Influence of Rigid Inserts on Shear Modulus and Strength of Sandwich Beams with Polyurethane Foam as Core

Abstract

In the present work, core shear modulus and flexural rigidity of sandwich panels with three different densities ranging from 100 to 300 kg/m³ and with two different thicknesses (8 and 6 mm) of polyurethane foams separated by glass fiber bi-woven impregnated with epoxy resin as facings have been experimentally determined as per ASTM C 393 and analyzed in the light of data obtained by other researchers. The influence of different volume fractions (0.1 and 0.2) of rigid inserts made of polyurethane foam of 900 kg/m³ density between facing and core at beam center on core shear modulus have been examined. The results have also been analyzed with core shear modulus obtained from direct shear test. Also, the failure modes of the sandwich panels and the corresponding strengths of the sandwich panels tested have been analyzed in detail. The influence of rigid inserts on the failure mode and strength of the sandwich panel has also been investigated.

Keywords

sandwich beam core shear modulus core shear strength rigid inserts inter-face bond strength polyurethane foam failure modes.

Get full access to this article

View all access options for this article.

References

Hartsock, J.A. (1969). Design of Urethane Foam Sandwich Structures, Journal of Cellular Plastics, 5: 188-193.

Swanson, S.R. and Kim, J. (2002). Optimization of Sandwich Beams for Concentrated Loads, Journal of Sandwich Structures and Materials, 4: 273-293.

http://www.boatdesign.net

http://www.mdacomposites.org

http://www.polymerexpert.biz

Lim, T.S. , Lee, S.L. and Lee, D.G. (2004). Failure Modes of Foam Core Sandwich Beams under Static and Impact Loads, Journal of Composite Materials, 38(18): 1639-1662.

Daniel, I.M. , Gdoutos, E.E. , Wang, K.-A. and Abot, J.L. ( 2002). Failure Modes of Composite Sandwich Beams, International Journal of Damage Mechanics, 11: 309-334.

Gupta, N. and Woldesenbet, E. ( 2005). Characterization of Flexural Properties of Syntactic Foam Core Sandwich Composites and Effect of Density Variation, Journal of Composite Materials, 39: 2197-2212.

ASTM C393, Standard Test Method for Flexural Properties of Sandwich Constructions.

10.

Gibson, I.J. and Ashby, M.F. ( 1997). The Mechanics of Foams: Basic Results, In: Cellular Solids: Structure and Properties, CUP, Cambridge, pp. 175-234.

11.

Lingaiah, K. and Suryanarayana, B.G. ( 1991). Strength and Stiffness of Sandwich Beams in Bending, Experimental Mechanics, pp. 1-7.

12.

Sharma, R.S. and Raghupathy, V.P. (2008). Shear Properties of Polyurethane Foams with Different Densities. Paper under review in International Journal of Material Science.