and Failure of Stiffened Composite Panels under Axial Compression, Composite Structures, 42(1): 13-21.