Studies on Mechanical Performance and Water Absorption of Recycled Newspaper/Glass Fiber-reinforced Polypropylene Hybrid Composites

Abstract

The present experimental work is aimed at studying the performance of recycled newspaper and recycled newspaper/glass fiber hybrid polypropylene composites. The effects of glass fiber loading and maleic anhydride (MA) as a coupling agent on the tensile behavior and impact strength of composites containing 30 wt% fiber were examined. The results suggest that the tensile strengths of the recycled newspaper/PP composites increase with increasing glass fiber content. A value of 55 MPa for tensile strength and 4.1 GPa for the tensile modulus is achieved from a hybrid composite containing 10 wt% of newspaper and 20 wt% of glass fiber. The impact strength of the newspaper/PP composites progressively decreased with increasing glass fiber content. Adding (MA) by 2 wt% in the composite formulation significantly improved both the dimensional stability and mechanical properties. Microstructure analysis of the fractured surfaces of modified composites confirmed improved interfacial bonding. Dimensional stability and strength properties of the composites can be improved by increasing the glass fiber content and or by addition of coupling agent. This project has shown that the composites treated with glass fiber and coupling agents will be desirable as building materials due to their improved stability and strength properties.

Keywords

hybrid fiber newspaper fiber glass fiber composite dimensional stability.

Get full access to this article

View all access options for this article.

References

Mohanty, A. , Misra, M. and Hinrichesn, G. ( 2000). Biofibers, Biodegradable Polymers and Biocomposites: An Overview, Macromol. Mater. Eng., 1: 276-277.

Bledzki, A.K. and Gasssan, J. (1999). Composite Reinforced with Cellulose Based Fibre, Prog. Polym. Sci., 24: 221-274.

Corbiere-Nicollier, T. , Gefller, L. , Lundquist, L. , Manson, J. and Jolliet, O. (2001). Life Cycle Assessment of Biofibres Replacing Glass Fibres as Reinforcement in Plastics, Res., Conserv. Recycl., 33: 267-287.

Omidvar, A. and Sabetraftar, H. ( 2000). An Investigation of Fabrication Wood Fibre-polyester Composite using Recycling Newspaper Fibre, Iranian J. Natural Res., 53: 187-199.

Yadav, A. , Nema, S. and Varghese, S.K. ( 1999). Newspaper-reinforced Plastic Composite Laminates: Mechanical and Water Uptake Characteristics, Polymer Eng. and Sci., 39: 1550-1557.

Shakeri, A. , Seliani, L. and Omidvar, A. ( 2002). An Investigation of Fabrication Cellulose Fibers-polymer using Recycled Polystyrene and Waste Newspaper, Iranian J. Natural Res., 52: 407-417.

Ren, S. and Hon, D.N. ( 1993). Newspaper Fiber-reinforced Polypropylene Composite, J. Reinf. Plast. Compos., 12: 1311-1322.

Sanadi, A.R. , Young, R.A. , Clemons, C. and Rowell, R.M. ( 1994). Recycled Newspaper Fibres as Reinforcing Fillers in Thermoplastics: Part I. Analysis of Tensile and Impact Properties in Polypropylene, J. Reinf. Plast. Compos., 13: 54-67.

Hon, D. and Ren, S. ( 2003). Interfacial Phenomena of Newspaper Fibre - Reinforced Polypropylene Composite, Part 1: The Development of Interfacial Interaction , J. Reinforc. Plast. Compos., 22: 957-871.

10.

Huda, M.S. , Drzal, L.T. , Williams, K. and Mielewski, D.F. ( 2005). A Study on Biocomposites from Recycled Newspaper Fiber and Poly(lactic acid), Ind. and Eng. Chem. Res., 44: 5593-5601.

11.

Osman, H. , Ismail, H. and Martiatti, M. ( 2008). The Effect of Recycled Newspaper Content and Size on the Properties of Polypropylene (PP)/Natural Rubber (NR) Composite, Polym . Plast. Technol. Eng., 47: 23-29.

12.

Yuan, X. , Zhang Y. and Zhang, X. ( 1999). Malted Polypropylene as a Coupling Agent for Polypropylene - Waste Newspaper Flour Composite, J. Appl. Poly. Sci., 17: 333-337.

