On the Crush Behavior of an Ultra Light Multi-Cell Foam-Filled Composite Structure under Axial Compression

Abstract

In this article the results of experimental works pertaining to the crash behavior and crashworthiness characteristics of a novel multi-cell cost-effective crashworthy composite sandwich structure are presented. All the samples are based on the concept of the ‘triple-layered’ foam-filled block, i.e., three polyurethane foam core sheets, which are wrapped by reinforcement fiberglass woven fabric, that acts as the reinforcement face and meanwhile ties the foam layers and faces together, thus preventing catastrophic failure. The design, manufacturing, and crush testing of rectangular blocks are described. Experimental results indicate an efficient progressive collapse mechanism with high values of crushing force efficiency and specific energy absorption.

Keywords

composite sandwich structure crashworthiness triple-layered fiberglass fabric polyurethane foam energy absorption.

Get full access to this article

View all access options for this article.

References

Mamalis, A. , Robinson, M. , Manolakos, D. , Demosthenous, G. , Ioannidis, M. and Carruthers, J. ( 1997). Crashworthy Capability of Composite Material Structures, Compos. Struct., 37: 109-134.

Thorton, P. and Jeryan, R. ( 1988). Crash Energy Management in Composite Automotive Structures , Int. J. Impact. Eng., 7: 167-180.

Mamalis, A.G. , Manolakos, D.E. , Ioannidis, M.B. and Papapostolou , D.P. ( 2004). Crashworthy Characteristics of Axially Statically Compressed Thin-Walled Square CFRP Composite Tubes: Experimental, Composite Structures, 63: 347-360.

Thornton, P.H. (1979). Energy Absorption in Composite Structures, Journal of Composite Materials, 13: 247-262.

Mamalis, A.G. , Manolakos, D.E. , Ioannidis, M.B. and Papapostolou , D.P. ( 2005). On the Crushing Response of Composite Sandwich Panels Subjected to Edgewise Compression: Experimental, Composite Structures, 71(2): 246-257.

Taher, S.T. , Mahdi, E. , Mokhtar, A.S. , Magid, D.L. , Ahmadun, F.R. and Arora, P.R. ( 2006). A New Composite Energy Absorbing System for Aircraft and Helicopter, Composite Structures, 75: 14-23.

Pitarresi, G. , Carruthers, J.J. , Robinson, A.M. , Torre, G. , Kenny, J.M. , Ingleton, S. , Velecela, O. and Found, M.S. (2007). A Comparative Evaluation of Crashworthy Composite Sandwich Structures, Composite Structures , 78(1): 34-44.

Marur, P.R. ( 2005). Effective Elastic Moduli of Syntactic Foams, Materials Letters, 59(14-15): 1954-1957.

Gupta, N. , Woldesenbet, E. and Mensah, P. ( 2004). Compression Properties of Syntactic Foams: Effect of Cenosphere Radius Ratio and Specimen Aspect Ratio, Composites Part A: Applied Science and Manufacturing, 35(1): 103-111.

10.

Gupta, N. , Kishore, W. , Woldesenbet, E. and Sankaran, S. ( 2001). Studies on Compressive Failure Features in Syntactic Foam Material, Journal of Materials Science, 36(18).

11.

Rittel, D. ( 2005). Adiabatic Shear Failure of a Syntactic Polymeric Foam , Materials Letters, 59(14-15): 1845-1848.

12.

Hull, D. ( 1991). A Unified Approach to Progressive Crushing of Fiber-Reinforced Composite Tubes, Composites Science and Technology , 40(4): 377-421.