In this article, an original survey on the stresses between the structure and the fibers composite (FRP) was finalized, taking into account, the mechanical and thermal load and the effects of the FRP plate fibers orientation. This originality, puts in evidence a new approach theory and the physical and geometric parameters coupled with the thermal model, which is one aspect that has not be taken into account by previous studies.
Delate, F. and Erdogan, F. ( 1981). Viscoelastic Analysis of Adhesively Bonded Joints, J. Appl. Mech., 48: 331-338.
2.
Reddy, J.N. and Roy, S. ( 1988). Non-linear Analysis of Adhesively Bonded Joints, J. Appl. Mech., 23(2): 97-112.
3.
William, C.C. (1991). A Comparison of Numerous Lap Joint Theories Bonded Joints, J. Adhesion Adhesives, 35: 55-73.
4.
Richardson, G., Crocombe, A.D. and Smith, P.A. (1993). A Comparison of Two and Three-dimensional Finite Element Analyses of Adhesive Joints, Int. J. Adhesion Adhesives, 13(3): 193-200.
5.
Chien-Chang, L. and Yee-Shown, L. (1993). A Finite Element Model of Single Lap Adhesive Joints, Int. J. Solids Struct., 30(12): 1679-1692.
6.
Tsai, M.Y. and Morton, J. ( 1994). An Evaluation of Analytical and Numerical Solutions to the Single-lap Joint, Int. J Solids Struct., 31(18): 2537-2563.
Chen, D. and Shun, C. ( 1983). An Analysis of Adhesive-bonded Single-lap Joints, J. Appl. Mech., 50: 109-115.
11.
An, W., Saadatmanesh, H. and Ehsani, M.R. ( 1991). RC Beams Strengthened with FRP Plates: II. Analysis and Parametric Study, J. Struct. Eng. ASCE, 117(11): 3434-3455.
12.
Saadatmanesh, H. and Ehsani, M.R. (1991). RC Beams Strengthened with GFRP Plates: I. Experimental Study, J. Struct. Eng. ASCE , 117(11): 3417-3433.
13.
Sharif, A., Al-Sulaimani, G.J., Basunbul, I.A., Baluch, M.H. and Ghaleb, B.N. ( 1994). Strengthening of Initially Loaded Reinforced Concrete Beams Using FRP Plates, ACI Struct. J., 91(2): 160-168.
14.
Chajes, M.J. , Thomson Jr, T.A., Januszka, T.F. and Finch Jr, W.W. (1994). Flexural Strengthening of Concrete Beams Using Externally Bonded Composite Materials, Construct. Build. Mater., 8(3): 191-201.
15.
Malek, M., Saadatmanesh, H. and Ehsani, M.R. ( 1998). Prediction of Failure Load of R/C Beams Strengthened with FRP Plate due to Stress Concentration at the Plate End, ACI Struct. J., 95(2): 142-152.
16.
Saadatmanesh, H. and Malek, A.M. (1998). Design Guidelines for Flexural Strengthening of RC Beams with FRP Plates, J. Compos. Construct. ASCE, 2(4): 158-164.
17.
Smith, S.T. and Teng, J.G. (2002). FRP-strengthened RC Beams. I: Review of Debonding Strength Models, Eng. Struct. , 24(4): 385-395.
18.
Smith, S.T. and Teng, J.G. (2002). FRP-strengthened RC Beams. II: Assessment of Debonding Strength Models, Eng. Struct., 24(4): 397-417.
19.
Chen, J.F. and Teng, J.G. ( 2003). Shear Capacity of FRP-strengthened RC Beams: FRP Debonding, Construct. Build. Mater., 17: 27-41.
20.
Vilnay, O. ( 1988). The Analysis of Reinforced Concrete Beams Strengthened by Epoxy Bonded Steel Plates, Int. J. Cement Compos. Lightweight Concrete, 10(2): 73-78.
21.
Roberts, T.M. (1989). Approximate Analysis of Shear and Normal Stress Concentrations in Adhesive Layer of Plated RC Beams, Struct. Eng. London, 67(12): 229-233.
22.
Roberts, T.M. and Haji-Kazemi, H. (1989). A Theoretical Study of the Behaviour of Reinforced Concrete Beams Strengthened by Externally Bonded Steel Plates, Proc. Inst. Civil Eng., 87(part 2): 39-55.
23.
Taljsten, B. ( 1997). Strengthening of Beams by Plate Bonding, J. Mater. Civil Eng. ASCE, 9(4): 206-212.
24.
Smith, S.T. and Teng, J.G. ( 2001). Interfacial Stresses in Plated RC Beams, Eng. Struct., 23(7): 857-871.
25.
Tounsi, A. and Benyoucef, S. ( 2007). Interfacial Stresses in Externally FRP-plated Concrete Beams, Int. J. Adhesion & Adhesives, 27: 207-215.
26.
Lau, K.T. , Dutta, P.K., Zhou, L. .M. and Hui , D. (2001). Mechanics of Bonds in a FRP Bonded Concrete Beam, J. Compos. Part B, 32: 491-502.
27.
Tounsi, A. ( 2006). Improved Theoretical Solution for Interfacial Stresses in Concrete Beams Strengthened with FRP Plate, Int. J. Solids Struct., 43(14-15): 4154-4174.
28.
Kerboua, B., Adda Bedia, E., Tounsi, A. and Benyoucef, S. ( 2008). Improved Theoretical Solution to Study the Interfaces of Deformable Hybrid Structures, Reinforced by Composites (FRP), Materiaux & Techniques, 96(1-2): 49-64.
29.
Herakovich, C.T. ( 1998). Mechanic of Fibrous Composites, Wiley , USA.
30.
Hyer, M.W. ( 1998). Stress Analysis of Fiber-Reinforced Composite Material , McGraw Hill, USA.