13.

Ebrahimi, G. and Safarzadeh, S. (2000). The Study of Mixing Natural Cellulose Fibre-high Density Polyethylene and Investigation of Mechanical Properties Composites, Iranian J. Natural Res., 53: 217-226.

14.

Anuar, H. , Ahmad, S.H. , Rasid, R. , Ahmad, A. and Wan Busu, W.N. ( 2008). Mechanical Properties and Dynamic Mechanical Analysis of Thermoplastic-natural-rubber-reinforced Short Carbon Fiber and Kenaf Fiber Hybrid Composites, J. Appl. Poly. Sci., 107: 4043-4052.

15.

Tungjitpornkull, S. , Chaochanchaikul K. and Sombatsompop, N. (2007). Reinforced Wood/PVC Composites Mechanical Characterization of E-chopped Strand Glass Fiber, J. Thermoplas. Compos. Mater., 20: 535-550.

16.

Srivastav, A.K. , Behera, M.K. and Ray, B.C. (2007). Modifications Loading Rate Sensitivity of Jute/ Glass Hybrid Reinforced Epoxy Composites: Effect of Surface Modifications, J. Reinforc. Plast. Compos., 26: 851-862.

17.

Aquino, E.M. , Sarmento, L.P.S. and Oliveira , W. (2007). Moisture Effect on Degradation of Jute/Glass Hybrid Composites, J. Reinforc. Plast. Compos., 26: 219-233.

18.

Kalaprasad, G. , Francis, B. , Thomas, S. , Kumar, R. , Pavithran, C. , Groeninck, G. et al. (2004). Effect of Fibre Length and Chemical Modifications on the Tensile Properties of Intimately Mixed Short Sisal/Glass Hybrid Fiber Reinforced Low Density Polyethylene Composites, Polym. Int., 53: 1624-1638.

19.

Mishra, S. , Mohanty, A.K. , Drzal, L.T. , Misra, M. , Parija, S. , Nayak, S.K. et al. (2003). Studies on Mechanical Performance of Biofibre/Glass Reinforced Polyester Hybrid Composites, Compos. Sci. Technol. , 63: 1377-1386.

20.

Thwe, M.M. and Liao, K. ( 2002). Tensile Behavior of Modified Bamboo-glass Fiber Reinforced Hybrid Composites, Compos A., 33: 43-51.

21.

Panthapulakkal, S. and Sain, M. (2007). Injection-molded Short Hemp Fiber/Glass Fiber-reinforced Polypropylene Hybrid Composites - Mechanical, Water Absorption and Thermal Properties, J. Appl. Polym. Sci. , 103: 2432-2441.

22.

American Society for Testing and Materials (2002). ASTM D618-99: Annual Book of ASTM Standards, ASTM, West Conshohocken, PA.

23.

American Society for Testing and Materials (1997). ASTM D256-97: Annual Book of ASTM Standards, 100 Barr Harbor Dr, West Conshohocken, PA 19428.

24.

American Society for Testing and Materials (2002). ASTM D570-98: 2002 Annual Book of ASTM Standards, ASTM, West Conshohocken, PA.

25.

Rozman, H.D. , Tay, G.S. , Kumar, R.N. , Abusamah, A. , Ismail, H. and Mohd Ishak, Z.A. (2001). Polypropylene-oil Palm Empty Fruit Bunch-glass Fibre Hybrid Composites: A Preliminary Study on the Flexural and Tensile Properties, Eur. Polym. J., 37: 1283-1291.

26.

Fu, S.Y. and Lauke, B. ( 1996). Effect of Fiber Length and Fiber Orientation Distributions on the Tensile Strength of Short-fiber-reinforced Polymers, Compos. Sci. Technol., 56: 1179-1190.

27.

Matuana, L.M. , Balatinecz, J.J. , Sodhi, R.N.S. and Park, C.B. (2001). Surface Characterization of Esterified Cellulosic Fibers by XPS and FTIR Spectroscopy, Wood Sci. Technol., 35: 191-201.

28.

Stokke, D.D. and Gardner, D.J. ( 2003). Fundamental Aspects of Wood as a Component of Thermoplastic Composites, J. Vinyl and Additive Technol., 9: 96-104.