Studies on Bamboo/Glass Fiber Reinforced USP and VE Resin

Abstract

The effects of weight fraction and length of short bamboo and glass fibers on flexural strength and inter-laminar shear strength (ILSS) of vinyl ester resin and unsaturated polyester (USP) resins were investigated. The bamboo fibers were isolated from the bamboo plant by treating them with dilute solution of sodium hydroxide (0.1 and 1 N NaOH) for 72 h and then boiling them in a pressure cooker for 30 min. The fibers were separated, dried, and cut into 5 or 10 mm lengths. Composites were fabricated using vinyl ester resin or USP resin as binders. The flexural properties of glass/bamboo fiber reinforced vinyl ester resins were higher than those based on USP resins. This may be due to better wetting of the fibers by VE resins due to their low viscosity and possibility of hydrogen bond formation with hydroxyl group on bamboo fibers. Hybrid composites were fabricated using 50 wt% of fibers. The wt% of bamboo fibers in these hybrid composites was varied as 25, 50, and 75 wt% of chopped glass fibers (5 mm). Replacement of 25 wt% of glass fibers did not affect the flexural modulus and a marginal increase in ILSS was observed. However, replacement of 75% glass fibers by bamboo fibers resulted in a significant decrease in flexural strength, modulus and ILSS.

Keywords

bamboo fiber glass fiber vinyl ester resin flexural strength ILSS.

Get full access to this article

View all access options for this article.

References

Mohanty, A.K. , Misra, M. and Hinrichsen, G. (2000). Biofibers, Biodegradable Polymers and Biocomposites: An Overview, Macromol. Mater. Eng., 276/277: 1-24.

Varma, I.K. , Ananthakrishnan, S.R. and Krishnamurthy, S. ( 1989). Composites of Glass/Modified Jute Fabric and USP Resin , Composites, 20: 383-388.

Varma, D.S. , Varma, M. and Varma, I.K. ( 1985). Coir fibers: II, Evaluation as a Reinforcement in Unsaturated Polyester Resin Composites, Journal of Reinforced Plastics & Composites, 4(4): 419-431.

Shibate, M. , Tahachiyo, K.I. , Ozawa, K. , Yosomiya, R. and Taheishi, I.H. ( 2002). Biodegradable Polyester Composites Reinforced with Short Abaca Fibers, J. Appl. Polym. Sci., 85: 129-136.

Zhou, X.P. , Li, R.K.Y. , Xie, X.L. and Tjong, S.C. ( 2003). Reinforcement of Polypropylene using Sisal Fibers Grafted with Poly(methyl methacrylate), J. Appl. Polym. Sci., 88: 1055-1063.

Kumar, S. and Varma, I.K. ( 2004). Studies on Banana Fibers Reinforced Thermoplastics Composites , Int. J. Plastics Tech., 8: 165-172.

Jain, S. , Kumar, R. and Jindal, U.C. ( 1992). Mechanical Behaviour of Bamboo and Bamboo Composite, J. Matter Sci., 27: 4598-604.

Jain, S. , Kumar, R. and Jindal, U.C. ( 1993). Development and Fracture Mechanism of the Bamboo/ Polyester Resin Composite, J. Matter Sci. Lett., 12: 558-60.

Rajulu, A.V. , Baksh, S.A. , Reddy, G.R. and Chary, K.N. (1998). Chemical Resistance and Tensile Properties of Short Bamboo Fiber Reinforced Epoxy Composites, J. Reinforced Plast. Compos., 17(17): 1507-11.

10.

Chen, X. , Guo, Q. and Mi, Y. ( 1998). Bamboo Finer-Reinforced Polypropylene Composites: A Study of the Mechanical Properties, J. Appl. Polym. Sci., 69: 1891-1899.

11.

Okubo, K. , Fujii, T. and Yamamoto, Y. ( 2004). Development of Bamboo-based Polymer Composites and their Mechanical Properties, Composites: Part A, 35: 377-383.

12.

Thwe, M.M. and Liao, K. ( 2003). Durability of Bamboo-glass Fiber Reinforced Polymer Matrix Hybrid Composites, Composites Science and Technology, 63: 375-387.

13.

Thwe, M.M. and Liao, K. ( 2002). Effects of Environmental Aging on the Mechanical Properties of Bamboo-glass Fiber Reinforced Polymer Matrix Hybrid Composites, Composites: Part A, 33: 43-52.