Poly(vinyl alcohol) (PVA) has a wide application in industry and the biomedicine area, but its poor water resistance and insufficient mechanical strength have severely limited its application. To overcome these limitations, in this study, inorganic silica sol was used to modify organic PVA. The tensile results show that the tensile strength and Young’s modulus of these hybrid films were greatly improved compared to the neat PVA film. For the sample containing 20 wt% silica, compared to PVA matrix, considerable increases in tensile strength and Young’s modulus by factors of 1.9 and 3.2, respectively, were achieved. The solubility measurements showed that the hybrid has an enhanced water resistance, in other words, the solubility and degree of swelling decreased with the addition of silica. FTIR, DSC, XRD, and ESEM were used to investigate the chemical and crystal structure of the hybrids, morphology, and composition of the particles in the matrix, respectively. Strong interfacial bonding between the silica and the PVA matrix and homogenous distribution of the silica particles in PVA are supportive of markedly improved mechanical strength. These modified properties of PVA with the addition of silica broaden the applications of PVA, especially giving insight in to the applications of PVA in medical materials.
Yang, C.C., Lin, S.J. and Wu, G.M. ( 2005). Study of Ionic Transport Properties of Alkaline Poly(vinyl) Alcohol-based Polymer Electrolytes, Mater. Chem. Phys., 92(1): 251-255.
2.
Burczak, K. , Gamian, E. and Kochman, A. ( 1996). Long-Term in vivo Performance and Biocompatility of Poly(vinyl alcohol) Hydrogel Macrocapsules for Hybrid-Type Artificial Pancreas, Biomaterials, 17(24): 2351-2356.
3.
Xiao, S.D., Feng, X.S. and Huang, R. ( 2007). Investigation of Sorption Properties and Pervaporation Behaviors Under Different Operating Conditions for Trimesoyl Chloride-crosslinked PVA membranes, J. Membrane. Sci., 302(1-2): 36-44.
4.
Hong, P.D. and Miyasaka, K. ( 1994). Structure of the Amorphous Phase in Highly Drawn Poly(vinyl alcohol) Fibers. Polymer, 35(7): 1369-1374.
5.
Jenni, A., Holzer, L., Zurbriggen, R. and Herwegh, M. ( 2005). Influence of Polymers on Microstructure and Adhesive Strength of Cementitious Tile Adhesive Mortars, Cement Concrete Res., 35(1): 35-50.
6.
Wang, X.F., Fang, D.F., Yoon, K., Hsiao, B. and Chu, B. ( 2006). High Performance Ultrafiltration Composite Membrane Based on Poly(vinyl alcohol) Hydrogel Coating on Crosslinked Nanofibrous Poly(vinyl alcohol) Scaffold. J. Membrane. Sci., 318(1-2): 261-268.
7.
Jeong, S.K., Jo, Y.K. and Jo, N.J. ( 2006). Decoupled Ion Conduction Mechanism of Poly(vinyl alcohol) based Mg-conducting Solid Polymer Electrolyte. Electrochem. Acta, 52(4): 1549-1555.
8.
Oka, M., Chang, Y.S., Nakamura, T., Ushio, K., Toguchida, J. and Gu, H.O. ( 1997). Synthetic Osteochondral Replacement of the Femoral Articular Surface, J. Bone Joint Sur. Bri., 79(6): 1003-1007.
9.
Stammen, J.A. , Williams, S., Ku , D.N. and Guldberg, R.E. (2001). Mechanical properties of a Novel PVA Hydrogel in Shear and Unconfined Compression , Biomaterial, 22(8): 799-806.
10.
Chang, I.S. , Kim, C. and Nam , B.U. (2005). The Influence of Poly-vinyl-alcohol (PVA) Characteristics on the Physical Stability of Encapsulated Immobilization Media for Advanced Wastewater Treatment , Process Biochem. , 40(9): 3050-3054.
11.
Gudeman, L.F. and Peppas, N.S. (1995). pH-sensitive membranes from Poly(vinyl alcohol)/Poly (acrylic acid) Interpenetrating Networks . J. Membrane. Sci., 107(3): 239-248.
12.
Hickey, A.S. and Peppas, N.A. (1995). Mesh Size and Diffusive Characteristics of Semicrystalline Poly(vinyl alcohol) Membranes Prepared by Freezing/Thawing Techniques, J. Membrane. Sci. , 107(3): 229-237.
13.
Razzak, M.T. , Zainuddin, E., Dewi , S.P., Lely, H. and Taty, E. (1999). The characterization of dressing component materials and radiation formation of PVA-PVP hydrogel . Radiation Phys. Chem., 55(2): 153-165.
14.
Fernandes, D.M., Winkler Hechenleitner , A.A., Job , A.E., Radovanocic, E. and Gomez Pineda, E.A. ( 2006). Thermal and Photochemical Stability of Poly(vinyl alcohol)/Modified Lignin Blends. Polym. Degrad Stabil., 91(5): 1192-1201.
15.
Kim, D.S. , Park, H.B., Rhim, J.W. and Lee , Y.M. (2004). Preparation and Characterization of crosslinked PVA/SiO2 Hybrid Membranes Containing Sulfonic Groups for Direct Methanol Fuel Cell Applications, J. Membrane. Science, 240(1-2): 37-48.
16.
Li, Z.L. , Han, W., Kozodaev , D., Brokken-Zijp, J.C.M., With, G.D. and Thvne, P.C. ( 2006). Surface Properties of Poly(dimethylsioxane)-based Inorganic/Organic Hybrid Material. Polymer, 47(4): 1150-1158.
17.
Liu, Y.L. , Su, Y.H. and Lai , J.Y. (2004). In Situ Crossslinking of Chitosan and Formation of Chitosan-silica Hybrid Membranes with Using γ-glycidoxypropyltrimethoxysilane as a Crosslinking Agent, Polymer, 45(20): 6831-6837.
18.
Parida, S.K. , Dash, S., Patel , S. and Mishra, S. (2006). Adsorption of Organic Molecules on Silica Surface. Adv. Colloid Interfac., 121(1-3): 77-110.
19.
Gunko, V.M. , Pissis, P., Spanoudaki, A., Zarko, V.I., Nychiporuk, Y.M., Andriyko, L.S., Goncharuk, E.V., Leboda, R., Skubiszewska-zieba , J., Osovskii, V.D. and Ptushinskii, Y.G. ( 2007 ). Relaxation Phenomena in Poly(vinyl alcohol)/Fumed Silica Affected by Interfacial Water, J. Colloid Inter. Sci., 312(2): 201-213.
20.
Guo, R.L.Ma, X.C., Hu , C.L. and Jiang, Z.Y. (2007). Novel PVA-silcia Nanocomposite Membrane for Pervaporative Dehydration of Ethylene Glycol Aquesous Solution , Polymer, 48(10): 2939-2945.
21.
Perez-Robles, J.F., Garacia-Rodriguez , F.J., Yanez-Limon, J.M., Espinoza-Beltran, F.J., Vorobiev, Y.V. and Gonalez-Hernandez, J. ( 1999). J. Phys. Chem. Solids, 60(10): 1729-1736.
22.
Arafa, I.M. , Fares, M.M. and Barhan, A.S. ( 2004). Sol-gel Preparation and Properties of Interpenetrating, Encapsulating and Blend Silica-based Urea-formaldehyde Hybrid Composite Materials. Eur. Polym. J., 40(7): 1477-1487.
23.
Chan, C.K. and Chu, I.M. ( 2001). Effect of Hydrogen Bonding on the Glass Transition Behavior of Poly(acrylic acid)/Silica Hybrid Materials Prepared by Sol-gel Process . Polymer, 42(14): 6089-6093.
24.
Lin, C.W. , Thangamuthu, R. and Yang, C.J. (2005). Proton-conducting Membranes with High Selectivity from Phosphotungstic Acid-doped Poly(vinyl alcohol) for DMFC Applications. J. Membrane. Sci. , 253(1-2): 23-31.
25.
George, J., Kumar, R., Sajeevkumar, V.A., Sabapathy, S.N., Vaijapurkar, S.G., Kumar, D., Kchawahha, A. and Bawa, A.S. ( 2007). Effect of γ-Irradiation on Commercial Polypropylene Based Mono and Multi-Layered Retortable Food Packaging Materials, Radiat. Phys. Chem., 76(7): 1205-1212.
26.
Yu, Y.Y. , Chen, C.Y. and Chen, W.C. (2003). Synthesis and Characterization of Organic-Inorganic Hybrid Thin Films from Poly(acrylic) and Mono-dispersed Colloidal Silica, Polymer , 44(3): 593-601.
27.
Xu, Y., Li, Z.H., Fan, W.H., Wu, D., Sun, Y.H., Rong, L.X. and Dong, B.Z. ( 2004). Density Fluctuation in Silica-PVA Hybrid Gels Determined by Small-angle X-ray Scattering, Appl. Surf. Sci. , 225(1-4): 116-123.
28.
Liu, X.H. , Wu, Q.J., Berglund, L.A. and Qi , Z.N. ( 2002). Investigation on Unusual Crystallization Behavior in Polyamide 6/Montmorillonite Nanocomposites, Macromol. Mater. Eng., 287(8): 515-522.
29.
Peppas, Hansen, P.J. (1982). Crystallization Kinetics of Poly(vinyl alcohol), J. Appl. Polym. Sci., 27(12): 4787-4797.
30.
Carraher Jr, C.E. and Pittmn Jr , C.U. (2001). Industrial Polymers Handbook, p. 1284, Wiley-VCH, Weiheim.
31.
Aoi, K. , Takasu, A. and Okada, M. (2000). DNA-based Polymer Hybrids. Part 1. Compatibility and Physical Properties of Poly(vinyl alcohol)/DNA Sodium Salt Blend. Polymer, 41(8): 2874-2853.
32.
Kim, J.M. and Lee, Y.M. (2001). Gas Permeation Properties of Poly(amide-6-b-ethylene oxide)-silica Hybrid Membranes, J. Membrane. Sci., 193(2): 209-225.
33.
Hong, P.D., Chen, J.H. and Wu, H.L. ( 1998). Solvent Effect on Structural Change of Poly(vinyl alcohol) . J. Appl. Polym. Sci., 69(12): 2477-2486.
34.
Hassan, C.M. , Ward, J.H. and Peppas, N.A. (2000). Modeling of Crystal Dissolution of Poly(vinyl alcohol) Gels Produced by Freezing/Thawing Process . Polymer, 41(18): 6729-6739.
35.
Wagner, H.D. , Lourie, O., Feliman , Y. and Tenne, R. (1998). Stress-induced Fragmentation of Multiwall Carbon Nanotubes in a Polymer Matrix, Appl. Phys. Lett., 72(2): 188-190.
36.
Gehrke, S.H. and Lee, P.I. (1990). Hydrogels for Drug Delivery Systems. In: Specialized Drug Delivery Systems Manufacturing and Production Technology, 8(41): 333-392.
